I think that the bmax might struggle with even the smallest of home servers, maybe just a pihole and not much else. With pi5s being similarly priced though it might be a decent option.
I use a CNC router in my shop for woodworking. I used to control the CNC with a laptop but that died and I needed a replacement. I purchased a BMAX and mounted it to the back of a monitor to use as my CNC controller. While I wouldn't do any serious computing on it, it does work well as my CNC controller. It has decent WiFi connectivity, which I need for the CNC. After two years of living in my dusty shop it still is performing well. I think computers like these have their place as long as you don't overestimate their capabilities.
If it's fanless and all solid-state like the one here, it's going to be pretty hard to kill in a shop environment. It has basically no way to take in dust actively, and that little chip is so low-power that even if it did, there just isn't much heat to get rid of in the first place.
Yeah, a cheap mini PC is perfect for sticking in a garage environment. I've been considering an old office mini PC off Amazon or going with a cheap Beelink to put on the wall behind the old monitor I have on my small work table. It would be nice to have something basic out there for looking something up quickly or just streaming video while I'm out there doing garden prep, auto work or watching my kids play. I put a fire stick on the monitor last summer and it's nice to throw on a baseball game for a few hours.
@gdn86 Go fanless if you can. Anything that gets at all exposed to a shop environment will connect dust super quickly, and fan bearings tend to just die after a while even if the heatsink isn't already super clogged. With a passive unit you just have to clean it every so often.
@@sakork95z Mine was roughly 160 euro after discounts, I did add a 2TB WD red SSD to it. so I have enough storage and TBW for years to come. HASS is known to write a lot of data, killing SD cards, so i went overkill and got a 2TB SSD. so I have enough space that will never get FULL, and/or destroyed due many write-cycles
The Bmax is a media-box/thin-client. They are not meant to be used for gaming or anything like that. Even as an office-machine these are plenty of capable but that requires an IT-department or at least somebody with some basic knowledge on how to configure windows. At our local technical university they had some real thin-clients and switched to these mini-PC thinclients cause those were just marginally more expensive but far easier to setup and manage (and we were not bound to specific software and hardware vendors).
Windows 10 is an absolute pig. I would install a light weight Linux distro to squeeze more performance. The best case use for these is as a server or client for media center or streaming dongle replacement. These chinese use questionable license and not use a clean windows image. I would not use their software. N100 cost around the same and have slightly better performance.
At my work, we've found good use for these as a one-trick pony. These little nodes basically run a kiosk; the user taps their ID on the reader and the node grants them access to a beefier machine that runs a scanner (e.g. an MRI). We can't install the software directly on the bigger computer as it interferes with the computer's main function (and we can't control the vendor's maintenance schedule) so we just get one of these that will lock the computer.
I can tell you a use case for these machines that I have experienced firsthand. My aunt works for a medical billing company, and she works remote, so the company provided her with one of these little mini computers because all that has to do is run a couple of web pages and web interfaces, and drive two monitors. These machines are cheap and perfect for that kind of application.
The n100 chip has been a huge game changer for home servers with its native HEVC hardware encode/decode and highly efficient power usage. You can run an entire Plex stack while it sips power. Connect it to a low power NAS box and it’s a perfect combo
Indeed, its perfect for homeassistant as well. with it being more efficient than a Raspberry PI. and more powerful for less watt Sadly Minisforum discontinued the UN100C. or else I would have bought another one for proxmox [pihole and the like]
i got an awow mini pc off amazon for free had gift cards i won has 512gb ssd 16gb ddr5 ram and n100 cpu cost me around $145usd that included tax and shipping to new zealand and its decent at running games at 720p and playing emulators and its great for 1080p video editing
@@DizY_8you will probably like it better anyways. un100c m.2 is sata and the motherboard is "upside down". To get to the drives you need #1, #0, #00 screwdrivers and remove the motherboard. un100l looks right side up so you can change the drives without moving the motherboard and the m.2 is nvme. The losses are one ethernet port and 2 usb ports went from 3 to 2. usbc can fix that.
Yes, N100 are insanely good home servers and media servers. It's actually insane that Jay just skipped over all that. He did zero research for this video, and just bought two random computers, and for one of them, he basically just plugged it in, wiggled the mouse and watched a video, and called it a day. If that's not insanely low effort, I don't know what is.
I got one for $280. It has a ryzen 5800h I think with 16 gigs of ram. Has been our Minecraft server for the family for a year and a half. She does her job well 24/7!
I have a Beelink SER5-Max (R7-5800H/32GB RAM/500GB NVME Gen 4 SSD/Vega 8 graphics) I paired it with a portable monitor and use it as a laptop replacement. I have a dislike for laptop keyboards and touchpad.
Same here. Me and my friends got sick of renting servers. Plus we had 3 different games we alternate between. And renting 2-3 servers for different games can get expensive. Now we got 1 server that can swap between games.
These are perfect for basic office use and for people that only need laptop power, but don't want to spend laptop money, ruin a battery, and don't want a large desktop!
Got my boss to replace one of the PCs in my office with something similar to the second mini PC (one with a 12th Gen processor). I used the VESA mount to mount to the desk. So far, it works very well. Providing it continues to work well, I plan to replace the other two we have.
@@JeffTiberend I don't consider Dell a dependable computer. My last job was at a law firm. They replaced over a hundred desktops with Dell and it took Dell months to figure out why they wouldn't connect to the network. Then they had to get Microsoft Word to work on them. A conversion that should have taken days wound up taking months. I wouldn't take one for free.
My mom is 76 years old. I got her a mini PC since her previous computer was like 12 years old. I got the N100 processor with 16 GB RAM all for $159. Not a bad deal. All she does is read emails, watch some videos online and that's about it. No need to spend more money. I even mounted it to the back of her monitor. If you need something cheap to use as a media center, then I would consider something like this. Gets the job done.
