I dont like caulking windows doors messy job but i when i do i generally line tape top n bottom completely inside window frame smooth out then remove tape slowly then smooth out again less caulking left looks good..
If you don't like his tutorial, just let him be. Leave him alone! And he didn't say he was a professional either. At least he's trying! Thanks for a good video! 👍
You might never see this but if you do, thank you. This was straightforward and informative. I am the least handy person alive but I'm gonna caulk tomorrow when rain is not scheduled.
I say on the next one try to just take the tip off the tube it will lay a 1/16- 1/8” bead much easier to dress the bead and a lot less clean up just my 2cents man practice makes perfect keep grinding
Thanks man! Figured it'd be pretty straightforward, but thought I'd look up a video to be sure. Got a trail of ants coming into the house through a crack near the window.
Kirk Degler wow. Have you sealed it up yet. If you still see the ants might have to get and exterminator. Thanks for watching and don’t forget to subscribe. Thanks again.
@@adubbproductions Hey not to undermine your knowledge :D but I bet there are other ways to get rid of insects especially ants :]. I know some things like "home remedies" may not work or seem to not, or be labeled as not as strong first try, but hey there are plenty that work I bet. Anyway, have a good one years later, yall haha
Use razor to remove old sealant first, apply a consistent bead and spray wet sealant with soapy water solution and use a sealant tool to remove excess and then finally spray a mist onto finished sealant. There’s a right way and a wrong way. The way you have done it is definitely not the right way 😬
I’m doing this soon when you say to spray a fine mist onto finished sealant is that the same soapy solution or are you using just distilled water? Help!
Regirl75 spray some soapy water on the sealant when finished. There quite a lot of steps for this job but I think people underestimate how much you need to learn when in the renovation/decorating business. It’s doable with practice
@@Puda depends on what sealant shaping tool you use but since I posted this comment I’ve got new shapers and no longer use soapy water but Normally the soapy water is used to make the tool glide and smooth the bead out but if you use something like the Cramer 40407EN Silicone Profiling Kit it’s unnecessary to use water but have a lot of blue paper towel ready for cleaning said tools
Great video! Thanks for the tip. I got my first gas bill for the winter and boy was it high 😩 I’m going to caulk my windows today and put plastic over them. Hopefully this will help. Thanks again!
I’m sure it will it helped me. Thanks for watching. Don’t forget to subscribe. Come back and let me know if you notice a difference. Please. Thanks in advance.
We arent naysayers, just people that know that all of that is totally wrong. I mean, for cryin out loud if he had read the package instructions, it tells you to push the caulk forward, not drag it backwards. WET paper towel or rag, NEVER dry. It will stick to the dry towel and smear the caulk. And it says that on the instructions as well!!
Oh no need to use scissors or knife to cut the tip. That's what that little hole on the side of caulk gun by the trigger is for. If you look, when you squeeze the trigger, a blade pops up and snips off the tip.
Wampuskat Love have you ever actually had the cutter work all it does is squeeze the tip off it will never give you a clean cut therefore never a clean bead
@@mbank3832 also you want to use as little caulk as possible while still being sufficient AND minimize any caulkingoutside the main angle area because caulking collect dust and dirt over time and looks un appealing. To avoid this in any case possible caulking should be painted over.🎨👨🎨 PRO TIP: when you cut your caulk tube tip, make the hole barely larger than the majority of your cracks are. Most people don't even know thats a factor hence so much over pressing and mess going everywhere you don't need it. Less is more you can do a second pass if needed to keep a crisp clean overall look. PRO TIP #2: always have a sopping wed rag to maintain a very wet wiping finger. When your finger is try it pulls the caulking away instead of just. smoothing the surface. For questions feel free to email me @ houseofcolorspainting@gmail.com
Great informative video! I’m getting water inside my window on the wood....can you tell me where to caulk to prevent this? I’m currently using pig waterproof seals....doesn’t stop the water. Any help you can give is greatly appreciated. Thanks, Annemarie Conrod.
What temperature do you recommend caulking them. My windows are wood and old. I can't afford to replace them right now. I see a lot of condensation on the glass. There is a big gap between the window itself and the frame. House is older. Settling. I always put those insulation strips in places like that then cover it with plastic in the winter time.
