@@Bolt6604 my rep said a new style similar to the Libre has been approved in Europe and is waiting approval here. Maybe tell the FDA that it may or may not prevent Covid19 and is made by Pfizer.
You’re correct this thing is a POS. They are way behind in the sensor. I sure wish I could use the Dexcom or Libre sensor with my Medtronic pump. I hate those sensors, I can never get a full 7 days out of it. I live alone and can’t put it in myself in the back of my arm. I like the results when it works and like the pump but I sure wish I would have tried the T Slim product.
I stopped using my sensor because it hurts and it always bleeds under the sensor and tape. This was a great demonstration and I'll try it again, tonight. Thanks so much!!!
I had a bleeder once while I was making a video, it happens from time to time. Bleeders can still function properly so don’t get discouraged. Glad this video helped
@@btrusty31This particular sensor is not rated for use anywhere on the body other than upper arm. Using a BGM incorrectly could lead to inaccurate readings from the sensor, and ultimately to Hypo- or Hyperglycemia. .
Excellent video, thank you! The way you use some fingers to hold the base while others to remove the needle was what I needed to see, and not present at all in the Medtronic video. You gave me the help I needed to succeed! Well done!
I always, always remove that paper backing from the adhesive before insertion. I don't know why Medtronic doesn't recommend doing that. I have never had an issue and it makes it so much secure right from the start.
It's super-hard to get that piece of backing off the sensor if you don't remove it first . . . at least when you are doing it yourself. I liked Rob's other video on doing this, the one when he was not identified as a Medtronic spokesperson. It's on his UA-cam channel as well. In that one he removes the backing before he inserts the sensor. And I think he used SkinGrip on that one, a much better taping system than the stupid Medtronic tape.
This sounds like a smart move. 👍👍👍 But my experience with infusion site changes keeps me from trying. Too much sticky stuff to get STUCK on the inserter device.🤣🤣🤣
It’s funny, I was also taught that way 🤣 like Denise said I do it that way in my other video but technically it’s off label so in this video I do it the way the label says.
@@denisespooner4933 I found a tape that works pretty good for me when I tape my sensor. That tape that Medtronic sends didn’t work out for me either. I live where the humidity can be unbearable at times and the Medtronic tape starts peeing off especially when l break out sweat. The tape l use is nexcare flexible clear tape for discreet hold. You can find it at Walgreens and Publix pharmacies. Don’t try the other brands of clear tape. It’s also inexpensive and it really works
I tried the self-insertion on the arm once years ago, and I bled so badly i passed out.Thank you for this video it looks like I will be able to figure this out now!
Sensor tape is great for taping the first part of the sensor. The second piece I make sure the entire transmitter and sensor is covered. I make sure no edges are open to grabbing, snagging and pulling the entire set off and having to start another expensive sensor.
Received this product 3 weeks ago. Extremely angered. I have been ripped off. Near impossible to properly insert without assistance. I live alone (nobody to help me with this). I went thru a month's supply of insertion sets in 2 weeks. This is why they invented class action lawsuits.
You make it look easy…I simply don’t have the dexterity to do all that with one hand. I’m also very thin, no body fat on the arms at all. I have found the sensor doesn’t work if it his muscle. I have problems with my abs as well
I need someone who has severe arthritis pain in their hands to demo this. Lol. You make it look so easy. It's not so easy in any situation. I think this was a big fail on Medtronic's part. Just an opinion, that's all. It's so frustrating.
Thank you Rob for presenting this information! It is very useful, and I am looking forward to viewing the rest of your video's as well in order to learn tips and tricks that I may not have been aware of previously! I have been using an older version of a Medtronic Insulin pump for years, but without the BGM. As such I am brand new to the BGM Sensor game and there are a bunch of extra bits of minutia to take into account! For example: I now have to contend with making sure that the sensor is fully charged prior to swapping the old sensor for a new one. I am not finding any information in the user guide that states just how long it's supposed to take for the device to be fully charged. I have had the sensor sitting in the charger as I've been researching videos and now charging is finally done! It took approximately 20-30 minutes for the green LED to stop flashing... which is the indication that the device is now fully charged. Wow...that was a lot of typing just to say the sensor takes about 30 minutes to charge!
