How to Make a Garden Trellis Fence Panel (Using FREE Pallet Wood)
Вставка
- Опубліковано 10 сер 2020
- Hi Guys,
In this video I show How to Make a Garden Trellis Fence Panel out of FREE Pallet Wood. This is a great DIY woodworking project for your garden!
Dimensions of Fence Panel: 120cm (H) x 212cm (L)
To Subscribe to the Channel click here: ua-cam.com/users/PhillWyattO...
🤝 Help Support the Channel 🤝
☕ Buy Me a Coffee: www.buymeacoffee.com/PhillWyatt
* How to Make a Fence Post Using Scrap Wood & Lap Joints!:
• How to Make a Fence Po...
* How to Build a Garden Fence out of FREE Pallet Wood!:
• How to Build a Garden ...
Check out the Channel Play Lists:
Woodworking & D.I.Y:
• How to Make a Simple P...
Gardening & Plants:
• Gardening & Plants
Workshop Build:
• Workshop Build
Restoration Projects:
• Restoration Projects
#trellis #trellisforvegetables #trellissystem
Email : phillwyattoutdoors@hotmail.com - Навчання та стиль
To Subscribe to the Channel click here: ua-cam.com/users/PhillWyattOutdoors
Absolutely beautiful!!
Thank you
Excellent project that achieves 2 purposes. One to make a great trellis and the other to clean up scrap pieces that will rot away. I will make a whole lot of trellis this spring.
Thanks! I think I will make some more trellis this summer! 👍🏻
I bet your dad is happy with you Phill, i hope you have been invited round for Sunday lunch for your efforts😊
Oh yea he was pleased with it Karl 👍 Good Idea I think I will go round for dinner this Sunday 🍽️
Great use of spare wood, nice job ⭐️⭐️⭐️
Thanks Steve 👍🏻
Very nice! Going to give this a try n use as a back drop for an above ground flower bed and as fence for the rest of my yard. Going to attempt a matching arbor with a gate and going to paint it all white. My plan is to paint all pieces, paint new rough edges then assemble.
I want to build an Arbor myself. Yea paint it before assembly I think it would be easier.
Thats beautiful
Great job
Thanks 👍🏻
Just took a large double palette apart,I had an idea on how to build it,then I run in to your video,I’m going to build it like you did,except instead of screws I’ll use 1.5” galvanized nails with a pneumatic nailer.Exellent video,thank you.👍
Sounds like a good idea. Glad you liked the video 👍🏻
Spot on !
Cheers!
Enjoyed watching your video,good job always.
Thank you 👍
Well done!
Thanks!
thank you
No problem 👍
Good job, about 30000 times quicker and easier if you paint before assembly.. from experience
Thanks👍 yea I'm sure it would have been quicker
Bet it still looks good today as it did when you made it xx
Yea Gary it needed a new coat of stain although it's still all good 👍🏻
@@PhillWyattProjects the table saw does a gd job IV got a little saw that slows and stops trying to cut some things is it the motor size what size do you think I need to cut wood simple mostly pallet wood even the thicker bits off the pallet
Well done, I’m not a great lover of pallet wood but you finished it well
Thank you very much 👍
Amazing skills there, would love to have you round for when we get our garden designed this year want to use nothing but pallets
Thanks! 👍 Pallets are great for garden projects 😃
I have an almost endless supply of pallets where I work and have just decided I'm going to make an L-shaped planter with trellis this weekend. I was going to make the planter and just buy the trellis purely for convenience and maybe a bit of laziness lol, but you've convinced me not to! This looks amazing!
I must admit half way through I was thinking it looks a bit shoddy, but when you added those finishing touches and the treatment.. Looks loads better than store bought. Excellent video!
Thanks very much 👍 it's well worth it. It's satisfying and almost free! Good luck with your build 👍 I have a few pallet wood planter build videos also on my channel if your interested.
@@PhillWyattProjects Thanks mate, will definitely check out your other videos.
You did well but i ve a question: How did you manage to take out the pallet wood so cleanly?
Thanks 👍🏻 I have a video about how to dismantle pallets on my channel. I use a tool called a pallet breaker which helps to pop off the slats.
Fab
Thanks! 👍🏻
Nice video and great reuse of scrap materials. I could listen to your accent all day ;)
Thanks Thomas 👍 never been complimented on my accent before 😁
I saw you made some small mistakes:
-When you cut wood on the tablesaw, measure it so the blade doesn't surpass the top of your wood.
-when cutting the wood at the right length, let the saw spin to speed before cutting.
these tips will lengthen the lifespan of your machine and blade!
-when adding the finish, for the first layer you could make it thinner with ethanol,whitespirit or water (depends on the base of the finish) so it soaks in faster and deeper, but that's a matter of personal preferences
overal, great job!
Good tips 👍🏻 I just need to iron out a few bad habits I think 👍🏻
What screws did you use ?
I have the many pallets for my fence project
Can't wait to get started
You did a great job
Subscribed and I am putting this vid in my DIY TIPS list
Thanks
Thank you very much! 👍 I just used standard wood screws for the trellis. Standard screws can actually last a long time outside and I have had no problem with using them outside. I'm glad you are finding the videos useful.🙂
I’m doing this but how did you put it up ?
Great build. Looks great. Might be good to buy a cheap spray gun.
Thanks Joel👍 I was thinking about a spray gun I think my dad has one that he never uses I will have to ask him about it.
great job......I thiink......but i think you could have use a few more 100 screws.....are you sure it's stong enought..?????
Better to be too strong than too weak 💪🏻
What is the size you cut the last up measure?
Not too bad. i would have split it apart to take it to your dads house and also i would have sprayed the stain on with a cheap 50 dollar sprayer. also personally i would have sanded or planed the top of the wood where you will see it just to make it look a little more professional
Cheers👍🏻 all good points. It did take too long with a brush although I don't have a sprayer. Might get one to do my fences.
Can you do this on a bandsaw? Iooked for your saw but nnot in stock anymore 😢
I wouldn't recommend using a band saw as the wood is long and it would take a long time to do. There are many cheap table saws on the market at the moment. My current table saw is made by excel and only cost around £130. They sell cheap saws which can do this job.
@@PhillWyattProjects thank you ,I'll have a look for one 😁
Suscribed, hey m8 how long pallet wood good for till it rotts
Thanks 👍 it's really hard to say because pallet wood is made of many different types of wood. If treated regularly it can last many years.
What size screws do you? use so I can buy them 😊
I think they were about 45mm
@@PhillWyattProjects thanks very much
How is your pond not covered in saw dust 😅
Haha it does go in there when the wind blows I have to scoop it out with a big fine Net
Whoever was playing that piano could have helped with the painting....would have been quicker 👍
Maybe next time I'll ask him for a Hand!