That shot looking down on the pickup head was really cool I never saw that before 💪💪👍. Great video as always give Darcy a hug from me I miss seeing the little man 💪💪💪👍😎😎
If your running 19.5” rims on the dodge, I recommend Michelin xds2 tires. Well worth the money, I run them on my f550 service truck in northern Ontario Canada and they pull through pretty near anything and in all temps and the best wearing tire I’ve ran. Great videos, thanks for bringing us along.
I unload and load 4x5 round bales at the barn with my little Kubota L2501. It will reach across a trailer to load the far side bales and also double stack them. Having a rear bale on it a must with it unless you have a death wish lol.
@@DLHFarms yeah it’s really bad. I have been loosing a couple cutting for the past couple of years. Used have a dry spell about every 10 years but it’s different now and I went up northeast a month ago and bought a 1100 foot Bauer water reel and 500 gallons a minute water pump. Doing what we got to do!!!
So now I know...........when someone says to stick it where the sun don't shine, they are talking about that upper back corner of the field where you first got the truck and trailer back in there..................
Man you give good reviews on tractors. Everyone else is all about this brand or that and you just use them and speak your observations. Them TC loaders do stick out a bit.
Sidewinder Brand. They will cut down just about anything. Just two pillow block bearings and a special tire. I would bet the tires are getting hard to find now. Great for brush and trees. Not the best for heavy grass especially if it is moist. Tire starts slipping. When i worked with International Paper they had several five foot models. If you could push the trees over it would cut them off.
We have one of those mowers, they were factory rated to cut anything your tractor could push over, the brochure showed one mounted on a dozer with a pto.
@@DLHFarms I made that comment about 10 seconds before you said what it was in your video. Lol. You've got a nice looking Sidewinder there. I look for the tire driven ones every so often, and most of the ones I see for sale look a little rough. You're looks clean, and not bent up. My Howse's gearbox went out a few months ago. I really need to get that fixed instead of using the drum mower in its place. I was looking at Hardee bush hogs the other day, and holy cow have tractor implements skyrocketed in the last 3-4 years.
Good morning Dennis! Work, work, work. You need some rest. Speaking of which, have you ever considered the biblical theory of allowing the land to rest every seventh year so the land can rest and rejuvenate itself? Level. 25:1-7. Thanks for the ride-a-long.
I have but I’m not sure it applies for grass land, it still grows even if you don’t cut it then it’s a mess of weeds and overgrown junk. Then the land owner is mad at you and gets someone else to mow it from then own.
Dennis. Let me PayPal you a few bucks and you and Mama go down to Virginia Beach for a week. You got plenty of family to watch the youngins. That hay ain't going nowhere. Just make sure Gavin ain't hiding in your trunk before you leave. I ain't giving that slouch no free vacations. 🤣
i have a question why do you round bale when you could just big square not have to stop and go on ever bale and big squares are easer to stack and move around
Few reasons. Round baler = $50,000. Big square baler = $250,000. Tractor that can pull round baler = $120,000 Tractor that can pull a big square baler = $250,000. No market to sell big squares around here either. Everyone that has cows around here has equipment to feed round bales not big squares.
I don’t have a hired hand because the work isn’t steady, I work like crazy for 3 days or a week then it will rain and you can’t do anything on the farm.
That was an expensive fertilizer bill! I like the idea of rolling up the sod and putting it back LOL
Any fertilizer bill is expensive now a days
Enjoyed the video! Thanks for sharing.
That shot looking down on the pickup head was really cool I never saw that before 💪💪👍. Great video as always give Darcy a hug from me I miss seeing the little man 💪💪💪👍😎😎
Glade you liked it! I’ll give him a hug.
Great video Dennis, wow you're getting some good numbers off that field. 👍🏻
Thanks
Busy day. Really like the little Deere💪💪👍👍
Me too it’s proved handy
Grateful video Dennis. I have the same luck as you but running much older equipment! The struggle is real!!
Thats how it is sometimes
Keep up the good work
Thanks!
If your running 19.5” rims on the dodge, I recommend Michelin xds2 tires. Well worth the money, I run them on my f550 service truck in northern Ontario Canada and they pull through pretty near anything and in all temps and the best wearing tire I’ve ran. Great videos, thanks for bringing us along.
This truck has 17s on it
The little guy to the rescue. I told you when you bought the little deere, that you would get alot of good use out of it.
Yep I’ve put about 100 hours on it.
I liked the camera view from the top of the baler.
Awesome
I unload and load 4x5 round bales at the barn with my little Kubota L2501. It will reach across a trailer to load the far side bales and also double stack them. Having a rear bale on it a must with it unless you have a death wish lol.
Y’all are lucky having all the rain ☔️. It’s terrible here in Texas……..!!