I had a problem due to my arthritis. I couldn’t grip the needle stick either. I was alone and thought I would have to call my stepdaughter to come pull it out. I cracked a door open and put it inside the door and held it closed and took a step back and it pulled out. I’m open for suggestions on that because I really like putting the sensor on my upper arm
Timothy, our technical support team, or MiniMed Ambassadors may be to help with some tips. To connect with our technical support team, give us a call at 800.646.4633 option 1; to connect with our Ambassadors, click here: bit.ly/1wdUET1
Matt, the sensor and transmitter are water-resistant at 8 feet for up to 30 minutes. CGM readings may not be transmitted from the CGM to the pump while in water.
Have you run across an issue where the clear plastic layer between the sensor adhesive and plastic holder stays on the sensor. I've ruined two of them, now I will check between loading the serter and applying it to my skin.
Wow, I’ve failed miserably trying to use my arm, thank you. Also just learned I’ve been inserting completely wrong ever since the Guardian sensor was introduced. Many thanks to you!
To remove the plastic upright piece once I've inserted the sensor, I use the first and second fingers of my hand, grab the plastic piece at the base, squeeze and lift it off gradually. Much easier than the four finger method. Also don't use the second piece of oval tape. I use three pieces of 3M Derma tape and place it over the installed sensor.
I do my abdomen as it easier for me to shave that part due to being hirsute, I think shaving the back of my arm would be more problematic as well as taping it properly so it does not get affected by clothing and movement etc
When used on the abdomen , doesn't it take over an location that the infusion set should be using??.......CGM =7 days.........infusion set= 3 days....conflict of interest???
The fact that just cleaning the transmitter after use is a real chore, makes other options 100% better. Medtronic doesn't seem to bother getting users' advice.
I wore the sensor on my stomach. I got so tired of it alarming during the night that I took it off. Don’t use it anymore. And yes the sensor tape is trash.
@Scott VanLue He didn't do the tape as prescribed by Medtronic. 1st attach transmitter, THEN place the 1st oval tape. Then, place the flap tape and finally place 2nd oval tape in the opposite orientation of the 1st oval tape.
You're supposed to clean the transmitter every time you change the site. Use the green transmitter test item, then clean with high strength alcohol on cotton ball
Have you ever used Fixic tape? I've found it works well with the Guardian Sensor 3, but I'm concerned about taping the Fixic independently in the arm with Guardian Sensor 4. Thank you for the video showing how to insert it independently.
I see people use their forearm and i have even done the inside of my arm before - refer to your user manual for official placement guidelines but I think you can experiment with different arm placements to find what works best for you
I have been successful with my installations for the last few weeks so I was beginning to gain in confidence. However, I did a new sensor installation two days ago and all seemed fine. However at lunchtime today, I began getting warnings that my sensor wasn't working properly. I have no idea why this occurred and, of course, there is no explanation. I have just done another sensor installation and all seems OK but, who knows. I now have only one sensor left from my box of five and the next box isn't due to be delivered until after April 1. So, I'm going to be short of two sensors. There are too many faults with the sensor itself and the method of installation for me to discuss here but I really question if this product should to be on the market at all. It is unreliable, costly, and inaccurate. I can't express how disappointed I am in this device and in Medtronic.
We're sorry to hear this, Tim. Our technical support team can help with your sensors and may be able to send you replacements. Please give them a call at 800.646.4633 option #1.
I've used the Medtronic pump in the past for 12 years. I really liked Medtronic but am currently using the t:slim X2. I would prefer the Medtronic pump but until they can provide a decent sensor, one that is smaller, integrated with the transmitter, lasts longer, and is easier to fit, I will not use Medtronic products. I can't believe that an otherwise cutting edge company is so far behind a number of manufactures in the sensor space. It's a shame because their pump technology is very good. Interestingly, a couple of years ago I moved to a different area in the UK and was assigned a new diabetes clinician and she advised very strongly against Medtronic, mainly due to the hassle of fitting the sensor.