That sounds like a good setup and those N100s have been a great step forward for that segment of the market. Another great option(options are good) are tiny used office PCs(Dell Micro, HP Mini, Lenovo Tiny). They're a great value and I've never had any issues with them due to being used machines. Sometimes, the power supply is a bit extra, and usually storage isn't included. Cost wise, they likely come in a bit lower than the N100, but the difference may be worth the peace of mind of having a new machine and the N100 will consume even less power. So it's definitely a good setup and deal there. As the other comment mentioned, I throw Linux on everything now. My mother took to Linux Mint very well after I set up her computer.
This is exactly what I would buy them for as well. Nowadays even my parents (late 70s) just use tablets. My father uses an old chromebook despite it's battery died and needs constant power. He has a tablet as well - maybe he uses his in bed or so. But he sticks to his chromebook 🤷♀️
I got me a N100 as a my office PC and a N200 as Home/Plex server. Upgraded both with 1x16 quality RAM and new quality 2TB M2 and SDD's. Seriously, couldn't be happier with these little devils
I bought a lenovo ThinkCentre M93P remanufactured last year before a back surgery that made me bed bound for a month and I use it just for internet surfing and UA-cam and twitch on my TV. I upgraded the 8 gigabytes of RAM to 16 gigabytes of RAM and the processor. And I freaking love the thing!
The whole Think series is just built different. I have a ThinkPad T14 and a ThinkCentre M720q on my desk right now. Both are built like bricks and I have yet to hear a fan ramp up in either.
I've got an M93p and an M73(I bought them at the same time). They're almost identical with the M93p having all USB 3.0 ports. They're fantastic machines. For about two years, I was recommending the M93p to a bunch of people. I referred to it as the best value for a computer based on how readily available they were online. I couldn't believe it when I saw them as low as $45 with the power supply a year ago. That's without storage. The fourth-gen chips are still good for general use and will be for a while, especially with Linux. The systems don't consume a lot of power. The reason I no longer refer to them as the best value out there is because sixth and seventh-gen machines have dropped in price more recently. I also picked up two of the HP mini systems, a sixth-gen and a Ryzen 2400G, and those are nice systems too. The HPs seem to be easier to find lately.
I bought my dad a Chewi Larkbox X for Xmas. I got it in a Black Friday sale for around $169. It does everything he needs it to do: email, internet browsing and Zoom calls. He even has it mounted to the back of his monitor with the kit that came with it. He’s also been tinkering with Linux on it via a USB C drive. I 100% recommend it for anybody in your family over like 70 who you have to help with computers. It has great IO and very few moving parts aside from a fan.
They are fun to try a bunch of Linux distros. I tried tons of OS on my "old" (2019) Gigabyte Brix with J4105 (almost the same specs as the N95). Windows 11 is not good for those devices. Mine can't even reach his ethernet speed on it. No issue with Win10 or Linux. They also work great for emulation, MAME and old consoles.
Jay,the fact that you don't see a usecase for that lowend machine doesn't mean there aren't any. These things are meant for minimal usecases where other options are too expensive and/or where people otherwise wouldn't have bought a pc. Using this as your daily driver, even as a pure office pc...no, I would get the other one for 50 or 60 dollars more. But if you want to setup a most basic domotics server, or home assistant server, or converting an old beamer into a somewhat useable device for watching a movie outside on your porch/deck, or even using it in an office just for remoting into your virtual desktop, that thing is excellent. For those usecases, if it gets the job done in a somewhat decent fashion it's fine, lowest cost and lowest power consumption then is king. Deploying 200 or 500 of those machines in a callcenter for remoting into your VMs, it makes a hell of a difference if they are 109 or 169 dollar.
Actually we have good use-case for this mini PCs. In industrial manufacturing plant just shove it behind 4K TV to run monitoring software - production plan, truck turns, HR announcements, etc. In corporate environment you need something that can run Up to date OS (Windows 10 support will end in October 2025) and for easy management capable to join company domain. This kind of PC is perfect.
When I was at gigabyte we had those little Compute Stick things doing that. They all ran windows 7 and they ran it terribly, but they could put a slide on a screen and could connect to the local network, and that's all they had to do.
They exist because businesses buy or lease them in bulk for people who need to look at excel spreadsheets and send emails. Once their lease is over or they are EOL, they make their way onto eBay, other marketplaces, or just sold in lots. All you need to do is buy a bunch of old systems for cheap, clean them up and maybe replace the hard drive, put them in a fancy enclosure and slap on some cool name.
I have two of them. One I turned one into a Linux Debian 12 Owncloud server. It only has 4 GB of ram and a N4200. But I connected a multi drive storage bay with 24 TBs of space and it works perfect! The other one I have has AMD 5500U with 16 GBs of Ram and 512 GB space. I connected a 4 TB external drive to it and use it as my Plex Server. It works like a dream. They are just a really solid solution for building servers that manage media. Thanks for doing this video. I was curious about the N95. Looks pretty darn goodfor the price.
First boot can normally be unusually slow because it is setting up and initializing drivers for the first time. Especially if it goes on to do an OS update.
I have a BMAX B3. Intel N5095 with 8gb of ram. Has horrible reviews on amazon but it's been working great for me as a Plex server running Lubuntu as the OS. Opened it up and slapped in a 2tb SSD and I was ready to rock.
@@idan678 I agree with ya. I just chose lubuntu since I'm familiar with the gui. Works great for me. At most 2 streams are coming from it at once. Handles it without a hitch. Most of my video content that's streamed is 1080p.
whats the difference to just hooking up an external hard drive to the tv and play files from there? only to have a nice homescreen with thumbnails and movie information?
Agreed with the fact that they are really aimed at home lab environments. The one that has an eMMC would likely be MUCH snappier as a Linux box than a Windows machine
Super appreciate the streaming gaming pc angle. I’ve been trying to get a solution like that for living room/bedroom for a while and refuse to get a console. Seeing the capabilities of these machine for that task was awesome. Thanks Jay!
