I just installed a set of hi lo combo and when I put the headlights on low beams, they come on highbeams and when I pull the lever to put highbeams on, they go to the low beams. I don’t understand why.
I would also like to know why the LED fog lights won't turn on with the low beam HID'S. I think there isn't enough power to allow the fog lights to turn on. Do you think a relay harness for the HID's will allow the LED fog lights to turn? The vehicle is a 2009 Dodge Ram 1500 and it has the 55 watt HID kit in the low beams and LED bulbs in the fogs.
I bought a fog light kit for my car and it came with a harness. Can I use that harness instead of re-wiring the car with the HID harness?....can I just plug my bulbs and ballast into the current harness I have in my fog lights?
+Nathan Spain no problem the one I’m using in this video it really good I just pay $48.99 on Amazon and I believe for your low beams you need 9005, and I recommend this kit because is no flickering, the color is solid
+Nathan Spain Zdatt 12000LM 9005 H10 HB3 LED HeadLight Bulbs Conversion Kit 100W Full Lights High Beam 360 Degree Lighting for Car Lamp Replacement-Amber(3000K)/Whi www.amazon.com/dp/B01JS7L4R8/ref=cm_sw_r_cp_apip_GuQ7BFgJNjwtk
Is better but in my case I have wire harness on my accord for more than 3 year with no problems but right now I have HID’s on the rav4 with no wire harness and no problems, is up to you if you want to do it!!
Bullet Solano yes I will try, I would like to buy a good ballast 55W / 35 W for another car TOYOTA Corolla 2009 please you can send me a link to buy thank you
If you watch the entire video you know what I was doing, that other dumb comment is from brainless people, that’s why I didn’t even have to answer nonsense 😂😂
👍
I bought the 55w Innovative hid kit with relay from Amazon. Do I still need the error free adapter cable?
No you don’t need it
Does the connection work with the H4 factory harness from car. I'm trying to convert from H4 to H1 so I can use the retrofit headlight projector
+osidecoqui yes you shouldn’t have any problems because in my accord I use h1 with the retrofit projectors
I just installed a set of hi lo combo and when I put the headlights on low beams, they come on highbeams and when I pull the lever to put highbeams on, they go to the low beams. I don’t understand why.
Sounds like you put the connectors backwards
I would also like to know why the LED fog lights won't turn on with the low beam HID'S. I think there isn't enough power to allow the fog lights to turn on. Do you think a relay harness for the HID's will allow the LED fog lights to turn? The vehicle is a 2009 Dodge Ram 1500 and it has the 55 watt HID kit in the low beams and LED bulbs in the fogs.
Try the relay harness but I’m not guaranteed that is going to work, but I’m 80% sure that is going to work
i did exactly as you i turned it on it work and then in put it inside the light and i turned it on it didn't work? any advice?
Check your fuse
I can’t find that type of harness for my 2020 kia sportage. I need that exact harness what is it call and where is the best place to get it
You can fine a wire harness anywhere online just look for the type of connector you’re lights has
Hi sir i install hids on my foglamp but my fuse blown. Do i need relay harness?
Hi, yes
@@BulletSolano thank you sir
Where do I connect the wire of lens projector?
You talking about the stuck connector? That one goes to the wire harness!! Follow the video
@@BulletSolano not that one, the wires of lens the that's operating solenoid in lens.
I don’t think my car has that wire I didn’t remove any wire from the solenoid
@@BulletSolano ohh okay anyways thanks for the reply
i order 2 Wire Harness kits, because i have BI-HID setup, 4 Bulbs total, or did i just need One?
If you running HID’s on both that’s ok
The best ✅, I sell a lot innovited ballast here in Massachusetts
I bought a fog light kit for my car and it came with a harness. Can I use that harness instead of re-wiring the car with the HID harness?....can I just plug my bulbs and ballast into the current harness I have in my fog lights?
If you have a harness already I don’t see why not
Thanks
No problem
Nice how do they perform at night? And how long did they last and would u recommend this his kit
Really bright at night and I still have the wire harness, I do recommend it
@@BulletSolano thanks
No problem
How long did they end up lasting for you? I just installed them this morning. Thank you!
@@wildncrazyguytv how are they are they bright?
Can you recommend an HID or LED kit for my 2001 Honda Accord LX?
+Nathan Spain no problem the one I’m using in this video it really good I just pay $48.99 on Amazon and I believe for your low beams you need 9005, and I recommend this kit because is no flickering, the color is solid
+Nathan Spain Zdatt 12000LM Super Bright 100W HB4 9006 LED Headlight Bulbs 360 Degree Low Beam Fog Light Bulbs Conversion Kits Car Driving Lamps Replacement-Amber(3000K) /White(6000K) /Blue(8000K)-2 Yr Warranty www.amazon.com/dp/B01M70NGNJ/ref=cm_sw_r_cp_api_DFw6zbWQK3M08
+Nathan Spain Zdatt 12000LM 9005 H10 HB3 LED HeadLight Bulbs Conversion Kit 100W Full Lights High Beam 360 Degree Lighting for Car Lamp Replacement-Amber(3000K)/Whi www.amazon.com/dp/B01JS7L4R8/ref=cm_sw_r_cp_apip_GuQ7BFgJNjwtk
+Nathan Spain that’s the led kit if you lookin for hid’s let me know
Bullet Solano Thank you!!!
Is the harness suitable for both h11 and 9006?
Only h11
old video, but thank you!
hi to install HID WITH BALLAST FOR TOYOTA RAV4 2016 it is better to install with wiring harness the not need wiring harness
Is better but in my case I have wire harness on my accord for more than 3 year with no problems but right now I have HID’s on the rav4 with no wire harness and no problems, is up to you if you want to do it!!
Ok try those
Bullet Solano yes I will try, I would like to buy a good ballast 55W / 35 W for another car TOYOTA Corolla 2009 please you can send me a link to buy thank you
Ok I’ll send you that one later
Bullet Solano thank you
🤔🤔🤔🤔🤔…..😂😂😂 why you took the bumper out for that installation, I don’t work that way ….but I respect that
The lenses cannot be removed without removing bumper
If you watch the entire video you know what I was doing, that other dumb comment is from brainless people, that’s why I didn’t even have to answer nonsense 😂😂
I wouldn't be able to sleep at night if I did a wiring hack job like that.
I have the same kit with no relay cable do I need one?
Yes
@@BulletSolanook thank you I appreciate it