Hi Brian. Our Guardian Sensor 3 sensors can be worn on the back of the arm between your elbow and shoulder. Please click here: bit.ly/3DoM9vG, for more information.
We're sorry to hear about this. Have you been in touch with our Technical Support team yet? Please give them a call at 1-800-646-4633, option #1. Thank you.
Thanks for taking the time to show us and explain this insertion process, What do you do to help with detachment from perspiration that affects the adhesive contact? I am a profuse perspirer and I have a very difficult time keeping the sensors, etc. attached because of it. I have tried antiperspirant under the adhesive and extra over-taping. Nothing seems to do the trick.
Hey Don, I’ve also had those challenges especially during the summer when it’s warmer outside. Unfortunately it’s one of those difficult problems to solve - I find the back of my arms sweat less than other sites and I nearly always use additional tape (I like skin grip) to cover my sensors. I hope this is helpful.
@@DiabeticsDoingThings, thank you for the quick response. I have not heard of the skin grip product. I will check it out. At the very least, your admission of a similar struggle makes me feel like I'm not the only one dealing with it. Thanks again!
Hi, Bruce, the best performance was observed when the sensor was used in the arm. For safety reasons, therefore, the system is indicated for use in the arm. However, if another site is needed, please work with your HCP to assess.
I live in area where the humidity is unbearable. The Medtronic tape stats peeing when l break out a sweat from doing choirs and working out. I live near the gulf coast
Hey Rob, great video. Two questions, first I put both pieces of oval tape on after I connect the transmitter to the sensor, rather than putting the first piece of oval tape on, connecting the sensor and then adding the second oval tape. I figure that gives me two pieces of oval tape covering everything. Which way is better and why? Second question, I see you also end up with a lot of residual glue on the transmitter. I find the residual glue interferes with plugging the transmitter into the charger and into the sensor. Is there a good way to clean the transmitter without potentially damaging it?
I use a product called "Detachol" to clean the residual adhesive from the transmitter. Usually I use an ordinary Q-Tip or cotton swab to get into the smaller contours, then I clean with an alcohol swab. This routine keeps the transmitter squeaky clean. Using the green plug to protect the electrodes is also a good practice.
Hey John, great questions. The way I use the tape in the video is the proper on-label way, but your way also sounds effective, so my non-medical advice is it comes down to your preference on the tape. Regarding the residue on the transmitter, yes it can be frustrating and difficult to get off. I have used uni-solve wipes in the past which make a big difference for me. Thanks for your comment!
John, I used to do your way. Well, until I found Smith&Nefew over tape. Now I don't use the oval tape for the sensor at all. Oval tape is only useful for pump infusion sites, and only one piece, when needed. The oval tape residue sticks to the transmitter better than it does to the skin.🤣🤣🤣 You almost need acetone to take it off.🤣🤣🤣 BUT don't try that!!
This is a great tutorial but the fact that this isn’t in the manual is negligible. It’s taken me way too long(years) to find this information, even after mentioning it to my endocrinologist.
Hi, Kris. We're sorry to hear that this information was hard for you to find. We do have links to the user guide for sensors like the Guardian 4 sensor available on our website (www.medtronicdiabetes.com/sites/default/files/library/download-library/user-guides/Guardian_4_sensor_user_guide.pdf). Sensor insertion is detailed on pages 7-14. Thank you!
It doesn't hurt me at all.. I think you would be surprised about how effortless and the very useless fear when thinking of the hurt. Perhaps I have more fat and therefore feel no pain.
I had a lumpectomy due to cancer in my left breast several years ago. I have been told that I can only use my right arm for vaccinations and for blood tests. Would I be able to add the sensor to my left arm?
Two pieces of tape....one handed??? I find this rather awkward. I have attempted to use a different brand of tape that is basically an oval flesh-tone adhesive. It is a single piece.........I purchased this because it was categorized as a Medtronic adhesive pad........any feedback on this as a replacement for the two pieces used in your video?
Thanks for the video! I'm using the Guardian 4 sensor and just inserted it in my arm for the first time (after inserting in my stomach area for several years). Question: Does it matter if the transmitter is facing up or down? I seem to recall something about placing transmitters so they're horizontal rather than vertical. Thanks!