TheKaptan A You probably know better than me cause I’m not a professional. That sounds like a good suggestion. But if you look at the date of the video I did this in 2016. Its been over a year and the cracks still aren’t back. Thank you for watching and don’t forget to subscribe. Thanks for your input it’s much appreciated.
Why didn't you clean out the old caulking first? And why so sloppy during the application of the bead? Caulking is definitely something we all can attempt, but at least do it properly for your tutorial!
J G J G People like you are so fixated on everything done incorrectly and mis the bottom line of me trying save others some money by doing a simple fix. Since you are such a professional why don’t you make a video displaying the proper way to do it instead of pointing out all the imperfections in the video. Bottom line is over 10k people watched this video and hopefully at least half of them got some value out of it unlike the waste of an upload on your channel. If you have no positive input then kindly skip the video and peace yourself out. Peace out mister caulk aficionado. ✌🏾
@@adubbproductions buddy I laughed so hard watching you do this...What a complete nightmare...you didnt even prep the window by removing the old caulk WTF. And the amount of wasted caulk was incredible...please dont post anymore
I’ve posted plenty since this video. Over 1000 videos on my channel. This obviously not for people like yourselves. If you wanted to give and show people your expertise you would but you don’t. If you can direct everyone to your direct contribution showing the proper way to do it them by all means. If not then you are not helping. Either way thanks for watching. I’m here for solutions not complaints. Ijs. Help or keep it moving.
@@johna6838 I was thinking the same exact thing! So much caulk! But this was in 2016 people weren’t making very many videos back then. I bet he’s gotten better And more comfortable.
No. Do not caulk drywall corners. You definitely wanna stick to using joint compound for drywall. Some things are forgiving. The corners in your house is not one of them. Use joint compound. I recommend getting a professional for that if you wannna save some money ask around and see if any of your friends knows anyone that does it for a living and maybe they can do it for you on the cheep. Thanks for watching.
Who said it was my first time? I didn’t. It’s not perfect but it works. This is obviously not for professionals so i don’t know why so many experts are watching and commenting on the video. I suppose you have a video that shows the correct way to do it? Or are you just here to talk crap and offer no solution?
Dude you need to learn how to run a bead! You cut your tube too short/wide thus making a unnecessarily fat bead and got caulk all over! You also need to wipe it all with a wet rag so it cleans it up and leaves you a perfect seal...
David Pike Well I did say in the video that i wasn’t a professional. I’m just trying to share some information to help save some people some money. Despite the fact that it wasn’t perfect it still worked. Do you have a video demonstrating how to run a bead??
make sure to apply tape above and below your opening before caulking so mess will be reduced while getting clean lines after ripping the tape off. great vid (:
Im not sure what school you went to but they done taught you wrong.. First you should have scraped that old garbage out. Then wiped the dirt off. Then you should cut the tip to the size of bead you want. Then while running the caulking gun yiu shouldn't pull the gun at a 45 degree angle and just pump random amounts then have to wipe most of it off. Keep the gun at a 90 degree angle and go smooth and steady letting the tip create the bead. Should be barely any clean up needed.
@MathCuriousity what should you do or what can you do. You could use that if you want depending what you want it to look like. The better thing to do would be to cut out all the bad tape and re tape it. If your not familiar with drywall taping, it could turn out bad. UA-cam Vancouver carpenter he has some good taping videos
@MathCuriousity haha you can do whatever you want . Not sure that particular method would work out very good. Better off to cut the damaged area out with a olfa / razor and re-tape it.
@@lring1559 thanks for reply - I have another question: what about random tiny hair thin cracks in my ceiling? Can I caulk those? Or should I do compound?
@@adubbproductions Honestly, you should consider changing the title to the "fastest way to apply caulk". Because that's what you did. And I'm sure people would appreciate that better.
Why comment with negativity. Says a lot About you. I don’t know why I would expect and different. It is who you are. Evil and hate is in your blood. Smh. God bless you Shaitan. Thank you for watching. 👍🏾
Dude i really need to seal my windows tomorrow or I won’t be able to sleep! Baby lizards always find a way to get in and now my bed is next to the window and i wont be able to sleep knowing its now summer and a lizard will crawling on me while im sleeping 🤢😭💀
First time viewer and your tutorial was okay you should've cleaned the window seal first with bleach then remove old caulk with blow dryer to help lifted up the old caulk then proceeded to add new caulk and removed extra caulk with a wet rag not paper towels or with a caulk tool. Be neater if you're doing videos tutorials.