These small PCs have a nice use case for being like a garage PC if you’re always referencing manuals and procedures for car, home improvement projects.
A thin client is good for a retro game emulator. I built one for my kids out of some linux box called an iGel I found for $14 on ebay. It's waaay jankier than either of these but does what I need it to.
The one thing I wish all manufacturers of MiniPCs and NUCs would do is maybe increase size a tiny bit (taller) and add proper mounting holes so we could put a super low profile cooler with a 80/120mm fan instead of being forced to use those terrible laptop cooling fans as an only option. Silence from one of these would make them perfect for a lot of situations, but instead we get whiny laptop sounding machines. Would put huge pressure on ITX systems if these supported better cooling.
I have an old Zotac Zbox that I cut the top of the plastic housing out of and mounted a tower cooler on the heatsink. I used a usb powered fan for the tower and it actually runs faster than it used to. I have it connected to an old 65" tv for watching pay-per-view in a totally legal way. It is also used for streaming from my NAS and basic computing.
I've got a N100 and a Ryzen 5560U based ones and even under load can't hear the fans. I would prefer the option to mount a proper 120mm fan, but these machines are not loud because you think they are, some might be but mine aren't.
Mini PC's with AMD 7840HS or higher CPU and 780M integrated graphics. Might not game on ultra settings but will give you some really shocking game performance for the price add to that hardware support for encode and decode AV1, H264 and H265 and you have a very capable home computer that will support light to medium gaming. The ones in this video are good for digital signage or a thin client to RDP into a proper system/server.
0:12 Jay, that's not a thin client, but I understand why you may have thought it was. Thin clients are (typically) used to connect to virtual environments hosted elsewhere, such as in the cloud. It serves only to provide an interface with a few usb ports to connect a keyboard and mouse, one or more (depending on the model) of monitors, and a network port. That's not to say you couldn't use the remote desktop software on a minipc. A thin client won't be able to do much else beyond connecting to a VM.
Jay didn't touch using Linux for a mini homelab for local services, and it's just two really low end units. Some new ryzen units have so much more capability it's crazy. Even for gaming.
I also work at a university and we had these types of mini PC bolted on the back of every TV in class rooms, conference rooms and alike. We had the Dell NUCs. Those thinking were expensive. They worked well.
I replaced my homelab server rack with 3 of the bee mini/bos ones. Saves about 40/month in electric bills and it just works like a dream with proxmox and containers
Be very careful with the type of shit that is installed on Chinese produced electronics. Don't necessarily think they have malware that is gonna be detected by your Windows Defender or what ever anti-malware software you use. In my opinion, if it comes with Windows, reinstall Windows and if possible use the key that came with it. There have been many times Android devices has come with malware preinstalled and also even Gigabyte motherboards has been delivered with tainted BIOS. Nowadays Amazon's products is as trustworthy as Chinese products.... A good use case for these are running a Docker container server from where you stream everything at home. That way you can make your system a lot more secure and efficient.
Another use case is astronomy. People attach these to telescopes to control the mount, a camera, and any other accessories. They load special software to control the equipment and then log into them across a WIFI network.
I have a GMKTek Mini PC running 16GB of RAM and an N100. I honestly don't have anything to use it for yet, but i bought it to replace the Pi 3B+ i was playing with because I permanently deployed that as a PiHole. Its plenty powerful enough to do most anything I ask of it that would be Pi based type work. You can run dockers and such off of it. Mostly a cheap $150 PC to use as a sandbox for trying new stuff out.
Jay, the problem with those NUCs out of the box is. First thing windows likes to do is run its updates. So it appears to take forever and a day for them to start responding as they should. i bought a BMAX NUC for about £100. Sole use was to take with me on holiday to stream stuff (with a HDMI and foldable keyboard and trackpad) while i was in my room. I used it to backup my holiday photos to a USB stick so i didnt have to use roaming data or crappy wifi service when abroad. However the first thing i did with my BMAX NUC was to swap out the NVME SSD with a blank one and put a Win10 Lite build on it. Without all the fluff that Microsoft likes to pack into its OS, the BMAX NUC worked very responsive and did the job it was bought to do. So for me, it forfilled its use. Didnt have the issues i saw you having. So now it just works as a little streaming box in a spare room for guests.
computers are for more then gamming and youtube, shocker I know. i use my mini PC for astrophotography to control my telescope and camera equipment no need for a monitor or keyboard as I remote into it either from my desktop or phone. the PC is mounted to the telescope and weight is a major factor in the equipment I use so a mini PC is a pretty good option.
The good is that it's tiny and clean, but people say it's all about the movement and proper usage. The bad is that it's way too expensive. For instance, for the same amount of dollar, you could build a system that's 100% better than the mini pc counter parts
What system can you build around $100-150 that would be 100% better than a N100 or 3400GE mini PC? I am all for building PC towers for the right use but it is not as simple as you describe it to be. Mini PC and PC towers are intended to satisfy different markets. Kind of like motorcycles vs cars or drones vs planes.
@@Rushil69420 Sure you can, but just second hand. In fact for ~$200, you can readily build a ryzen 5 3600 with rx 580... At least in FB market in my area. Edit: This new mini pc is about $190 + tax = $213.75 and FB don't have any tax.
@@Pilaspilas911 The more expensive of the two that he reviewed just now- the Bosgame B95- is $170 shipped on Amazon right now. (Granted, if you’re not in North America or China the pricing might not be as attractive) But the point stands. I know it’s doable but RAM, a cooler, storage, a motherboard/CPU, and a GPU (if integrated graphics won’t do) for under $200? Unless you find a mostly intact Optiplex and put some work into it, you’ll most likely be cutting more corners than you would just getting a Ryzen 7 Mini PC for ~$220. You’re simply not going to find modern 8 core or comparable performance at that price, and if you do it’s definitely not in that form factor.