Methtronic sent me some stupid backwards tape and serter that requires 3 arms to really insert it. I've already WASTED 5 injectors trying to get 1 thing on my arm. After that I just gave up! The stupid chick who was "training" me had me put it on my stomach. And it didn't help that we were doing this "training" over video chat.
The one thing that is obvious to me, it looks ugly on the arm. You would think that they would have a more pleasant looking sensor that doesn't look like something that was just taped on. For now I think I will just go on without using it. Also, like everything else, very very expensive
After about 3 months experience with this cgm, I have finally reached the conclusion that it is a waste of time. At least 50% of the time something goes wrong when installing a new sensor. After the box on order now arrives, I’ll use the sensors but don’t plan on continuing. I’m fact, if I didn’t have such a long term commitment to Medtronic equipment, I would abandon this company completely and try one of the alternative manufacturers.
We're sorry about your experience, Tim. Have you been able to review your CareLink with our teams? This can help us get a better idea of your sensor's behavior which may lead to a better experience. If you haven't already, please give our team a call at 800.646.4633 option #1.
Hi, Joe. Have you had a chance to talk this through with our 24-Hour Technical Support team yet? They'd like to help and can be reached at 800.646.4633 #1.
I'm sorry but putting it on the arm is utter bs. I've wasted so much tape and sensors screwing around with this. I can put it on my stomach and thats where it goes. AND there are many issues with the sensors. So far I'm not happy with the 780G performance. AND btw that sensor you're using is filthy and should be cleaned.
Respectively, I think Medtronic needs an easier insertion. Period!
No idea when it’s coming, but I’ve seen mockups of the next gen and it looks much closer to the dexcom g7 luckily.
@@juliamelone8109 My rep told me there is a new one approved in europe and at the FDA right now that looks very much like the Freestyle Libre.
Yeah, its just a CGM that pairs. I mean look at the other CGMS Dexcom and Life Style Libre. So much easier. They really do need to upgrade it.
@@Bolt6604 my rep said a new style similar to the Libre has been approved in Europe and is waiting approval here. Maybe tell the FDA that it may or may not prevent Covid19 and is made by Pfizer.
You’re correct this thing is a POS. They are way behind in the sensor. I sure wish I could use the Dexcom or Libre sensor with my Medtronic pump. I hate those sensors, I can never get a full 7 days out of it. I live alone and can’t put it in myself in the back of my arm. I like the results when it works and like the pump but I sure wish I would have tried the T Slim product.
I stopped using my sensor because it hurts and it always bleeds under the sensor and tape. This was a great demonstration and I'll try it again, tonight. Thanks so much!!!
Try not to press the insert so hard against your skin. I let it hover just a tiny bit.
Try top of your leg. That’s where I put mine
I sometimes ice an area before I use alcohol. That can help with site bleeding.
I had a bleeder once while I was making a video, it happens from time to time. Bleeders can still function properly so don’t get discouraged. Glad this video helped
@@btrusty31This particular sensor is not rated for use anywhere on the body other than upper arm. Using a BGM incorrectly could lead to inaccurate readings from the sensor, and ultimately to Hypo- or Hyperglycemia. .
I couldn't figure out for the life of me how to pull the self retracting needle myself. Thank you
Same
Excellent video, thank you! The way you use some fingers to hold the base while others to remove the needle was what I needed to see, and not present at all in the Medtronic video. You gave me the help I needed to succeed! Well done!
But how many of us have the dexterity to do this?
Excellent! Thanks for the demonstration on inserting a sensor without the help of another person. Video was so well done! Thanks!
This is of great help!! Thanks. For the first time in years I'm now able to use my arm.
Well done Rob, your presentation was very professional and relaxed
I always, always remove that paper backing from the adhesive before insertion. I don't know why Medtronic doesn't recommend doing that. I have never had an issue and it makes it so much secure right from the start.
I agree I do the same thing.
It's super-hard to get that piece of backing off the sensor if you don't remove it first . . . at least when you are doing it yourself. I liked Rob's other video on doing this, the one when he was not identified as a Medtronic spokesperson. It's on his UA-cam channel as well. In that one he removes the backing before he inserts the sensor. And I think he used SkinGrip on that one, a much better taping system than the stupid Medtronic tape.