Lol. This just goes to show that if you wanna do something in life, no matter how good or bad you are at it, YOU CAN DO IT! All you need is a camera and some wifi!
It also goes to show you that no matter how irrelevant you are in real life all you need is internet connection and a phone and you can attempt to be relevant in the comments of people’s videos you deep down aspire to be. Lol. Don’t forget to subscribe for more videos you can comment on. I have over 600 of them. Have a ball. Maybe you can find a life. ✌🏾
Worked fine for me and it keeps the air out and saves money in my electric bill. Do you have a video you made offering help to people displaying better solution or are you just here to complain and offer no solution or examples?
@@adubbproductions You know it's wrong and you know it won't last a year. The video incorporates everything the experts tell you what not to do. Just put your hands up and take the criticism.
My comment section is on. What i do know is it did last longer than a year. It’s still fine to this day. I still own that house and you clearly didn’t look at how many years ago I made that video. People like me try to offer a solution to others that might not have the means to afford professional services people like you just complain and talk trash while offering no assistance to the people. If you don’t have a solution, don’t have a video to help, don’t care about assisting others then be gone. You are dismissed. Thank you for commenting, don’t forget to like and subscribe for more helpful videos? ✌🏾
No. You watch how to apply silicone the complete whatever. Like i said if YOU can’t offer a solution that YOU created to help people. Then YOU should exit stage left. Troll.
uh,,um,,the things,,LoL,, he didnt explain the difference in the caulking brands, or the difference caulking guns oe how much pressure to apply he didn't even clean out the crack and sand it.....hahahaha.. horrible, horrible
@@adubbproductions you can apply caulk the way you did but the problem is that caulk your using sucks its really messy next time use solar seal bro easy to work with
Well why aren’t you doing just that. K Lowe. At the time when I made this video I was doing the best I could as a new home owner trying to offer solutions to people like myself who at the time might not have had the means to make minor repairs. Do you have any videos trying to help others or are you just hear to join the band wagon of others bashing my attempts to help without offering solutions? It’s so easy for everyone to be negative and not offer any solutions. A lot of people are just negative individuals. It’s really sad. Furthermore it’s always people that just watch and don’t have any solutions. You could do better blind folded. Show me.
@@adubbproductions Because it's laughable. I seriously thought this was meant to be a joke. I thought I was going to see a step by step on how to apply caulk. But this is satire.
Well that’s your opinion. I’m sure some people found it useful. If you didn’t you can move on to the next video or maybe create your own resource to help people that aren’t experts.
@@adubbproductions Oh, I am moving on. But, there's no reason for you to waste people's time just for clickbait. You clearly don't know how to apply caulk to the window. How about you watch videos on how to apply caulk? So you can learn from this horrible mistake. SATIRE.
WGM 247 If you are a professional why would you be looking at my video. Clearly your an amateur also. Lol hater. Thanks for watching. Don’t forget to subscribe.
I dont like caulking windows doors messy job but i when i do i generally line tape top n bottom completely inside window frame smooth out then remove tape slowly then smooth out again less caulking left looks good..
Clean off the old caulk first.
If you don't like his tutorial, just let him be. Leave him alone! And he didn't say he was a professional either. At least he's trying! Thanks for a good video! 👍
You might never see this but if you do, thank you. This was straightforward and informative. I am the least handy person alive but I'm gonna caulk tomorrow when rain is not scheduled.
I say on the next one try to just take the tip off the tube it will lay a 1/16- 1/8” bead much easier to dress the bead and a lot less clean up just my 2cents man practice makes perfect keep grinding
Thanks for the video. Posts of negative criticism but it really helped me. I hope you do more of these 😊🙌🏾
Thank you for saying how to use cork gun I've always been intimated of using one
🤣
Thanks man! Figured it'd be pretty straightforward, but thought I'd look up a video to be sure. Got a trail of ants coming into the house through a crack near the window.
Kirk Degler wow. Have you sealed it up yet. If you still see the ants might have to get and exterminator. Thanks for watching and don’t forget to subscribe. Thanks again.
