Dangerous lathe technique!! Cutting H-beam iron with a lathe for making frame hydraulic press
Вставка
- Опубліковано 12 січ 2024
- This lathe technique can be a solution when you don't have a milling machine. I turned an H-beam iron to make a frame hydraulic press..
- Наука та технологія
Только одно могу сказать на этот бред... Болт забитый с молотка держится лучше чем гвоздь завернутый с отвертки)
Видел чудеса токарной обработки и сам работал токарем но ТАКОГО !!!!!!
now that's what you call a 'widow maker'
I wouldn't even be in the same room!
0:06
Definitely slower
Only 1 bolt holding the Tool to the Post!
And how in the hell was that 2 min grind job worth the risk. Ahh because you could?
What risk, he put at least twenty spot welds on that nut so the tail stock would run true. With that many welds he had to get penetration through that rust and paint.
I don't know why he didn't chuck a fly cutter and the beam to the lathe bed. Same result and safer.
I'm pretty sure a cutoff saw would be faster and safer. Since the location of the live center wasn't made precision its not like the facing operation was highly square or anything.
Автор когда-нибудь слышал про фрезерный станок? Нет? А он есть!
Какая необходимость в такой точности?
Такая обработка металла ещё раз подтверждает что "они" верят в реинкарнацию. В следующий раз он родится сразу токарем пятого разряда
where I work, we use a saw not a plasma cutter to cut. Don't understand why there was a lathe involved in this or why you would need a milling machine. Looked like a straight cut. Am i missing something?
Nope not a thing.
I don't know about you but that operator is play with hand grenades.
Never seen such a stupid way of squaring a beam up
Видео видимо пытались снять для другого жанра. Но двутавр упорно не хотел вылетать из станка 😂...
Круто!!! Задача выполнена. Масса - к шпинделю станка; резец зажат в резцедержке одним (!!!!!) болтом; под резцом - ворох подкладок...А мы тут заморачиваемся....
Скорость маловата, вот 1800-2000 оборотов самое то...чистота же страдает....
Точность нужна для того чтобы была, вот поэтому индийский Чандраян-3 аккуратно и точно в заданном месте прилунилсился на Луну, а рассийский Луна - 25 на всех парах воткнулся в Лунную твердь и в лепёшку
А не проще было лентой отпилить?..
@@72AGShturman они не ищут лёгких путей, надо было этот ржавый швеллер засунуть в андроидный коллайдер , а потом без средств защиты держать этот швеллер в голых руках обработать его гамма частицами в ядерном редакторе
@@72AGShturman Ленточки скорее всего нету, как и инженера по ТБ, а молодости, дурости и токарей - в избытке)))
Безумие и отвага😅
Ну а варить на токарном не защитив направляющие и пустив массу через подшипники шпинделя!!!
Это 80 уровень рукожопа 😅
Saya harap anda melihat video secara detail, bukan hanya menonton sebagian lalu berkomentar banyak
Ты прав на 100%
@@Yantoo А в чем он не прав ? Я бы и 100й уровень поставил с таким подходом .
@@Yantoo I saw you put the ground clamp in the spindle! The current isn't going through the spindle bearings!
Either he wants to be correct on everything or, like you said, didn't watch the whole video!
не безумие, а слабоумие
Would have never thought of that, Thanks
Номинант на премию Дарвина!🤪
would be quicker by grinding!
and less risk 🤔
I was going to say that
Running that stick welder through your lathe bearings?
Actually this was the only smart thing he did that was the negative electrode he put in the back of the lathe until it made contact with work piece.
@@patrickradcliffe3837 是的,电流没有通过轴承。但是工字钢这样加工,一旦螺丝帽掉落,很容易拍到脑袋上................
Life is cheap there, obviously. And we end up buying their products. I could feel that hunk of iron coming off the lathe and tearing me up.
And we end up buying their products NOT ME. I prefer product made in North America, South America, Central America, Europe, Japan, S Korea, SEA and few other free market countries.
Hello Yanto,
interesting. Thank you.
Frank 🙋♂️🇩🇪
Thanks for your Frank ♥️🇩🇪
luckily the safety squints and safety open toe slippers are up to spec.
Seorang mekanik pasti faham apa yang harus dilakukan ketika mengerjakan pekerjaan yang beresiko tinggi. Good luck
Maturnuwun mas ♥️
Keep in mind that just because they got away with it this time dosent make him smart.