This sounds like a smart move. 👍👍👍 But my experience with infusion site changes keeps me from trying. Too much sticky stuff to get STUCK on the inserter device.🤣🤣🤣
It’s funny, I was also taught that way 🤣 like Denise said I do it that way in my other video but technically it’s off label so in this video I do it the way the label says.
@@denisespooner4933 I found a tape that works pretty good for me when I tape my sensor. That tape that Medtronic sends didn’t work out for me either. I live where the humidity can be unbearable at times and the Medtronic tape starts peeing off especially when l break out sweat. The tape l use is nexcare flexible clear tape for discreet hold. You can find it at Walgreens and Publix pharmacies. Don’t try the other brands of clear tape. It’s also inexpensive and it really works
I tried the self-insertion on the arm once years ago, and I bled so badly i passed out.Thank you for this video it looks like I will be able to figure this out now!
We're glad the video helped Colleen!
Sensor tape is great for taping the first part of the sensor. The second piece I make sure the entire transmitter and sensor is covered. I make sure no edges are open to grabbing, snagging and pulling the entire set off and having to start another expensive sensor.
I have arthritis in my knuckles, limited ROM in my shoulders and wrists, this is a major lesson in frustration.......
Hi, Debb. We're sorry to hear that and will share this feedback with our team.
Received this product 3 weeks ago. Extremely angered. I have been ripped off. Near impossible to properly insert without assistance. I live alone (nobody to help me with this). I went thru a month's supply of insertion sets in 2 weeks. This is why they invented class action lawsuits.
You make it look easy…I simply don’t have the dexterity to do all that with one hand. I’m also very thin, no body fat on the arms at all. I have found the sensor doesn’t work if it his muscle. I have problems with my abs as well
I need someone who has severe arthritis pain in their hands to demo this. Lol. You make it look so easy. It's not so easy in any situation. I think this was a big fail on Medtronic's part. Just an opinion, that's all. It's so frustrating.
Hi, Annie. We're sorry to hear that this is frustrating for you and will be passing along this feedback to our R&D team. Thank you.
Thank you! That made it easier than I thought! I have had Medtronic for several years and never inserted in my arm. ❤
We're so happy this video could help! Thanks for watching, Brittany.
Far better than the written instructions!
Thank you Rob for presenting this information! It is very useful, and I am looking forward to viewing the rest of your video's as well in order to learn tips and tricks that I may not have been aware of previously!
I have been using an older version of a Medtronic Insulin pump for years, but without the BGM. As such I am brand new to the BGM Sensor game and there are a bunch of extra bits of minutia to take into account! For example: I now have to contend with making sure that the sensor is fully charged prior to swapping the old sensor for a new one. I am not finding any information in the user guide that states just how long it's supposed to take for the device to be fully charged.
I have had the sensor sitting in the charger as I've been researching videos and now charging is finally done! It took approximately 20-30 minutes for the green LED to stop flashing... which is the indication that the device is now fully charged. Wow...that was a lot of typing just to say the sensor takes about 30 minutes to charge!
We're happy to hear that you found this video helpful! Thanks for sharing!
Thank you, I really appreciate people like you taking the time to show and help people like me, this is very helpful 👌 thank you and God bless. 🙏
There is NO way my arthritis deformed hands can do this 🙁 Please MEDTRONIC come up with a better system!!!
@@debwil5476 thank you so much for the suggestion 😊
I had a problem due to my arthritis. I couldn’t grip the needle stick either. I was alone and thought I would have to call my stepdaughter to come pull it out. I cracked a door open and put it inside the door and held it closed and took a step back and it pulled out. I’m open for suggestions on that because I really like putting the sensor on my upper arm
Timothy, our technical support team, or MiniMed Ambassadors may be to help with some tips. To connect with our technical support team, give us a call at 800.646.4633 option 1; to connect with our Ambassadors, click here: bit.ly/1wdUET1
Excellent job and video Rob. This helps a lot. Appreciate and take care.