@@adubbproductions Hey not to undermine your knowledge :D but I bet there are other ways to get rid of insects especially ants :]. I know some things like "home remedies" may not work or seem to not, or be labeled as not as strong first try, but hey there are plenty that work I bet. Anyway, have a good one years later, yall haha
Use razor to remove old sealant first, apply a consistent bead and spray wet sealant with soapy water solution and use a sealant tool to remove excess and then finally spray a mist onto finished sealant. There’s a right way and a wrong way. The way you have done it is definitely not the right way 😬
I’m doing this soon when you say to spray a fine mist onto finished sealant is that the same soapy solution or are you using just distilled water? Help!
Regirl75 spray some soapy water on the sealant when finished. There quite a lot of steps for this job but I think people underestimate how much you need to learn when in the renovation/decorating business. It’s doable with practice
Thanks. Finally some insight. They are killing me in this old video. I made this years ago.
@@blue-sj4lk can you explain why that part is important? Never saw anyone doing it tbh.
@@Puda depends on what sealant shaping tool you use but since I posted this comment I’ve got new shapers and no longer use soapy water but Normally the soapy water is used to make the tool glide and smooth the bead out but if you use something like the Cramer 40407EN Silicone Profiling Kit it’s unnecessary to use water but have a lot of blue paper towel ready for cleaning said tools
Great video! Thanks for the tip. I got my first gas bill for the winter and boy was it high 😩 I’m going to caulk my windows today and put plastic over them. Hopefully this will help. Thanks again!
I’m sure it will it helped me. Thanks for watching. Don’t forget to subscribe. Come back and let me know if you notice a difference. Please. Thanks in advance.
I appreciate the video as a diy'er. Don't listen to the nay sayers. It will help someone. Keep posting 👍🏾
We arent naysayers, just people that know that all of that is totally wrong. I mean, for cryin out loud if he had read the package instructions, it tells you to push the caulk forward, not drag it backwards. WET paper towel or rag, NEVER dry. It will stick to the dry towel and smear the caulk. And it says that on the instructions as well!!
Oh no need to use scissors or knife to cut the tip. That's what that little hole on the side of caulk gun by the trigger is for. If you look, when you squeeze the trigger, a blade pops up and snips off the tip.
Wampuskat Love have you ever actually had the cutter work all it does is squeeze the tip off it will never give you a clean cut therefore never a clean bead
Liking just to help you out but holy shit that is *not* how you do that bro.
besides not removing the old caulk, what did he do wrong ?
@@mbank3832 You aren't supposed to let it flair up like that as you smooth it. The smoothing process should result in a completely seamless 'joint'
@@awesometylerable thx, good point
@@mbank3832 also you want to use as little caulk as possible while still being sufficient AND minimize any caulkingoutside the main angle area because caulking collect dust and dirt over time and looks un appealing. To avoid this in any case possible caulking should be painted over.🎨👨🎨 PRO TIP: when you cut your caulk tube tip, make the hole barely larger than the majority of your cracks are. Most people don't even know thats a factor hence so much over pressing and mess going everywhere you don't need it. Less is more you can do a second pass if needed to keep a crisp clean overall look. PRO TIP #2: always have a sopping wed rag to maintain a very wet wiping finger. When your finger is try it pulls the caulking away instead of just. smoothing the surface. For questions feel free to email me @ houseofcolorspainting@gmail.com
Great informative video! I’m getting water inside my window on the wood....can you tell me where to caulk to prevent this? I’m currently using pig waterproof seals....doesn’t stop the water. Any help you can give is greatly appreciated.
Thanks, Annemarie Conrod.
Explained like a patient father.
I caulked it without using my finger to make smooth. The caulking tip made a smooth already. 👍
Samsung/Android Is the best /Fortnite sucks You have skills. I always squeeze out to much. Haven’t mastered it yet. Thank you for watching.
@@adubbproductions I'm 13 btw, my caulking job is better than my father's.
Samsung/Android Is the best /Fortnite sucks That’s awesome buddy. Keep up the good work.
Good video only thing is when you want to stop push in the back tab and pull the lever out to it won’t make an extra mess.
What temperature do you recommend caulking them. My windows are wood and old. I can't afford to replace them right now. I see a lot of condensation on the glass. There is a big gap between the window itself and the frame. House is older. Settling. I always put those insulation strips in places like that then cover it with plastic in the winter time.
You should really scrape off that old caulking because those cracks are going to be back next year.
