My newest hovercraft - 2020 Hoverstream (BHC) Marlin
Вставка
- Опубліковано 26 бер 2022
- Recently bought this craft, and it was filthy and the engine was suspected to be blown. All the engine needed on my end was a good carb clean as it was caked with mud/dirt/clay. I cleaned the carb up, cleaned the craft up, put it all back together, installed new skirts and took it out for my first hover with it. Just under 49 hours on the craft.
- Спорт
Jake, I have the same hovercraft. E give seized. How did you get the motor out of the craft. I'm going bonkers trying to figure it out.
Scott
Remove all guards/covers, unbolt fan, undo the electrical going to engine, undo throttle cable to engine, remove the 4 nuts holding the engine down, hoist the engine and drive assembly out.
From what I have seen, you can really access the bolts holding the belt drive mount on the engine when its installed in the craft, so I leave it on, but you have to unbolt the fan so it stays in the duct when you pull the engine, otherwise the fan will interfere with the duct not allowing you to remove.
How does the speed pickup work?
Travel speed? It's a GPS speedometer, so works like a speedometer on your phone would.
@@jwish29
Good afternoon!
Happy New Year!
Are you engaged in the selection and sale of similar boats and, if so, can you find me a boat that is not new, but in excellent condition?
If you are not engaged in these services, can you recommend a company that will provide this service?
Sincerely, Mikhail. Moscow.
@Михаил Гагарин feel free to reach out to British Hover Company, they sell new but they also sell used from time to time and have a decent view of individuals that are trying to sell.
@@jwish29
Thank you for your reply!
Sincerely, Mikhail.