Thanks Thomas!
Matt, the sensor and transmitter are water-resistant at 8 feet for up to 30 minutes. CGM readings may not be transmitted from the CGM to the pump while in water.
Thank you 3times 🎉🎉🎉 or more!!! 1:27
Wish your videos had been around when I first started viewing these UA-cam tapes. 4:45
Have you run across an issue where the clear plastic layer between the sensor adhesive and plastic holder stays on the sensor. I've ruined two of them, now I will check between loading the serter and applying it to my skin.
Wow, I’ve failed miserably trying to use my arm, thank you. Also just learned I’ve been inserting completely wrong ever since the Guardian sensor was introduced. Many thanks to you!
I find taking the initial peel away tape off while still in the inverter much easier. P.S. Boo Dallas Cowboys! Love, a lifelong Eagles fan 😂💚🦅
Hello 👋 Andrea
How are you doing today?
To remove the plastic upright piece once I've inserted the sensor, I use the first and second fingers of my hand, grab the plastic piece at the base, squeeze and lift it off gradually. Much easier than the four finger method. Also don't use the second piece of oval tape. I use three pieces of 3M Derma tape and place it over the installed sensor.
For me, laying on my side in my bed with my arm bent and propped up on a pillow helps to remove the needle and attach the transmitter.
I do my abdomen as it easier for me to shave that part due to being hirsute, I think shaving the back of my arm would be more problematic as well as taping it properly so it does not get affected by clothing and movement etc
When used on the abdomen , doesn't it take over an location that the infusion set should be using??.......CGM =7 days.........infusion set= 3 days....conflict of interest???
The tape flap is garbage. Also the supplied oval tape is garbage. Any other tape is way better, longer lasting and cleaner once removed.
I have always used the Medtronic tape, but only 1 for my transmitter!
Totally agree. And I didn't see him really explain the 2pc tape cause that didn't look right when he was done from what I seen
The fact that just cleaning the transmitter after use is a real chore, makes other options 100% better. Medtronic doesn't seem to bother getting users' advice.
I wore the sensor on my stomach. I got so tired of it alarming during the night that I took it off. Don’t use it anymore. And yes the sensor tape is trash.
@Scott VanLue He didn't do the tape as prescribed by Medtronic. 1st attach transmitter, THEN place the 1st oval tape. Then, place the flap tape and finally place 2nd oval tape in the opposite orientation of the 1st oval tape.
You're supposed to clean the transmitter every time you change the site.
Use the green transmitter test item, then clean with high strength alcohol on cotton ball
Have you ever used Fixic tape? I've found it works well with the Guardian Sensor 3, but I'm concerned about taping the Fixic independently in the arm with Guardian Sensor 4.
Thank you for the video showing how to insert it independently.
I never put the second tape on my sensor. I have never had one rip or fall off. I do use TACK after I clean the area with Alcohol.
how far on the back of the arm can the sensor be placed? Are there limits to how far up or far down it can be inserted? Thanks for the video!!!
I see people use their forearm and i have even done the inside of my arm before - refer to your user manual for official placement guidelines but I think you can experiment with different arm placements to find what works best for you
We're sorry to hear this, Brendan. How many times a day are you needing to calibrate?
This Eagles fan watched despite that Cowboys sweatshirt 😂 I find taking the peel off adhesive off while in the inserter much easier. Fly!
I have been successful with my installations for the last few weeks so I was beginning to gain in confidence. However, I did a new sensor installation two days ago and all seemed fine. However at lunchtime today, I began getting warnings that my sensor wasn't working properly. I have no idea why this occurred and, of course, there is no explanation. I have just done another sensor installation and all seems OK but, who knows. I now have only one sensor left from my box of five and the next box isn't due to be delivered until after April 1. So, I'm going to be short of two sensors. There are too many faults with the sensor itself and the method of installation for me to discuss here but I really question if this product should to be on the market at all. It is unreliable, costly, and inaccurate. I can't express how disappointed I am in this device and in Medtronic.
We're sorry to hear this, Tim. Our technical support team can help with your sensors and may be able to send you replacements. Please give them a call at 800.646.4633 option #1.