Зачем балку торцевать на токарном станке? Что бы потом изготовить из нее пресс :))))))))))))))))))) Гениально) Такой точности даже нет на заводах, которые производят прессы для автомехаников :))))))))) Пишу так для тех, кто будет переводить мой комментарий :))) И для тех, кто знает мой родной язык, тоже напишу. На кой хрен надо было так изголяться? Торцевать балку, для сборки пресса:))) Потом ее при сварке уведет а при эксплуатации она будет ваще без геометрии:) Мало кто зажимает так балку в токарный станок. Не потому что не умеют, а потому что выживают не все:::))) А масса на станок, это просто изюминка :)))
Вы смотрели на станок - вот и не заметили, что за время съёмок поменялось 5-6 "потратившихся" токарей)
Alles wat je maar verkeerd kan doen in 1 filmpje! Als je een beetje fatsoenlijk snijdt met je snijbrander is het eigenlijk al haaks en recht...en wat dacht je van een haakse slijper???
face milling?, safety shoes?
Можно ссылку на магазин, где продают запасные глаза?
Use an band saw to cut in angle.
Use a* bandsaw*
That's a few beers short of a sixpack, you can accomplish the same thing with a square and a grinder, he has to grind off the nuts anyway. I'd hate to see their liability insurance, what am I saying they don't have that.
Lanjut part 2 3 4 sampai jadi boss,pengen tau cara bikin pres hidrolik
Iya mas.. pasti saya selesaikan smpai bisa dipergunakan
Cool work thanks 👍
❤❤ 😂, abrazo José desde Uruguay.
Josemaciel Uruguay ♥️😍😘
@@Yantoo ❤
❤
👏👏👏👏👌🏼
Excelente trabajo, amigo.!
Siempre estoy aprendiendo con tus videos.!
Gracias.!❤👍
👍👍très bien.
Terimakasih saudaraku Francometalo♥️
Was hat dieser Mann für Schuhe an beim Brennen ?
Sandals 😁
How to make line boring in shop
Hát ez tényleg veszélyes munka ügyes vagy.
Мне показалось, или он массу на шпиндель крепит?😦
Походу что-то подобное замутил
на 2. 12
Кстати правильно делает. Чтобы сварочный ток шол не через подшипники,а шпиндель- патрон- деталь.
@@user-vp1uf2tt9h А в чем проблема зацепить "массу" прямо на деталь , поближе к месту сварки ? Оказывается "рукожопость" явление интернациональное .
@@user-le2mi6rk6q Обращать внимание и мусолить мало значимые вещи вот интернациональное явление.
Amigo te quería hacer una pregunta espero me respondas, yo podre hacer una valvula de disparo para un rifle pero con aluminio o no se puede hacer de aluminio espero me respondas amigo
Lebih baik menggunakan stenlis kalau anda ingin menggunakan dalam jangka panjang..
@@Yantoopero si la hago de aluminio no sirve porque
@@Yantooquiero hacer una pero de aluminio para que no pese tanto el rifle y ahora estoy con esa duda si funciona o no, si la hago de aluminio me funciona igual o cual es el problema
@@Yantoopero puedo hacerla si quiero osea funciona solo a 2000 psi
Saya pernah membuat senapan angin dari bahan aluminium dan mampu di 3200psi.
ua-cam.com/play/PLSnPiuesb1aVSUo9nvcpeFqAT9ycqi6TJ.html&si=xUlJRTAVHzxiYcJ6
болгаркой ни как!?
What is the point of this? I might be just a welder, but this seems unnecessarily dangerous.
1 Bolt Holding the Tool to the Post too!
И как часто там токаря требуются интересно😂
다음엔 대포탄환을 가공하는 영상을 부탁합니다.
Bosqu bisa pesen ga besi bja od 22 diboring diamtr dlm od 8 pnjang 80 cm🙏
Only if it comes out of a cruise ship
если есть "фортуна"(болгарка) зачем торцевать на станке ? После торцовки будет сварка . Он бы ещё перед сваркой тогда отшлифовал, пришабрил и заполировал .
cela aurait été plus simple avec une fraiseuse, non ?
the cutter is poorly secured
Just because you can, doesn't mean you should!
Болкаркоё отрезать не пробовали?
Mau bikin Alat pres ya om?
Iya bang
Mantap om.Jangan Lupa part selanjutnya
Safety flip-flops?
