Hey everyone! I apologize for the horrible contrast with the white filament. I buy about 90% of my filament in white and all I had on hand was a little bit of grey. I will be sure to give you guys a much better prepared video in my next one. You should have seen how many shots I had to take with different cameras just to get you guys what is in the video. Again my mistake, I am still learning on all of this and totally take the blame!
NP! I am loving your videos btw. I feel well prepared for when my first P1S arives tomorrow! I am upgrading from an EnderV2, so I guess I am in for a treat. Would love to see you experiment more with the ironing. (With black filament of course 😉)
Thank you! Curious to know what filament type did you use for this video and if changing the filament type would improve results or not in your advanced video version.
Since the creation of this video many of the ironing features have changed. I will most likely do a follow up video on the ironing feature in the near future. This industry moves at lightspeed!
Why not use a black/dark filament? White is commonly known to be among the best for hiding layer lines and imperfections due to low contrast. Black filament would almost certainly be a better fit for tests like this.
@@koifish1le996 I completely agree with you. Unfortunately all I had was white and a little bit of dark grey. I apologize for the bad contrast and I should have spray painted the filament to make up for this. My next video on ironing or anything to do with quality I will be sure to have black on hand.
Ya I agree with that. I feel the least amount of directional changes in ironing the better. Rectilinear ironing gives you the best option for this. It was definitely an eye opener to see the results first hand and compare them.
🤘BITCHIN🤘Always great content here, Thankyou. A small warp can mess up the top layers, so i use a brim or mouse ears to hold it close, also most of the time when i use ironing i print one whole model at a time. I do these when perfection REALLY matters👍
Looking forward to a more detailed Video explaining the settings! Hope its still on your list I had Problems with ironing when there was only a thin Text on the top surfaces. Somehow it got it all squished and unreadable
Yes it is still on my list but I am running very behind at the moment. I have been on vacation then caught COVID so I am trying to recover and get back into more editing. I have 3 videos that I am working on currently. If you haven't already I would like to invite you to sub my channel so you don't miss out on any of my upcoming videos! Hope your day has been awesome!
Cool explanation for newbies. What I am struggling is: when there are letters (in another color!) on top of a flat surface, the flat surface is being ironed with the contour of the letters. That is messing the ironing up totally. Why is the flat surface just not ironed completely? and then on top the letters with other Filament color should be printed. Have no idea how to get this done in orcaslicer. Would also help to not jump around many times. Ironing should be without hops around the surface...
Amazing results; appreciate the demo and mini guide. I happen to notice it was done on the X model of the printer; I may have not noticed, but can't be done with A1 mini?
@@bambamprintyeah in rectilinear when the path changes length it will change the looks (especially with words that are flush with the rest of the object)
@@bambamprint Oh, really? That's too bad. I suppose other settings like layer height and layer width might be more effective. The overall speed might also make a difference. I'm looking forward to the next experiments. Thanks.
No unfortunately I have been on vacation then came down with COVID. I am trying to recover so I can get back to recording but my voice has been completely gone!
There is a better solution to Panama's water problems: reducing water usage. Several techniques are available, including pumping water back using energy generated by the water drained down, using intermediate tanks for the top portion of the drainage which is then used to do the first part of the filling up, and more, and it's estimated that they could reduce water usage by 60-70% with a reasonable investment.
@@TheHanutaXD haha you know after I published the video I remembered on my variable layer height video I spray painted the prints with a matte black so that it would show up better.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Hey everyone! I apologize for the horrible contrast with the white filament. I buy about 90% of my filament in white and all I had on hand was a little bit of grey. I will be sure to give you guys a much better prepared video in my next one. You should have seen how many shots I had to take with different cameras just to get you guys what is in the video. Again my mistake, I am still learning on all of this and totally take the blame!
NP! I am loving your videos btw. I feel well prepared for when my first P1S arives tomorrow! I am upgrading from an EnderV2, so I guess I am in for a treat.
Would love to see you experiment more with the ironing. (With black filament of course 😉)
You took the words right out of my mouth. "Liked" it anyhow. Thanks
Thank you! Curious to know what filament type did you use for this video and if changing the filament type would improve results or not in your advanced video version.