I've used the Medtronic pump in the past for 12 years. I really liked Medtronic but am currently using the t:slim X2. I would prefer the Medtronic pump but until they can provide a decent sensor, one that is smaller, integrated with the transmitter, lasts longer, and is easier to fit, I will not use Medtronic products. I can't believe that an otherwise cutting edge company is so far behind a number of manufactures in the sensor space. It's a shame because their pump technology is very good. Interestingly, a couple of years ago I moved to a different area in the UK and was assigned a new diabetes clinician and she advised very strongly against Medtronic, mainly due to the hassle of fitting the sensor.
nice job but the transmitter looks like it's covered in tape and not clean. kind of turns me off
All your videos are great! Thanks
Should show how to check for any bleeding that might occur after insertion...
My brother in law has tried these style cgm and hasn't had any luck due to his skin condition. He has trouble getting the tape to stay attached.
Hi Brian. Our Guardian Sensor 3 sensors can be worn on the back of the arm between your elbow and shoulder. Please click here: bit.ly/3DoM9vG, for more information.
what if you run into the issue with the Clear Plastic piece not coming off to reveal the wax paper
Hi, Dennis. If you need assistance, our Technical Support team is available 24/7 at 1-800-646-4633, option #1.
Thanks for the video. Great help.
We're happy to help!
We're glad it was helpful, Annemarie!
Yvonne, if your upper arm won't work for you, the Guardian Sensor 3 sensors, can also be worn on your abdomen.
Rob is using an approved tape and taping method.
I stand "corrected," on the oval taping steps. However, that tape is still TRASH.
I've run out of the oval tape, can I just use sensor patch?
I get senor in but pump won’t see it or recognize it and I have wasted 4 sensors
We're sorry to hear about this. Have you been in touch with our Technical Support team yet? Please give them a call at 1-800-646-4633, option #1. Thank you.
Thanks for taking the time to show us and explain this insertion process, What do you do to help with detachment from perspiration that affects the adhesive contact? I am a profuse perspirer and I have a very difficult time keeping the sensors, etc. attached because of it. I have tried antiperspirant under the adhesive and extra over-taping. Nothing seems to do the trick.
Hey Don, I’ve also had those challenges especially during the summer when it’s warmer outside. Unfortunately it’s one of those difficult problems to solve - I find the back of my arms sweat less than other sites and I nearly always use additional tape (I like skin grip) to cover my sensors. I hope this is helpful.
@@DiabeticsDoingThings, thank you for the quick response. I have not heard of the skin grip product. I will check it out. At the very least, your admission of a similar struggle makes me feel like I'm not the only one dealing with it. Thanks again!
Is the abdomen or arm better for transmitter accuracy?
Hi, Bruce, the best performance was observed when the sensor was used in the arm. For safety reasons, therefore, the system is indicated for use in the arm. However, if another site is needed, please work with your HCP to assess.
I live in area where the humidity is unbearable. The Medtronic tape stats peeing when l break out a sweat from doing choirs and working out. I live near the gulf coast
Hey Rob, great video. Two questions, first I put both pieces of oval tape on after I connect the transmitter to the sensor, rather than putting the first piece of oval tape on, connecting the sensor and then adding the second oval tape. I figure that gives me two pieces of oval tape covering everything. Which way is better and why? Second question, I see you also end up with a lot of residual glue on the transmitter. I find the residual glue interferes with plugging the transmitter into the charger and into the sensor. Is there a good way to clean the transmitter without potentially damaging it?
I attach the green thing to the transmitter, clean with PDI (adhesive tape remover pad), then with alcohol, remove the green attachment and charge.
I use a product called "Detachol" to clean the residual adhesive from the transmitter. Usually I use an ordinary Q-Tip or cotton swab to get into the smaller contours, then I clean with an alcohol swab. This routine keeps the transmitter squeaky clean. Using the green plug to protect the electrodes is also a good practice.
Hey John, great questions. The way I use the tape in the video is the proper on-label way, but your way also sounds effective, so my non-medical advice is it comes down to your preference on the tape. Regarding the residue on the transmitter, yes it can be frustrating and difficult to get off. I have used uni-solve wipes in the past which make a big difference for me. Thanks for your comment!