TheKaptan A You probably know better than me cause I’m not a professional. That sounds like a good suggestion. But if you look at the date of the video I did this in 2016. Its been over a year and the cracks still aren’t back. Thank you for watching and don’t forget to subscribe. Thanks for your input it’s much appreciated.
I've done it like that before and it hasn't lasted too long. But nice I'm glad to see it's holding up.
TheKaptan A thanks. You suggestion makes the most sense though. It’s never good to keep piling that stuff up on top of itself.
kaptan killem because you bought cheap caulk. I do it. Let it dry, 24 hours later one more coat boom done
Thank you dude. Helpful. I’m about to do all my windows, I did buy a smoothing tool though.
Appreciate you!! Now ima go home pretend to my wife that I no what I’m doing hahaha
Lol
It does look better too as you get dirt at the bottom of the windows.
Why didn't you clean out the old caulking first? And why so sloppy during the application of the bead? Caulking is definitely something we all can attempt, but at least do it properly for your tutorial!
J G J G
People like you are so fixated on everything done incorrectly and mis the bottom line of me trying save others some money by doing a simple fix. Since you are such a professional why don’t you make a video displaying the proper way to do it instead of pointing out all the imperfections in the video.
Bottom line is over 10k people watched this video and hopefully at least half of them got some value out of it unlike the waste of an upload on your channel. If you have no positive input then kindly skip the video and peace yourself out. Peace out mister caulk aficionado. ✌🏾
@@adubbproductions buddy I laughed so hard watching you do this...What a complete nightmare...you didnt even prep the window by removing the old caulk WTF. And the amount of wasted caulk was incredible...please dont post anymore
I’ve posted plenty since this video. Over 1000 videos on my channel. This obviously not for people like yourselves. If you wanted to give and show people your expertise you would but you don’t. If you can direct everyone to your direct contribution showing the proper way to do it them by all means. If not then you are not helping. Either way thanks for watching. I’m here for solutions not complaints. Ijs. Help or keep it moving.
This is some of the worst caulking I’ve ever seen 😂🤣
@@johna6838 I was thinking the same exact thing! So much caulk! But this was in 2016 people weren’t making very many videos back then. I bet he’s gotten better And more comfortable.
thanks bro. really appreciated
🙏🏾
Very nice video, and nicely presented
Thank you.
Nice, tight....thing. Awesome description, bro!
Bizzy D 😂😂😂😂😂😂😂 stop it. Lol thanks for watching. I appreciate it. Don’t forget to subscribe.
Nasty lol
Thanks so much!!! Definitely helped me! 🙏😃👍🏻🤟🏻
Ty so much !
Damn, hope no one pays you to do this. That was completely the wrong way. You need to watch a UA-cam video on how to caulk properly.
Thank you...
thanks so much. you saved me money.
Great video. Easy to follow. Thank you
can i caulk drywall corners just to make it look smooth and sealed or is there another way to do that?
No. Do not caulk drywall corners. You definitely wanna stick to using joint compound for drywall. Some things are forgiving. The corners in your house is not one of them. Use joint compound. I recommend getting a professional for that if you wannna save some money ask around and see if any of your friends knows anyone that does it for a living and maybe they can do it for you on the cheep. Thanks for watching.
@@adubbproductions Thank you, man.
I have peeling tape in corners of my bathroom where walls meet ceiling. What’s wrong with caulk?!
Great instructions! Thanks so much!!!! 🤓👍
No problem. Thanks for watching.
What a monster! First time doing and already teaching others
Who said it was my first time? I didn’t. It’s not perfect but it works. This is obviously not for professionals so i don’t know why so many experts are watching and commenting on the video. I suppose you have a video that shows the correct way to do it? Or are you just here to talk crap and offer no solution?
Get a no drip caulk gun. It'll cost a little bit more but it won't squeeze the caulk out and make a mess.
The caulk gun has a cutter by the handle
Why didn't you remove the old caulking first?
I presume this is a video on how NOT to do it
Why presume that when the title clearly says otherwise? Careful guys, we got a smart ass here.
@@arcticmonkey4326 where's the prep tape? Sloppy job.
Thanks brother!
Dude you need to learn how to run a bead! You cut your tube too short/wide thus making a unnecessarily fat bead and got caulk all over! You also need to wipe it all with a wet rag so it cleans it up and leaves you a perfect seal...