Sorry to hear. Praying for rain for y’all. We need some hay weather here.
@@DLHFarms yeah it’s really bad. I have been loosing a couple cutting for the past couple of years. Used have a dry spell about every 10 years but it’s different now and I went up northeast a month ago and bought a 1100 foot Bauer water reel and 500 gallons a minute water pump. Doing what we got to do!!!
Good video.
Thanks
Love your videos dude............
Thanks!
So now I know...........when someone says to stick it where the sun don't shine, they are talking about that upper back corner of the field where you first got the truck and trailer back in there..................
Exactly now we know haha
Man you give good reviews on tractors. Everyone else is all about this brand or that and you just use them and speak your observations. Them TC loaders do stick out a bit.
Thanks!
lol never seen a bush hog that looks like that with a spare tire running it 🤣🤣🤣
Sidewinder Brand. They will cut down just about anything. Just two pillow block bearings and a special tire. I would bet the tires are getting hard to find now. Great for brush and trees. Not the best for heavy grass especially if it is moist. Tire starts slipping. When i worked with International Paper they had several five foot models. If you could push the trees over it would cut them off.
They are really tough and really heavy. Never had trouble with it slipping if the tire pressure was right unless it was raining.
We have one of those mowers, they were factory rated to cut anything your tractor could push over, the brochure showed one mounted on a dozer with a pto.
Those rough fields make for a long day of baling.
Yes
Gotta make hay while the sun shines.
Got that right
How do you like the 4066? Been looking at getting one but curious about the power and hydro transmission
I like it, it’s not as strong as a gear drive with similar horse power but it makes it more users friendly while doing loader work and mowing
Hello Dennis how many small squares in one your big bale? I didn't see the deer? Did I miss it? Nice work have a good day.
About 17 or 18 bales in one big bale. It’s hooked to the mower at the edge of the field probably can’t see it in this video.
We enjoy riding with you, becuz your a handsome cuss. Lots of work. How does your dad make it without you when your baling hay? Ron
I don’t know how it makes it. Haha
You got an old Sidewinder bush hog.
Yep
@@DLHFarms I made that comment about 10 seconds before you said what it was in your video. Lol.
You've got a nice looking Sidewinder there. I look for the tire driven ones every so often, and most of the ones I see for sale look a little rough. You're looks clean, and not bent up. My Howse's gearbox went out a few months ago. I really need to get that fixed instead of using the drum mower in its place. I was looking at Hardee bush hogs the other day, and holy cow have tractor implements skyrocketed in the last 3-4 years.
Good morning Dennis! Work, work, work. You need some rest. Speaking of which, have you ever considered the biblical theory of allowing the land to rest every seventh year so the land can rest and rejuvenate itself? Level. 25:1-7. Thanks for the ride-a-long.
I have but I’m not sure it applies for grass land, it still grows even if you don’t cut it then it’s a mess of weeds and overgrown junk. Then the land owner is mad at you and gets someone else to mow it from then own.
Are you allowed to take a box scraper in there and get the loose stuff off and then take the firewood truck in there and put some gravel down ??
Not supposed too
Mrs. Shannon I hope you’re watching lol I bet you would’ve made it to the field no problem
Haha
no dust in baler come south and get some lol
Sounds like it’s getting too dry down there.
Dennis. Let me PayPal you a few bucks and you and Mama go down to Virginia Beach for a week. You got plenty of family to watch the youngins. That hay ain't going nowhere. Just make sure Gavin ain't hiding in your trunk before you leave. I ain't giving that slouch no free vacations. 🤣
Haha how do you know Gavin so well?
i have a question why do you round bale when you could just big square not have to stop and go on ever bale and big squares are easer to stack and move around
Few reasons. Round baler = $50,000. Big square baler = $250,000. Tractor that can pull round baler = $120,000 Tractor that can pull a big square baler = $250,000. No market to sell big squares around here either. Everyone that has cows around here has equipment to feed round bales not big squares.
How has your dodge treated you? We like Ford's but are tempted to try dodge. They seem like they have come a long way in recent years.
114,000 miles and no issues. One set of brake shoes.
You forgot to say thankyou JESUS FOR HELPING YOU
GET OUT
I thank God every day for helping me.
At least it was a down hill walk to tractor
Haha
Do you still have a new holland? Also why have you said that you will never buy one again?
I don’t own any NH tractors. The one in the video is my dads and it’s from 2009. The new ones are total junk.
Looks like you need to bring a dozer over their and make the drive in a little wider
Can’t it’s on park service land
It seems like you do just about all the work in the fields, do you have any hired help? Would you consider hiring someone from your viewing audience?
I don’t have a hired hand because the work isn’t steady, I work like crazy for 3 days or a week then it will rain and you can’t do anything on the farm.
You need a day off 😴
I just had a week off and I’m still tired.