@@Rushil69420 That's $170 + tax = $190. I never said anything about small form factor did I? I can build a desktop variant for the same price and you can downgrade or upgrade depending on your budget. And your argument only really applies for LOW END mini pc. My comment is towards general mini pc that includes 7840hs which cost a lot. Just so I can prove my point since I have to spell it out for you... 190 USD = $260 Cad, so here's the build: -Ryzen 5 3600 - $60 Cad -Motherboard and Ram - $90 Cad (b450m and 16 gb ram) -PSU 450W and ATX case - $35 Cad (not the best looking case, but it'll do) -RX 580 - $40 Ca -256 gb ssd - $25 Cad Total: $250 Cad You can find multiple offers like this readily available and the system will crush B95 in any aspects except for small factor case Edit: Bear in mind that these are listed price and I'm pretty sure you can haggle it down further
I recently bought a mini pc with a Ryzen 3750h and Vega 10 graphics. I upgraded the memory to 32GB and the stock Intel Nvme ssd wth my XPG 2 TB Nvme SSD which was in my previous pc. It runs most of my pc games from 5-10 years ago and some emulators fine at 1080p. I bought it because I didn’t want to have a regular pc anymore and I do my gaming on my Xbox series S, Xbox 360 and PS5 for the most part. Congratulations Jay on 4 million subscribers and thanks for the video.
@@orangejishen It is an ATOPNUC R7-3750h from Amazon. I think the manufacturer ATOPNUC has a website with the exact name. It comes with an Intel 512GB SSD, 16GB of memory and comes with Windows 11 Pro. You can upgrade the Nvme to 2TB and 32 GB of ram. An SATA SSD can be installed but I opted to use it externally since it is directly at the top of the memory and too close to the Nvme at least for me. I hope this helps.
@@orangejishen I thought I responded to the question yesterday, somehow it is not here, but I bought the mini-pc on Amazon. The manufacturer is ATOPNUC, model R7-3750H with 16 GB of DDR4 ram and an Intel 512 GB ssd.
I love my blink* (edit: not bmax, oops) minipc that I use for dedicated servers for Games like Palworld, Satisfactory, etc, running in docker containers. Its fantastic.
Not to promote another youtuber here, but ETA Prime reviews these mini pc's, sbc's, and low profile gpu's. He is also really into retro gaming and emulation. Fantastic youtuber that is in more of a niche part of the pc computer.
Yep a lot of companies use these for basic office work and call center work. call centers still use a lot of old software from the 90's especially Debt collecting and banking and these things can run them without using much resources.
Yup. These are basically the modern version of a thin-client PC. They just now finally have enough hardware to be able to run a proper OS locally rather than be solely a remote access machine.
I have one of the mini PCs. I bought it so I could browse the web on my TV. I actually found it to be more useful as an emergency backup. In case something happens and my PC and Laptop are out of commission this will run google suite and allow me to get work done while working on getting my desktop or laptop back up and running. Its also small enough I can keep it in my bugout bag with a flash drive with all my critical documents. All in all, pretty handy to have in a pinch. 🍻
I bought one with a Ryzen 5560U chip, and I don't see much difference doing general desktop usage to my desktop Ryzen 5600. What does tend to take a tad longer is things like installing new software, but you do most of that at the beginning and then not that much anymore. I paid just over US$250 shipped for a 16GB ram and 512GB SSD version. The only time I found it lacking was doing AAA gaming, which isn't surprising.
I would hate to admit this on the street, but, I got one of those Bosgames for streaming my online movie services. I janked mine though. I drilled holes in the sides and cut the top open and put a Be Quiet 120mm fan on it. Wrapped it with carbon vinyl and stuck it to the back of my living room tv. It works pretty good. Wireless mouse and mini-keyboard at the lazy boy. Turned my living room tv into a smart TV. Jank? Yes. Better than paying $3,000 for a new TV for now.
A friend of mine needed a very basic PC for his barber shop so I got him one of these minipcs, mounted it to the back to the monitor, and he’s been using it for the past 5 years. As a office pc these work quite nicely, has enough power to keep Chrome and Spotify open, and that’s what most people need.
To replace my old HP 610 G1 Mini (who was my main home server) i bought the "TRIGKEY S5 Ryzen 7 5700U,32Go DDR4+500Go M.2 " for 320€, definitly a great choice. I have all my VM and everything, it use between 20 and 25 watts, and i still have a lot of cpu and ram available for future projects, it can even run local LLM without to much difficulties (4gb llm run quite fast actually) I would recommand it to anyone looking for a relatively cheap and silent home server
Hey Jay, I’m a 17 year old with some questions on PSU’s, not much info about them online, but my main question is Does Cablemod”Asus” cable kit work universally for all asus type psu such as ROG and TUF, I recently bought a new ROG psu and I’d prefer not having too spend another 50$ on sleeved cables, I don’t have the money too test this psu theory if it blows up my pc haha…
Set mine up as a retro emulation/mid range game device with a 2TB SSD and it's perfect. They are also very portable if you ever wanted to take it over a family/friends house. (Beelink SER5 MAX)
I find these things perfect for computing away from home. Just bring it along with the proper cables, it doesn't consume much space at all, and you can hook it up to the hotel TV when you get THAT ONE email from a coworker while you're on vacation. Sometimes your phone and/or laptop just isn't the right tool for the job.
11:30 you want to find some information and you pick your phone when you literally have a pc with a huge screen, keyboard and mouse right in front of you. Am i too old to understand this lol
we use them in industrial sites for displays of production numbers or alarm messages for operators or as clusters for displaying camera feeds to operators.