David Pike Well I did say in the video that i wasn’t a professional. I’m just trying to share some information to help save some people some money. Despite the fact that it wasn’t perfect it still worked. Do you have a video demonstrating how to run a bead??
A-Dubb Productions Allan Wade LOL, great comment!
It’s a good video, that’s how we learn from one another!
Thanks for the video
thanks for a great video
David Lees Your welcome. Thanks you for watching. Don’t forget to subscribe.
make sure to apply tape above and below your opening before caulking so mess will be reduced while getting clean lines after ripping the tape off. great vid (:
total waste of time and money and materials completely unnecessary
It's excess... not access.
Thank You, need to do my windows!
nina wade you want that mess?
Caulk or silicone seal?
A good trick is to spray soapy water on it
🤣🤣 king of caulking here
Can you do it without the gun or is it essential?
Lillie's Corner you can get it in a tube that dosent require a gun
Im not sure what school you went to but they done taught you wrong.. First you should have scraped that old garbage out. Then wiped the dirt off. Then you should cut the tip to the size of bead you want. Then while running the caulking gun yiu shouldn't pull the gun at a 45 degree angle and just pump random amounts then have to wipe most of it off. Keep the gun at a 90 degree angle and go smooth and steady letting the tip create the bead. Should be barely any clean up needed.
Hey I have peeling tape where my ceiling meets wall in bathroom - can I use caulk? How do I DIY?
@MathCuriousity what should you do or what can you do. You could use that if you want depending what you want it to look like.
The better thing to do would be to cut out all the bad tape and re tape it. If your not familiar with drywall taping, it could turn out bad. UA-cam Vancouver carpenter he has some good taping videos
@@lring1559 what are some quick tips u can give me for drywall taping ? Can I slap compound under the old tape and squish it flush?
@MathCuriousity haha you can do whatever you want . Not sure that particular method would work out very good. Better off to cut the damaged area out with a olfa / razor and re-tape it.
@@lring1559 thanks for reply - I have another question: what about random tiny hair thin cracks in my ceiling? Can I caulk those? Or should I do compound?
I needed this laugh!
Jessca I’m glad you got it. Thank you for watching. Thank you for your comments and whatever else this was, have a good day sista. 👍🏾✊🏾✌🏾
@@adubbproductions Honestly, you should consider changing the title to the "fastest way to apply caulk". Because that's what you did. And I'm sure people would appreciate that better.
Oh. Now your offering advice. Ok. Well thank you. Have a good day. Happy Juneteenth Sista.
@@adubbproductions Wow, you still sound bitter. Take it as criticism.
LOL. Is this your first time???
I’m not a professional just trying to save some money. Open to advice.
A-Dubb Productions Allan Wade thanks for the help man
A-Dubb Productions Allan Wade thank you
Dude you slopped it everywhere
Gatta save that money
Great video of how to do a crap job 👍🏻
Why comment with negativity. Says a lot About you. I don’t know why I would expect and different. It is who you are. Evil and hate is in your blood. Smh. God bless you Shaitan. Thank you for watching. 👍🏾
@@adubbproductions 😈
Dude i really need to seal my windows tomorrow or I won’t be able to sleep! Baby lizards always find a way to get in and now my bed is next to the window and i wont be able to sleep knowing its now summer and a lizard will crawling on me while im sleeping 🤢😭💀
Gotta scrape l the old shit of that window first. Has to be cleared and clean before.
I Laugh at every time someone say “Claulk” Coz it sounded Like C*ck 😂
Don’t use your finger your going to get a nail infection
First time viewer and your tutorial was okay you should've cleaned the window seal first with bleach then remove old caulk with blow dryer to help lifted up the old caulk then proceeded to add new caulk and removed extra caulk with a wet rag not paper towels or with a caulk tool. Be neater if you're doing videos tutorials.
What does the blow dryer do? We want to heat up the caulk?!
Can you do the outside of the windows too?
What not going to remove the old crack shrinking caulk? Wow that's not going to look very good. Be lucky if it actually seals up the window. ..
Wait is this a legit video?
And um....the word ur looking for is EXCESS......not ACCESS. I'm no hater. Just returning the kindness and a little basic tools.
My brother....... Way too much caulk used. Way too much on frame......a smaller bead and a lighter touch. Sloppy. Lol l
Caulk caulk caulk
Make one pass. That's it.
yeeehaaaa 🤠
OMG!
You would not last few hours on the job,this is the worst I have sen so far!!!
