Keep in-mind, many CV Axle manufactures do NOT advise using anti-seize on the splines. I understand the concept, but there is a reason they do no want this added to such tight tolerances.
I have done this on a Rav 4 with the same transmission. It is not this easy. It’s hard to get a pry bar in there because it’s recessed in the transmission. Even if you can, it’s likely the snap ring is going to resist you. I used a slide hammer and after turning the wheel a 1/4 turn on the other side each time I pulled on it, finally it came out. If you are doing this job, I would definitely replace the axle seal which sits flush on the transmission as there is a good chance it will be damaged when you pull the old axle out. Also USE OEM axle and seal. The first time I tried AutoZone and it lasted 500 miles and sounded like clanking noises on turns. All that aftermarket stuff is made in China and it’s not worth the risk as I found out the hard way.
+@azee805 We don't have a how-to video for the passenger side right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
Sir I got a 2013 ram 1500 is 4.7 l in it I want to know how it comes with orange antifreeze in it I want put green press tone and it would that hurt that motor or that radiator or the heater core please let me know appreciate it thank you let me know have a good day
I had a shop tell me they wanted to replace both my cv axels after I had brought my car to them for a completely different issue. They wanted to charge me $1300 for the job. I declined, and I'm glad I did. From what I'm seeing here, they were charging way too many hours.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
1A Auto: Repair Tips & Secrets Only Mechanics Know, This made me laugh so hard, thanks for sharing!
CV Axle cameout like butter... good editing.
Keep in-mind, many CV Axle manufactures do NOT advise using anti-seize on the splines. I understand the concept, but there is a reason they do no want this added to such tight tolerances.
The best channel in the world for teaching how you can do it by yourself
Made it look so easy. Thank you.
I’m amazed on how easy you were able to remove the cv axle from the transmission…how?!?
I have done this on a Rav 4 with the same transmission. It is not this easy. It’s hard to get a pry bar in there because it’s recessed in the transmission. Even if you can, it’s likely the snap ring is going to resist you. I used a slide hammer and after turning the wheel a 1/4 turn on the other side each time I pulled on it, finally it came out. If you are doing this job, I would definitely replace the axle seal which sits flush on the transmission as there is a good chance it will be damaged when you pull the old axle out. Also USE OEM axle and seal. The first time I tried AutoZone and it lasted 500 miles and sounded like clanking noises on turns. All that aftermarket stuff is made in China and it’s not worth the risk as I found out the hard way.
Can this be done the same process on the right side?
+@azee805 We don't have a how-to video for the passenger side right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
Is it the same for 2015 Scion tc?
I just have one question: where do you find that sensor?
Got this done thankyou very much
Can you add a list of the items to order for a 2013 camry se or a site that sells cheaper genuine parts. 😊
+@miguelc9358 Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
I have 2017 se camry cv axel broke which brand you recommend for me from out market ?
Sir I got a 2013 ram 1500 is 4.7 l in it I want to know how it comes with orange antifreeze in it I want put green press tone and it would that hurt that motor or that radiator or the heater core please let me know appreciate it thank you let me know have a good day
I had a shop tell me they wanted to replace both my cv axels after I had brought my car to them for a completely different issue. They wanted to charge me $1300 for the job. I declined, and I'm glad I did. From what I'm seeing here, they were charging way too many hours.
Good job
Very Nice💥🛠
🏎️🔥🔥🔥good learnings
⁰ㅔ 좋은데