Wah baiklah Bro Seram lebih cepat kamu daripada aku 😲😲😂😂🤘🤘
Terimakasih mas e ♥️
Из рубрики: Как и для чего!?🧐🤦
¡Lo único constante en nuestras vidas es el CAMBIO!
Seriously? Why would anyone do that? If you REALLY need to face the end of mount the piece to the compound and put a cutter in the headstock. You set it up to get the center web, then do both ends of all your parts, then to do the ends, and do all the parts and it's done. But I guess you don't get weld through the bearings then.
Для этого есть ленточнопильный станок
Технику безопасности придумали жалкие трУсы!!! 😮. Я плАчу!!! 😅
밀링 없나?
Hebat s mang 🎉🎉🎉
Название для завлекухи. Торцевание на токарном станке известно очень давно.
Была ли необходимость делать эту операцию на токарном станке, едва ли
Wow, kalo saya sih ngeri
Mending cari sand belt aja deh, alon2 😂.
Ato mungkin bikin holder buat amplas bulat untuk mesin bubut, bendanya dipasang di eretan.
Cuman Ide, belum pernah dapet kerjaan segede gitu. 😄
There's a reason for that.😅
@@vicferrari9380I don't know the reason, that's why 😂
Didn't even bother to cover the ways when welding over them. Hmmm. That answers a lot of questions.
Video on, what not to do.....
Well, the video title does say it's dangerous. But it forgot to also say that it destroys the bearings in the lathe as well (not the cutting, the welding).
Another thing it doesn't mention is just how stupid this idea is.
This video needs to be seen and understood, not just seen a little and then commented a lot... the video shows that the welding mass passes through the spindle hole and does not pass through the bearing.
@@Yantoo And just how does the electricity for welding /not/ pass through the bearing? I most certainly didn't see a ground clamp on the I-beam.
Minute 2:11
très dangereux comme méthode. Mais beau savoir faire
flip flops no safety glasses why is a 20, 30 or 50 pound I beam flying around to cause concern . LOL
Что то из разряда круглое носим, квадратное катаем :)
👍👍👍
Mas bisa mintak alamat bengkel sma no wa nya mas ok thanks..
Отрезной станок, не не слышали. 😂😂😂
Tiền vậy cho nguy hiểm
wf lebih tepatnya
І що ти вася цим хотів показати ????
A good bandsaw would make more sense!
why so fast
Mit einer Kap oder Bandsäge machen wir das , man darf euch kein Werkzeug geben 😢😢😢
Ах торец у балки проторцевал ! Спрашивается на какой ... ? Резец выставлен с боОльшим вылетом и зажат одним болтом ! Как не вырвало и не загнуло и в лоб ничего не прилетело .
Apa ada no wa yang bisa di hubungin???
No way in hell I would try that
No shoes , no eye protection,
Least of their proplems.. he loses an 👁🗨 no one cares but his mother. It makes him a marter
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
А что, и так можно было? :)
Part 2 nya.
Belum upload bang, masih proses perekaman 😁
У него есть болгарка и он токарным станком торцует двутавр????? Пиздец.... За сварку прямо на станке, да еще к конусу, ему нормальный токарь гаечным ключем по голове заедет. И будет прав.
Gas cutting with flipflops on??? Nope!! Cant watch no more!!🙄💥💥💥🍺💪👍👍
最好還是不要這樣加工 那是他們沒銑床 萬一加工過程一個閃失 機台撞壞 人受傷 都不划算 反而覺得這樣沒有比較厲害 不要學
Отрезал резаком и приварил, зачем еще торцевать
Oh hell no!
Пиздец, как может быть такое, что токарный станок есть, а ленточнопильного нету?
Это он так отторцевать решил? Да уж.
engage safety squints
thats an I-beam
also not the best way to get a flat edge.
don't drop it on your toe
Саранча
Шлепки)))) !!!!!!! Все остальное просто мелочи
Переходящие шлепки. Когда тратится очередной ляподей, мастер берет освободившиеся шлепки и кидает их через забор фабрики в толпу безработных. Кто поймает - становится новым ляподеем )))
Тб! Тб! Тб!
Смертники...
Yeah, but no.
Everything you need to do to go blind wreck your feet, and every part of your body
There is a saying fools never list or take advice.
Absolutely no safety to protect the workers
lol They are i beams not h beams...
Harjobeling mania ki
Bener mas, sampean ngerti to
Можно и без товарного станка,но у них есть поэтому и выебываються 😢