Basically everything he has just done is wrong! 😆😂
Lol. This just goes to show that if you wanna do something in life, no matter how good or bad you are at it, YOU CAN DO IT! All you need is a camera and some wifi!
It also goes to show you that no matter how irrelevant you are in real life all you need is internet connection and a phone and you can attempt to be relevant in the comments of people’s videos you deep down aspire to be. Lol. Don’t forget to subscribe for more videos you can comment on. I have over 600 of them. Have a ball. Maybe you can find a life. ✌🏾
🤣
This is a HUGEEEE NO
Lmfao
Terrible
My egg
too sloppy
What about cutting out old caulk holy Lee chit
What a mess. This is NOT the way to seal a window!
Worked fine for me and it keeps the air out and saves money in my electric bill. Do you have a video you made offering help to people displaying better solution or are you just here to complain and offer no solution or examples?
@@adubbproductions You know it's wrong and you know it won't last a year. The video incorporates everything the experts tell you what not to do. Just put your hands up and take the criticism.
@@adubbproductions Watch 'How to apply silicone - The complete pro guide'
My comment section is on. What i do know is it did last longer than a year. It’s still fine to this day. I still own that house and you clearly didn’t look at how many years ago I made that video. People like me try to offer a solution to others that might not have the means to afford professional services people like you just complain and talk trash while offering no assistance to the people. If you don’t have a solution, don’t have a video to help, don’t care about assisting others then be gone. You are dismissed. Thank you for commenting, don’t forget to like and subscribe for more helpful videos? ✌🏾
No. You watch how to apply silicone the complete whatever. Like i said if YOU can’t offer a solution that YOU created to help people. Then YOU should exit stage left. Troll.
uh,,um,,the things,,LoL,, he didnt explain the difference in the caulking brands, or the difference caulking guns oe how much pressure to apply he didn't even clean out the crack and sand it.....hahahaha.. horrible, horrible
Do not apply caulk how he did lol you cut an angle and push the caulk when it comes out of the tube away from you
Because you have a video that shows everyone a better way right?? Or your just here to tell everyone what not to do and offer no solution????
@@adubbproductions you can apply caulk the way you did but the problem is that caulk your using sucks its really messy next time use solar seal bro easy to work with
Ok. Understood. So solar seal is better. I’ll try that next time. Thanks for your suggestion.
@@adubbproductions ya no prob have a good one!
Ok my friend, here’s another. The most untidy, unhelpful and amateur video you will ever see in relation to using sealant round windows
Pls god watch a different video I could do what he did blind folded and it would still look better than that
Well why aren’t you doing just that. K Lowe. At the time when I made this video I was doing the best I could as a new home owner trying to offer solutions to people like myself who at the time might not have had the means to make minor repairs. Do you have any videos trying to help others or are you just hear to join the band wagon of others bashing my attempts to help without offering solutions? It’s so easy for everyone to be negative and not offer any solutions. A lot of people are just negative individuals. It’s really sad. Furthermore it’s always people that just watch and don’t have any solutions. You could do better blind folded. Show me.
@@adubbproductions lol challenge accepted I literally do this for a living bud
@@klowe81 Still talking? I’m waiting here for a video link. You doing better blind folded. I’m here.
@@adubbproductions hold tight little fella
@@adubbproductions ua-cam.com/users/shortswzyx3biQjok?feature=share
That is a total mess
Is this a joke? I'm serious.
No it wasn’t. Why?
@@adubbproductions Because it's laughable. I seriously thought this was meant to be a joke. I thought I was going to see a step by step on how to apply caulk. But this is satire.
Well that’s your opinion. I’m sure some people found it useful. If you didn’t you can move on to the next video or maybe create your own resource to help people that aren’t experts.
@@adubbproductions Oh, I am moving on. But, there's no reason for you to waste people's time just for clickbait. You clearly don't know how to apply caulk to the window. How about you watch videos on how to apply caulk? So you can learn from this horrible mistake. SATIRE.
Jessca How about you stop being a hater and be a little constructive and not attempt to be destructive.
You shouldn’t be making how to videos
chassiferd good thing your opinion doesn’t matter.
Amateur
WGM 247 If you are a professional why would you be looking at my video. Clearly your an amateur also. Lol hater. Thanks for watching. Don’t forget to subscribe.
Terrible