John, I used to do your way. Well, until I found Smith&Nefew over tape. Now I don't use the oval tape for the sensor at all. Oval tape is only useful for pump infusion sites, and only one piece, when needed. The oval tape residue sticks to the transmitter better than it does to the skin.🤣🤣🤣 You almost need acetone to take it off.🤣🤣🤣 BUT don't try that!!
This is a great tutorial but the fact that this isn’t in the manual is negligible. It’s taken me way too long(years) to find this information, even after mentioning it to my endocrinologist.
Hi, Kris. We're sorry to hear that this information was hard for you to find. We do have links to the user guide for sensors like the Guardian 4 sensor available on our website (www.medtronicdiabetes.com/sites/default/files/library/download-library/user-guides/Guardian_4_sensor_user_guide.pdf). Sensor insertion is detailed on pages 7-14. Thank you!
This is much harder with my short arms!
How do you remove the sensor if it doesn't connect by yourself?
Just got my Medtronic system and I can tell it’s gonna take me 10mins just work up the courage to press those green buttons.
It doesn't hurt me at all.. I think you would be surprised about how effortless and the very useless fear when thinking of the hurt. Perhaps I have more fat and therefore feel no pain.
I had a lumpectomy due to cancer in my left breast several years ago. I have been told that I can only use my right arm for vaccinations and for blood tests. Would I be able to add the sensor to my left arm?
You can absolutely wear the sensor on your left arm.
Great video, pity he fails to mention there really poor quality of the sensor, these sensors fail more often than not,
Two pieces of tape....one handed??? I find this rather awkward. I have attempted to use a different brand of tape that is basically an oval flesh-tone adhesive. It is a single piece.........I purchased this because it was categorized as a Medtronic adhesive pad........any feedback on this as a replacement for the two pieces used in your video?
Hi, Shawn. We will share this feedback with our team!
Thanks for the video! I'm using the Guardian 4 sensor and just inserted it in my arm for the first time (after inserting in my stomach area for several years). Question: Does it matter if the transmitter is facing up or down? I seem to recall something about placing transmitters so they're horizontal rather than vertical. Thanks!
Hi Elizabeth, as long as the transmitter light flashes green after connecting to the sensor, the direction should not affect the transmitter.
Methtronic sent me some stupid backwards tape and serter that requires 3 arms to really insert it.
I've already WASTED 5 injectors trying to get 1 thing on my arm. After that I just gave up!
The stupid chick who was "training" me had me put it on my stomach.
And it didn't help that we were doing this "training" over video chat.
The one thing that is obvious to me, it looks ugly on the arm. You would think that they would have a more pleasant looking sensor that doesn't look like something that was just taped on. For now I think I will just go on without using it. Also, like everything else, very very expensive
Please talk slower next time but thank you for the video 😊
After about 3 months experience with this cgm, I have finally reached the conclusion that it is a waste of time. At least 50% of the time something goes wrong when installing a new sensor. After the box on order now arrives, I’ll use the sensors but don’t plan on continuing. I’m fact, if I didn’t have such a long term commitment to Medtronic equipment, I would abandon this company completely and try one of the alternative manufacturers.
We're sorry about your experience, Tim. Have you been able to review your CareLink with our teams? This can help us get a better idea of your sensor's behavior which may lead to a better experience. If you haven't already, please give our team a call at 800.646.4633 option #1.
Like which company? Maybe you’ll be able to make more videos. Independently.
This sensor is horrible ! I can't do it by myself
Hi, Joe. Have you had a chance to talk this through with our 24-Hour Technical Support team yet? They'd like to help and can be reached at 800.646.4633 #1.
We're all adults. Stop with blurring the screen from real world insignia. If you have a brain, have your talent wear text less clothing.
I'm sorry but putting it on the arm is utter bs. I've wasted so much tape and sensors screwing around with this. I can put it on my stomach and thats where it goes. AND there are many issues with the sensors. So far I'm not happy with the 780G performance. AND btw that sensor you're using is filthy and should be cleaned.