The mini PCs are very useful and used everywhere! I see them at the DMV. (Lenovo) Car Dealerships and repair (Lenovo) Many other stores used instead of dedicated POS machines. I bought one for my wife, she just needed it for some work stuff. My daughter needed a computer for school, and I don't have a lot of money lying around, so it gets here school work done. My current and previous server were mini PCs. Mostly because they are running all the time and are low power. Usually in the 6 to 9 volt range. My original server acted as a printer and web development server. My newer laser printer has networking built in, but I still sometimes use my old color inkjet. The newer server, which is now 9 years old, also acts as a Minecraft server. Sure it drops some ticks, but works pretty well most of the time. They definitely have their uses. Heck, my main machine is still rocking an I7-4770k. Programming, graphics editing, video editing, gaming, etc. Yes, I badly need a new computer, but that takes money. Maybe next year when Microsoft ends all support for computers before 2018.
I bought a refurbed tiny client PC solely for the purpose of running my 3D printers in my garage. It's honestly the perfect solution above a raspberry pi and I can remote into it from my office where I do all my slicing.
Jay. I keep seeing ads for the higher end mini pcs like Beelink, Geekom, and minisforum. I would be interested in your opinion on those higher end models. In particlar the ryzen models with 780m graphics.
We use a one of these as a remote-access node for our warehouse. They can remote desktop into it (over a VPN) to access the order system. Its been great. Mounts under the front counter and nobody knows its there.
I got a nice used one kinda like that thick boy for $65 on eBay. I got it just to run media player and store my mp3 collection. I plan on running it into my home theater. Cheap and easy!
I use a Beelink SER5 (5700U, 16gb ram, 1tb nvme) mini pc for home office work, have it vesa mounted to a monitor on my desk next to my gaming pc setup. Is plenty fast for my uses. I just like having a separate setup from my gaming rig to do my work on.
2nd one and above is great stuff for people who do office work or just browse the web. Cheap, functional, runs windows, got some ports and hooks up to a bigger monitor. Quickswap of harddrives and RAM makes mini PCs like this easy for both home-users and companies to either stick in a bigger stick of ram to buy a year of life, or swap drives if one either fails or you need to get rid of the old one for policy reasons For the price, unmatched.
This form factor is perfect for an elderly person who needs a bigger screen than a laptop but doesn't need anything more than basic content consumption and internet usage. The super low end is mostly terrible, but they go on sale quite often so you can grab a more expensive one for a decent price. I also use one similar to the BOSGAME for an Ubuntu file server & Plex Media Server. The N95's sibling the N100 is a darling in the Plex community right now.
They use these in hospitals for the nurses workstation on wheels (WOWs) they connect to a server for electronic medical record, lab, pharmacy, notes, whatever..theyre powerful enough for local use and everything else is offloaded
We actually use them in our plant for connecting to terminal servers. Cheaper than Thin Clients, smaller than thin clients, easier than Pi's. We also are trying some out on web based MES systems, but generally have to buy more powerful ones for that.
They use these in offices where they have a virtual workspace on a server. It is common in many companies to have a small server for the whole office to access and then have these used as access points.
I ended up with a Beelink S12 Pro for $179 on Amazon. It has the Intel 12th Gen N100, 16GB RAM, 500GB SSD, and Win 11 Pro. I have two external USB 18TB HDDs and the PC handles 4K/HDR/DV passthrough on the Plex server installed on it without any issues. It's obviously pretty slow, but it has taken everything I could throw at it with Plex nicely. No real complaints.
I work mobile and have used laptops for years. But over the past couple years I am using the Beelink mini PC models. I bought a 12v lighter socket adapter for it from PWR+ on Amazon and it works great. External monitor is a KYY 15 inch mounted to the dashboard. It's a great monitor for these little guys. Now if I really must be online while away from the vehicle, I use my phone and transfer everything to the PC when I get back. My favorite thing is these can be upgraded really easy. Most laptops these days come with RAM that's soldered to the motherboard so you're stuck with whatever is in it. EDIT: I forgot to say, of course you'll need a ball mouse that doesn't require a mouse pad and a wireless keyboard to use these in a mobile situation but those are easy to find. Get ones that can use Bluetooth so you can keep your USB slots open.
Mini PC is perfect for light office use, all the compute is done on a server somewhere so you just need basic IO to work (bit more, but not much) In practise its a thinclient for people with little to no experience with actual thinclient setup. Works like any normal desktop out of the box and you log into whatever you need like any other desktop. I have looked into "real" thinclients, but for me as a windows guy i find it SO much easier to just let the damn things start windows and log on. They replace all those midi towers that was used for every office station 10-20 years ago, if you dont need a laptop (take it with you for work) you get a minipc
Working in IT, a lot of our clients like these because they're so space efficient and are perfectly competent to just use for RDS onto a server at the main office.
I use my tiny pc to control and monitor my astrophotography rig remotely so I can sleep in my warm bed instead of being outside in the freezing cold. It needed to be small and efficient, because the entire rig runs off of a LifePo4 battery box I designed and I chose one that runs off of simple 12V dc power. No extra bricks, no need for a/c mains power, it has plenty of horsepower for the use case and the perfect small form factor to velcro it right onto my equipment. I can power it up, and then connect to it via WiFi and not have a single cable run. That also means I can take it on the go with me to places with darker skies. There are other dedicated systems using things like the rPi, but most of the best capture software and driver suites are based around Windows platforms, and some of the better rPi based systems lock you into a particular ecosystem of camera equipment or accessories.
I'm pretty sure the main use case for mini PCs is thin client terminal computing in a business setting. At least, that's where I've logged the vast majority of my hours on them. It's a lot cheaper to deploy these to whoever needs access to productivity software, and have them all seeing VMs on the company server, than it is to put honest to dog computers in the hands of all those people. It gets even cheaper if the client isn't running Windows as their local OS. There are lightweight operating systems for machines like these that do little more than provide network functionality. I think those units exist to capitalize on the enthusiast home lab market.
