Thanks, PG. The information about rebuilding the curves as well as the use of the control points for forming the shape and also the use of offsetting the curve instead of the surface are all such good basic things to know and use.
Thank you very much PJ for your tutorials, they are the best to learn how to model jewelry with Rhino that I found on youtube. One query: joining and reconstructing the curve so that later on, it will not be great for problems, but whenever you rebuild, it gives you many more control points (something that we supposedly should avoid in Rhino) and the second thing I observe is that Reconstructed curve is no longer as perfect as the original. Thanks, teacher!
Thank you for your thoughtful approach to teaching rhino. We learn from your mistakes and you process. Excellent reminder to REBUILD, and this very good use of loft.
Your tutorials are among the best I have seen, thank you. One question for you, at 10:20, what is your preferred method to set the gumball to the absolute center of the shape? Odd-numbered star shapes always suffer from non-centered pivot points as the center of the bounding box for the selected items is not the same as the center of the star-like shape. Curious about what your approach would be.
It depends on what you like to center with. the area, volume, distant? it can be all set up in rhino. for example. if you like to center by distant. you can always draw a curve and snap in the middle.
PJ, are you ok? I hope you're well. What can I say about your tutorials? Show, perfect, sensational. My sincere thanks. Thank you, always. Success for you.
Thank you PJ! I have a doubt , when I switched on the points it only appeared on the top and bottom of the loft , mine didn’t have any in the center.. is there a reason why ?
Большое спасибо за то, что так щедро делитесь знаниями! Всего Вам доброго!
You are very welcome. Hope you enjoy rest of my videos as well.
I'm an architect and I learnt a lot from your tutorials. Thank you so much!
Gold they help!
Thanks for tip on rebuilding as well as offset the curve instead of the surface! Great advice
I was happy when I figure out that too.
Great example of how the REBUILD works!
😀
Glad you liked it!
The greatest Rhino teaching channel I have ever seen!
thank you !
Thanks, PG. The information about rebuilding the curves as well as the use of the control points for forming the shape and also the use of offsetting the curve instead of the surface are all such good basic things to know and use.
You are welcome, Ron! Haven't see your comments for a while. welcome back!
awesome tutorial! thank you so much
You're very welcome!
Hi Pj Chen,
I just wanted to say, You are THE BEST OF THE BEST! The way you explain commands and problems is all-inclusive.
Thank you!
That is super. I am glad you like my video. Check out others, you may find a lot of useful information.
i loved your tutorial works. it's really explanatory. and ive learned many tricks thanks to you ! thanks a lot !
Glad to hear that!
You are so good teacher. Thank you. 👌🌞
You are so welcome!
Simple, straight to the point and what I needed, thanks a bunch
super!
You are amazing ! such clear explanations ! your channel deserves way more views !!!
Thank you Rainer! Glad you like it. please share my channel!
This one is so amazing! Just solved some problems bothered me so long! Thank you so much!
You are very welcome!!
這些指令說明得很清楚 相當實用 謝謝你
CJ Chien 不客氣喔！
Thank you very much PJ for your tutorials, they are the best to learn how to model jewelry with Rhino that I found on youtube.
One query: joining and reconstructing the curve so that later on, it will not be great for problems, but whenever you rebuild, it gives you many more control points (something that we supposedly should avoid in Rhino) and the second thing I observe is that Reconstructed curve is no longer as perfect as the original.
Thanks, teacher!
that is true.
Thank You PJ. I always enjoy watching and learning new techniques in Rhino!!!
You are welcome, Tim.
Thank you so much for all your rhino videos PJ! Really really grateful!!
My pleasure!
At time 2:26 it looks like a smiley face and that made me smile.
🤣
Genius!! I now know I have been not rebuilding degrees to match. Thankyou so much!
Happy to help!
wonderful tricks. well explained!
Glad you liked it!
A lot of great and important tips in this video. Definitely a GEM !
Super! Glad you like it!
Thank you, PJ, I really like the way you teach, it is very thorough.
You're very welcome!
it helps me a lot to understand. thank you
Happy to hear that.
Thank you PJ! I have a lot to learn with making organic models so this helps a lot :)
That is great. You are welcome, Nicolle.
Thanks a lot. Very useful and interesting.
You are welcome!
Thanks PJ
Thank you for watching
Thank you for your thoughtful approach to teaching rhino. We learn from your mistakes and you process. Excellent reminder to REBUILD, and this very good use of loft.
You are so welcome
you the best pj
Thank you!
gracias
You are a rhino wizard!!! Thank you for these wonderful videos PJ!!
You are welcome!
Awesome video! I always learn at least one trick from everyone of your videos.
Glad to hear it!
Thanks for sharing.
Thanks for watching!
O my god you are a great teacher😭😭😭thanks a lot
You are very welcome. Please tell all your friends about my channel!
thx PJ ...it was very useful.
Glad to hear that!
Thank you a lot!!
You're welcome!
Good lesson
Thanks! 😃
Thank you! Your videos have been very helpful and you are a great teacher too.
Glad you enjoy it. check out more videos at membership!!