Since the creation of this video many of the ironing features have changed. I will most likely do a follow up video on the ironing feature in the near future. This industry moves at lightspeed!
Super cool how each object can be individually modified.
Yep great feature!
Please make the advanced ironing video
Can you use ironing on a top contoured surface?
No Ironing is only used for flat surfaces.
Thank you for doing these tests. They definitely help with my learning curve.
You're welcome. Apologies for the use of white filament. I plan on doing a follow-up video to fix my mistake with this. Glad to have you aboard!
Why not use a black/dark filament? White is commonly known to be among the best for hiding layer lines and imperfections due to low contrast. Black filament would almost certainly be a better fit for tests like this.
@@koifish1le996 I completely agree with you. Unfortunately all I had was white and a little bit of dark grey. I apologize for the bad contrast and I should have spray painted the filament to make up for this. My next video on ironing or anything to do with quality I will be sure to have black on hand.
Seems like in general, Rectilinear is the way to go. Great video, I learned something new!
Ya I agree with that. I feel the least amount of directional changes in ironing the better. Rectilinear ironing gives you the best option for this. It was definitely an eye opener to see the results first hand and compare them.
🤘BITCHIN🤘Always great content here, Thankyou. A small warp can mess up the top layers, so i use a brim or mouse ears to hold it close, also most of the time when i use ironing i print one whole model at a time. I do these when perfection REALLY matters👍
You are absolutely right. Great tips I will make a note and include on my next video.
Looking forward to a more detailed Video explaining the settings! Hope its still on your list
I had Problems with ironing when there was only a thin Text on the top surfaces. Somehow it got it all squished and unreadable
Yes it is still on my list but I am running very behind at the moment. I have been on vacation then caught COVID so I am trying to recover and get back into more editing. I have 3 videos that I am working on currently. If you haven't already I would like to invite you to sub my channel so you don't miss out on any of my upcoming videos! Hope your day has been awesome!
Cool explanation for newbies.
What I am struggling is: when there are letters (in another color!) on top of a flat surface, the flat surface is being ironed with the contour of the letters. That is messing the ironing up totally. Why is the flat surface just not ironed completely? and then on top the letters with other Filament color should be printed. Have no idea how to get this done in orcaslicer. Would also help to not jump around many times. Ironing should be without hops around the surface...
Great test. Thankyou
you are welcome
Amazing video 🎉🎉🎉
Thank you so much for the support! Have a great weekend.
Amazing results; appreciate the demo and mini guide. I happen to notice it was done on the X model of the printer; I may have not noticed, but can't be done with A1 mini?
Everything in this video can be done in the A1.
Yeah I have an issue on complex top surfaces where there a different surface finneshes
Are you using the ironing feature?
@@bambamprintyeah in rectilinear when the path changes length it will change the looks (especially with words that are flush with the rest of the object)
Hi,
Could the last test have been affected by the color switch?
The difference was unexpectedly significant compared to the third batch.
I had thought the same thing so I went ahead and printed the entire logo in white and it yielded the exact same issues.
@@bambamprint Oh, really? That's too bad. I suppose other settings like layer height and layer width might be more effective. The overall speed might also make a difference. I'm looking forward to the next experiments. Thanks.
Did you ever make the advance ironing video?
Not yet, it is on my todo list!
Have u made the advanced ironing video yet?
No unfortunately I have been on vacation then came down with COVID. I am trying to recover so I can get back to recording but my voice has been completely gone!
There is a better solution to Panama's water problems: reducing water usage. Several techniques are available, including pumping water back using energy generated by the water drained down, using intermediate tanks for the top portion of the drainage which is then used to do the first part of the filling up, and more, and it's estimated that they could reduce water usage by 60-70% with a reasonable investment.
Try using an actual iron.
Use low heat with wax paper.
Might work?
I'm sure it would work! Although that could be super awkward lol
decrease flow when ironing.
Yea that would be my thought for my follow up video. Thank you for the support! Have a great weekend!
@@bambamprintI would also suggest using a different color white is hard to see on video :/
@@TheHanutaXD haha you know after I published the video I remembered on my variable layer height video I spray painted the prints with a matte black so that it would show up better.