I literally ordered a slightly dated HP Elitedesk G3 today as even a $120 refurb machine out powers a Pi 5. In my case I picked one up for an emulation box. I was debating on the Pi 5 but honestly by the time you get the pi, case, cooling, a sd card, a charging cable, ect you're at at least $140, from what I was seeing most starter kits are closer to $160. I couldn't justify the price for what you get. They're very cool devices and I have a Pi 3 as a Pihole and a Pi 4 running OctoPi for one of my older 3d printers.
I have bought a handful of these type systems. I am the computer guy in the family, so I have upgraded family member's old PC's to these super small form factors. For those just looking to browse and watch videos, I went cheaper with either a Chewi or GMK. For the ones that do light gaming (older titles), I went with Beelink SER systems. I have used the Beelink SER systems as my daily driver for a few years now, with no issues. They are a pretty good bang for the buck
Where I see these mini PCs shine actually is a retail environment. The stations where an employee can look up inventory information for a customer or even hooked up to POS system at a small independent retail or restaurant setting where they dont want to pay for a full register setup and are using a dumb cash drawer and one of those card swipers that more or less plug into their phone. There is a surprising amount of retail support products on amazon for anyone that either can not make orders large enough to work with retail supply venders or just cant pay their prices which sometimes are higher then they really need to be. Though for the home there is little use for them as you can get a cheap laptop for the price of the mini PC + monitor, keyboard, and mouse if you just need something for homework, taxes, and online banking.
i always want to see these mini pc's get compared to something like a raspberry pi. i know these can run windows, but if you are using it for just multimedia, im curious what would work as a better value
AMD mini pcs tend to be better from my testing. I have set up emulation machines, office stations, and mini servers on them. But the n100 and similar intel mini pcs are basically only usable for internet/browser access in a small space. They do however make pcs so small you can put them in your pocket.
these little guys are a price tier below almost all of the AMD ones I've found, and the AMD ones this cheap are either Athlon-based or running an A9-series mobile CPU, so not much of at all faster. Going up to something with a 5600U or even the flagships now with a 7840HS is a whole other level but in roughly the same form factor.
My big brother is blind, and doesn't need a big graphics card, he just need a small computer that can run audio speech synthesis, and an Intel NUC is the perfect solution.
Honesty I gamed on a mini PC for like 6 years before I got a gaming laptop. The mini PC now lives in my office as a fall back PC for appointments. Mini PCs are great as long as you get decent quality to start with. For what you do with them, they are very good.
I was expecting this to be one of those tiny Dell Optiplexes or Lenovo units or Asus Nucs. Those are actually fairly decent for their size and good spec. Decent upgradability and some of them even have usable CPU sockets. They tend to not be any cheaper than a full-size desktop but their perfect for acting as an android box or a minimalist look for someone who just needs to browse the internet. Super common in offices because they're energy and space efficient and they're fast enough for the use-case. These tiny low-spec ones, I'd personally put Linux on them and use them for browser games and cloud-based office work. Basically a chromebook at that point though.
The audience for these things is people running small home servers that are tired of messing with Raspberry Pis.
Exactly my case, haha. And indeed it worked great for that.
I use one for a LINUX system to control a HackRF Software Defined Radio. Actually works well. but it's definitely not a gaming pc.
I think that the bmax might struggle with even the smallest of home servers, maybe just a pihole and not much else. With pi5s being similarly priced though it might be a decent option.
And using them to watch Twitch on your TV where you want to run adblocking. But, more home servers than that, yes.
My old Call Center job had mini pc's They are really good for basic office work.
I use a CNC router in my shop for woodworking. I used to control the CNC with a laptop but that died and I needed a replacement. I purchased a BMAX and mounted it to the back of a monitor to use as my CNC controller. While I wouldn't do any serious computing on it, it does work well as my CNC controller. It has decent WiFi connectivity, which I need for the CNC. After two years of living in my dusty shop it still is performing well. I think computers like these have their place as long as you don't overestimate their capabilities.
As long as you do not install Microsoft crap on them 😁
If it's fanless and all solid-state like the one here, it's going to be pretty hard to kill in a shop environment. It has basically no way to take in dust actively, and that little chip is so low-power that even if it did, there just isn't much heat to get rid of in the first place.
Are you running windows on it or linux?
Yeah, a cheap mini PC is perfect for sticking in a garage environment. I've been considering an old office mini PC off Amazon or going with a cheap Beelink to put on the wall behind the old monitor I have on my small work table. It would be nice to have something basic out there for looking something up quickly or just streaming video while I'm out there doing garden prep, auto work or watching my kids play. I put a fire stick on the monitor last summer and it's nice to throw on a baseball game for a few hours.
@gdn86 Go fanless if you can. Anything that gets at all exposed to a shop environment will connect dust super quickly, and fan bearings tend to just die after a while even if the heatsink isn't already super clogged. With a passive unit you just have to clean it every so often.
I've used those mini PC's a few times in industrial applications, no moving parts and locked up in a cabinet.
They are indeed amazing,
I use a Minisforum UN100C, for home-assistant, it barely uses more than 9W with a [basic underclock]
@@darknessblades wow, nice overkill. Terminal T630 user here (open vpn 230/230mb/s aes 256 cbc) same wattage most of the time. (40 bucks ^^ )
@@sakork95z Mine was roughly 160 euro after discounts, I did add a 2TB WD red SSD to it. so I have enough storage and TBW for years to come.
HASS is known to write a lot of data, killing SD cards, so i went overkill and got a 2TB SSD. so I have enough space that will never get FULL, and/or destroyed due many write-cycles
@@darknessblades Yeah my Plex server uses 10W after I turned off a couple things. Great for a 24/7 PC.
The Bmax is a media-box/thin-client. They are not meant to be used for gaming or anything like that. Even as an office-machine these are plenty of capable but that requires an IT-department or at least somebody with some basic knowledge on how to configure windows.