My all work in gold jewellery deisgn Sir.....
Great video. I liked the tips on rebuilding and offseting curves instead of surfaces. I undestand why I had issues on some of my objects.
that is great!
Nice as always
Thanks!
o sea Chen te amo!!!
Happy to know you like my video!
thank you so much!!!
You're welcome!
Thank you
Glad you like it
Thanks for the tutorial. You explain the reasons how and why commands work and that is very helpful
You are welcome. I am happy to know you find the video useful!
tank you PJ
You are welcome!
thank you
You're welcome
great tutorial Thanks
You are welcome, Michael!
the bottom is funky!!
When you have blend the surface and if the original surface you blend from has bump. then you will have bump. you can always use cap. or flat bottom.
Thanks a lot!!!
You're welcome!
Thank you so much for sharing! An interesting and creative way to create organic the shape using basic Rhino commands. :)
Glad you liked it!
THANX A LOT!! your tutorials are amazing!
You're very welcome!
Very clear and direct. Thank you.
You are welcome!
Thank you！
Welcome!
Thank you PJ. I am grooving with you
Rock on!
Thank you.
J;apprends toujours avec vous.
Merci PJ
that is awesome!
Very helpful Video sir
Glad it helps!
Awesome tips PJ...!!! Thanks...
You are welcome Isaac!!
So good
Thank you
great way to modellize this shape...thanks
You are welcome, Emrah!
PJ - Excellent tutorial. I always learn something new from your tutorials
Happy to hear that Roger!
Excellent video PJ. Thank you for your time and expertise.
You are very welcome, Karen.
Thanks for the tutorial! Always super interesting and clear!
Glad you think so!
Thank PJ . I always enjoy of your useful tips
Great to hear that!!
Great video once again! Thank you!
My pleasure!
That is just SUPER!!!
Glad you like it
wonderfull..
Gold you like it!
Thanx
No problem
Very helpful tutorial PJ thanks
You are welcome, John.
Thank you for the videos and tutorials are realy helpfull and looking forward for more 🙏
that is great! and welcome to my channel!
Cool....Cool....!!
Thanks
Simply amazing
Glad you think so!
thank you again PJ, A very interesting tutorial!!
You are welcome Josja.
Your tutorials are among the best I have seen, thank you. One question for you, at 10:20, what is your preferred method to set the gumball to the absolute center of the shape? Odd-numbered star shapes always suffer from non-centered pivot points as the center of the bounding box for the selected items is not the same as the center of the star-like shape. Curious about what your approach would be.
It depends on what you like to center with. the area, volume, distant? it can be all set up in rhino. for example. if you like to center by distant. you can always draw a curve and snap in the middle.
Nice
thanks!
Excellent video, Thank you
You are welcome!
Thank you alot! Can you please post more videos about organic forms in jewelry design? Many thanks in advanced
You are welcome, Niazi. More videos to come.
I really like all your videos. you Design on Rhino but for me i design on Matrix 8 ... Good and keep move to the future... Good Luck
thank you!
Awesome video, I learned a lot! Thanks
that is great!
Very interesting...thank you pj
You are welcome, Anees.
Thank you so much =)
You're welcome!
Very good! Thank you!
You are welcome, Hugo!
Thanks a lot sir 😊
You are welcome!
Thank you master
You are welcome!
Thank you sir
You are very welcome!
The video is great !
Thank you.
Thumbs UP PJ!!!
Thank you Ani
Can you please show us your material and render settings? It looks great! thanks.
I have keyshot rendering tutorial on the playlist. It shows all my setting for the keyshot rendering.
Supper
Super
Sir plz Make a video of making a necklace
what kind of necklace?
@@PJChenJewelryDesign basic round necklace
Amazing....!
Thanks, Alejandro. Cannot wait to see you use this method to build something.
@@PJChenJewelryDesign you' ll see....soon ..thxs
How can you close the surface above and below? That it becomes more solid
blend surface
ur just scale the inner shell in 2d, so it will be outside the inner one.
多謝！
Harry Wong 不客氣。歡迎你來到我的頻道
👍!
Thank you
i have this question what is the minemum offset for surface for good casting i work with resin
It depends on the design. what is the design look like.do you have image
@@PJChenJewelryDesign yes how can i send photo
PJ, are you ok? I hope you're well. What can I say about your tutorials? Show, perfect, sensational. My sincere thanks. Thank you, always. Success for you.
Thank you Gabriel!!
Why not use sweep rail2?
There is always more than one way to model the same model
How to use this model for product manufacturing just as inventor and fusion360
Rhino doesn't have that function. Does anyone in this channel have better tips on this question?
Thank you PJ! I have a doubt , when I switched on the points it only appeared on the top and bottom of the loft , mine didn’t have any in the center.. is there a reason why ?
maybe to try rebuild and make sure degree is 3
sir tell me this last one you just told me about closed solid polysurface and this effects on object like gold pattern sir?
not quite understand your question?
@@PJChenJewelryDesign sir it meant ( CLOSED SOLID SURFACE) Which showing gold effects sir