Wow!!! You are great helpful for the beginners like me wanted to start a new found skills turn to $$$$ love the way you explained from A-Z ,looking forward for more video like this tips about the laser crafts and the ADVANTAGES AND DISADVANTAGE OF LASER. BUSINESS..❤️💗
Awesome because I can’t wrap my brain around how you’d angle the cup to account for the difference in width between top and bottom when using the laser horizontally. 🤦🏻♀️😂 I’m sure it’s super simple but my brain can’t brain today. 😂😂😂
@@rsl9594 I tried making these a few different ways. First I tried leveling the top and engraving it, then leveling the bottom and engraving it separately. It was a big fail. I find it works best if you make your design all one piece and only level it once in the center. The bottom get's skewed a little bit but it's really barely noticeable. I guess it depends on the design you choose. But that way the seam stays in the same spot.
Hi Kerri!! Thank you so much for your tutorials!!! How long did you cut the PVC pipe? I purchased the cup holder adapter that you gave the link to, but you did not link the PVC pipe. I bought 2 ft. sections of the 1/2" and 3/4" PVC pipe from home depot, but I'm wondering how long the pieces need to be?
I have a question for you I bought the attachment like you have for the Tumblers and the PVC pipe where does the PVC pipe go into the actual teeth that it came with can you please let me know before I try thanks so much
The holder has a screw on the side to lock into the PVC pipe. Then I flipped the large od jaws upside down and grabbed on the inside of the pipe with the chuck
omg that was so helpful i have been struggling i am gonna follow this step by step thank you so much
Happy to help! 😊
Learn how to install the rotary jig attachment in this tutorial: ua-cam.com/video/gtpNhE-xQho/v-deo.htmlsi=irROkKXDiDFClaZo
Wow!!! You are great helpful for the beginners like me wanted to start a new found skills turn to $$$$ love the way you explained from A-Z ,looking forward for more video like this tips about the laser crafts and the ADVANTAGES AND DISADVANTAGE OF LASER. BUSINESS..❤️💗
Thank you for your kind words and support!
Will there eventually be a video showing how to do a full wrap with this machine?
I'll work on getting one up for you soon!
Awesome because I can’t wrap my brain around how you’d angle the cup to account for the difference in width between top and bottom when using the laser horizontally. 🤦🏻♀️😂 I’m sure it’s super simple but my brain can’t brain today. 😂😂😂
@@rsl9594 I tried making these a few different ways. First I tried leveling the top and engraving it, then leveling the bottom and engraving it separately. It was a big fail. I find it works best if you make your design all one piece and only level it once in the center. The bottom get's skewed a little bit but it's really barely noticeable. I guess it depends on the design you choose. But that way the seam stays in the same spot.
Yes! Please do a FULL WRAP TUTORIAL on a 40 oz tumbler please! 😊 im looking to purchase this machine but can’t seen to find any tutorials on it.
Thanks for the info! Just ordered the Vista so doing research to figure out how to use it!
You're welcome! You're going to love it!
I love those cups!
Thanks, me too!
How does the laser readjust focal distance for the skinny bottom portion to do a full wrap?
Thank you! Can you link the pvc extenders that need to be used with the Tumbler Holder Attachment
it's just a 3/4" or 1/2" piece of PVC pipe or wood dowel about 6" long
Hi Kerri!! Thank you so much for your tutorials!!! How long did you cut the PVC pipe? I purchased the cup holder adapter that you gave the link to, but you did not link the PVC pipe. I bought 2 ft. sections of the 1/2" and 3/4" PVC pipe from home depot, but I'm wondering how long the pieces need to be?
Hello! You're very welcome. I cut it 6 inches long.
@@Cricuter Thank you so much!! 🥰
Excellent video. Thank you. I see we need 3/4" PVC to go with the extender, but I don't see where it says how long it should be.
It should be 6 inches
I am unable to see your Amazon link for the extender
@@glorydazs1 amzn.to/3N0hY3p
Did you try to use the extender attachment that comes with the rotary? Or do you have to have that attachment?
Here's a new tutorial on how to connect the jig to the rotary attachment: ua-cam.com/video/gtpNhE-xQho/v-deo.html
What if we want the engraving on the other side of the cup?
Do you have the settings for the black tumbler? Thank you
Same as white
I have a question for you I bought the attachment like you have for the Tumblers and the PVC pipe where does the PVC pipe go into the actual teeth that it came with can you please let me know before I try thanks so much
Here's a new tutorial on how to connect the jig to the rotary attachment: ua-cam.com/video/gtpNhE-xQho/v-deo.html
What is the piece you put under the tumbler?
it's part of the rotary attachment that comes with the WeCreat rotary
How did you lock the pvc pipe in?
The holder has a screw on the side to lock into the PVC pipe. Then I flipped the large od jaws upside down and grabbed on the inside of the pipe with the chuck
Do you have a video showing how you engrave the top and bottom of the 40oz tumbler?
I'll work on getting one up for you soon!
@@Cricuter Have you had a chance to do this yet?