At our local technical university they had some real thin-clients and switched to these mini-PC thinclients cause those were just marginally more expensive but far easier to setup and manage (and we were not bound to specific software and hardware vendors).
Windows 10 is an absolute pig. I would install a light weight Linux distro to squeeze more performance. The best case use for these is as a server or client for media center or streaming dongle replacement. These chinese use questionable license and not use a clean windows image. I would not use their software. N100 cost around the same and have slightly better performance.
At my work, we've found good use for these as a one-trick pony. These little nodes basically run a kiosk; the user taps their ID on the reader and the node grants them access to a beefier machine that runs a scanner (e.g. an MRI). We can't install the software directly on the bigger computer as it interferes with the computer's main function (and we can't control the vendor's maintenance schedule) so we just get one of these that will lock the computer.
I can tell you a use case for these machines that I have experienced firsthand. My aunt works for a medical billing company, and she works remote, so the company provided her with one of these little mini computers because all that has to do is run a couple of web pages and web interfaces, and drive two monitors. These machines are cheap and perfect for that kind of application.
The n100 chip has been a huge game changer for home servers with its native HEVC hardware encode/decode and highly efficient power usage. You can run an entire Plex stack while it sips power. Connect it to a low power NAS box and it’s a perfect combo
Indeed, its perfect for homeassistant as well. with it being more efficient than a Raspberry PI. and more powerful for less watt
Sadly Minisforum discontinued the UN100C.
or else I would have bought another one for proxmox [pihole and the like]
@@darknessblades I didn't know the UN100C was a thing and sad that I missed it :(
UN100L is an option but it is taller than the UN100C.
i got an awow mini pc off amazon for free had gift cards i won
has 512gb ssd 16gb ddr5 ram and n100 cpu cost me around $145usd that included tax and shipping to new zealand
and its decent at running games at 720p and playing emulators
and its great for 1080p video editing
@@DizY_8you will probably like it better anyways. un100c m.2 is sata and the motherboard is "upside down". To get to the drives you need #1, #0, #00 screwdrivers and remove the motherboard.
un100l looks right side up so you can change the drives without moving the motherboard and the m.2 is nvme. The losses are one ethernet port and 2 usb ports went from 3 to 2. usbc can fix that.
Yes, N100 are insanely good home servers and media servers. It's actually insane that Jay just skipped over all that. He did zero research for this video, and just bought two random computers, and for one of them, he basically just plugged it in, wiggled the mouse and watched a video, and called it a day. If that's not insanely low effort, I don't know what is.
I got one for $280. It has a ryzen 5800h I think with 16 gigs of ram. Has been our Minecraft server for the family for a year and a half. She does her job well 24/7!
I have a Beelink SER5-Max (R7-5800H/32GB RAM/500GB NVME Gen 4 SSD/Vega 8 graphics) I paired it with a portable monitor and use it as a laptop replacement. I have a dislike for laptop keyboards and touchpad.
@@japekto2138Same! I do use a laptop currently but I always have a full size keyboard and mouse plugged into it.
Same here. Me and my friends got sick of renting servers. Plus we had 3 different games we alternate between. And renting 2-3 servers for different games can get expensive. Now we got 1 server that can swap between games.
These are perfect for basic office use and for people that only need laptop power, but don't want to spend laptop money, ruin a battery, and don't want a large desktop!
A good option for POS (Point Of Sales)
I would still use a Dell Optiplex Mini tower for pos. You need something dependable for pos work.
Got my boss to replace one of the PCs in my office with something similar to the second mini PC (one with a 12th Gen processor). I used the VESA mount to mount to the desk. So far, it works very well. Providing it continues to work well, I plan to replace the other two we have.
They tend to be more quiet as well....
@@JeffTiberend I don't consider Dell a dependable computer. My last job was at a law firm. They replaced over a hundred desktops with Dell and it took Dell months to figure out why they wouldn't connect to the network. Then they had to get Microsoft Word to work on them. A conversion that should have taken days wound up taking months. I wouldn't take one for free.
My mom is 76 years old. I got her a mini PC since her previous computer was like 12 years old. I got the N100 processor with 16 GB RAM all for $159. Not a bad deal. All she does is read emails, watch some videos online and that's about it. No need to spend more money. I even mounted it to the back of her monitor. If you need something cheap to use as a media center, then I would consider something like this. Gets the job done.
Just install some Linux on it, so that poor woman does not have to wait for ages to read her mail.
That sounds like a good setup and those N100s have been a great step forward for that segment of the market. Another great option(options are good) are tiny used office PCs(Dell Micro, HP Mini, Lenovo Tiny). They're a great value and I've never had any issues with them due to being used machines. Sometimes, the power supply is a bit extra, and usually storage isn't included. Cost wise, they likely come in a bit lower than the N100, but the difference may be worth the peace of mind of having a new machine and the N100 will consume even less power. So it's definitely a good setup and deal there. As the other comment mentioned, I throw Linux on everything now. My mother took to Linux Mint very well after I set up her computer.
This is exactly what I would buy them for as well.
Nowadays even my parents (late 70s) just use tablets. My father uses an old chromebook despite it's battery died and needs constant power. He has a tablet as well - maybe he uses his in bed or so. But he sticks to his chromebook 🤷♀️
I got me a N100 as a my office PC and a N200 as Home/Plex server.
Upgraded both with 1x16 quality RAM and new quality 2TB M2 and SDD's. Seriously, couldn't be happier with these little devils
You're a good person i can tell. Good on your mum
I bought a lenovo ThinkCentre M93P remanufactured last year before a back surgery that made me bed bound for a month and I use it just for internet surfing and UA-cam and twitch on my TV. I upgraded the 8 gigabytes of RAM to 16 gigabytes of RAM and the processor. And I freaking love the thing!
They're great
Hope you are doing better
Nice, Lenovo computers are in another whole league. And I hope you have fully recovered.
The whole Think series is just built different. I have a ThinkPad T14 and a ThinkCentre M720q on my desk right now. Both are built like bricks and I have yet to hear a fan ramp up in either.
I've got an M93p and an M73(I bought them at the same time). They're almost identical with the M93p having all USB 3.0 ports. They're fantastic machines. For about two years, I was recommending the M93p to a bunch of people. I referred to it as the best value for a computer based on how readily available they were online. I couldn't believe it when I saw them as low as $45 with the power supply a year ago. That's without storage. The fourth-gen chips are still good for general use and will be for a while, especially with Linux. The systems don't consume a lot of power. The reason I no longer refer to them as the best value out there is because sixth and seventh-gen machines have dropped in price more recently.
I also picked up two of the HP mini systems, a sixth-gen and a Ryzen 2400G, and those are nice systems too. The HPs seem to be easier to find lately.
I bought my dad a Chewi Larkbox X for Xmas. I got it in a Black Friday sale for around $169. It does everything he needs it to do: email, internet browsing and Zoom calls. He even has it mounted to the back of his monitor with the kit that came with it. He’s also been tinkering with Linux on it via a USB C drive. I 100% recommend it for anybody in your family over like 70 who you have to help with computers. It has great IO and very few moving parts aside from a fan.
Is Chewi an off brand Chuwi?
@@0LoneTech lol no. I just misspelled it. Maybe I was thinking of Chewy the place where we order dog stuff.
😮
They are fun to try a bunch of Linux distros. I tried tons of OS on my "old" (2019) Gigabyte Brix with J4105 (almost the same specs as the N95). Windows 11 is not good for those devices. Mine can't even reach his ethernet speed on it. No issue with Win10 or Linux.
They also work great for emulation, MAME and old consoles.
And he is STILL ashamed of you.
Mine sits on top of my telescope and provides all the software needed for capturing images and controlling everything. Couldn’t live without it.
Jay,the fact that you don't see a usecase for that lowend machine doesn't mean there aren't any. These things are meant for minimal usecases where other options are too expensive and/or where people otherwise wouldn't have bought a pc. Using this as your daily driver, even as a pure office pc...no, I would get the other one for 50 or 60 dollars more.
But if you want to setup a most basic domotics server, or home assistant server, or converting an old beamer into a somewhat useable device for watching a movie outside on your porch/deck, or even using it in an office just for remoting into your virtual desktop, that thing is excellent. For those usecases, if it gets the job done in a somewhat decent fashion it's fine, lowest cost and lowest power consumption then is king.
Deploying 200 or 500 of those machines in a callcenter for remoting into your VMs, it makes a hell of a difference if they are 109 or 169 dollar.
This video is so low effort, and clearly so under-researched, I wonder if it's made that way on purpose as rage bait for engagement.
Actually we have good use-case for this mini PCs. In industrial manufacturing plant just shove it behind 4K TV to run monitoring software - production plan, truck turns, HR announcements, etc. In corporate environment you need something that can run Up to date OS (Windows 10 support will end in October 2025) and for easy management capable to join company domain. This kind of PC is perfect.
To think of it at work we have bunch fairly similar ones running info TV's.
When I was at gigabyte we had those little Compute Stick things doing that. They all ran windows 7 and they ran it terribly, but they could put a slide on a screen and could connect to the local network, and that's all they had to do.
They exist because businesses buy or lease them in bulk for people who need to look at excel spreadsheets and send emails. Once their lease is over or they are EOL, they make their way onto eBay, other marketplaces, or just sold in lots. All you need to do is buy a bunch of old systems for cheap, clean them up and maybe replace the hard drive, put them in a fancy enclosure and slap on some cool name.
I have two of them. One I turned one into a Linux Debian 12 Owncloud server. It only has 4 GB of ram and a N4200. But I connected a multi drive storage bay with 24 TBs of space and it works perfect! The other one I have has AMD 5500U with 16 GBs of Ram and 512 GB space. I connected a 4 TB external drive to it and use it as my Plex Server. It works like a dream. They are just a really solid solution for building servers that manage media. Thanks for doing this video. I was curious about the N95. Looks pretty darn goodfor the price.
First boot can normally be unusually slow because it is setting up and initializing drivers for the first time. Especially if it goes on to do an OS update.
every time i see jay transform into an admiral i can’t help but laugh my butt off. you guys always have the funniest ad reels!
I crack up every time I see Phil stick his head out and say "yeah"
we need a German ad 😂😂😂😂
I'm think that's a in game avatar or profile pic from the devs of the game in the ad.
Admiral Ackbar has nothing on Jay
😂
14:00 not you streaming at a higher bandwidth than my entire network connection
I have a BMAX B3. Intel N5095 with 8gb of ram. Has horrible reviews on amazon but it's been working great for me as a Plex server running Lubuntu as the OS. Opened it up and slapped in a 2tb SSD and I was ready to rock.
May consider adding another 8gb stick of ram just for giggles since it would be stupid cheap to do so.
Ooooh, yeah!
You're handling it pretty well =)
I'd rather running them on server distro just because the gui take so much ram haha, also with casaos it's pretty easy to manage
@@idan678 I agree with ya. I just chose lubuntu since I'm familiar with the gui. Works great for me. At most 2 streams are coming from it at once. Handles it without a hitch. Most of my video content that's streamed is 1080p.
whats the difference to just hooking up an external hard drive to the tv and play files from there?
only to have a nice homescreen with thumbnails and movie information?
Thank you for showing off how awesome Moonlight / Sunshine is - they need more exposure!
I get how Moonlight can get more exposure, but Sunshine? Rather would need Sunscreen right? 🤣
Agreed with the fact that they are really aimed at home lab environments. The one that has an eMMC would likely be MUCH snappier as a Linux box than a Windows machine
I bought a used Lenovo M73 Tiny with an i3-4130T, 4Gb of RAM, and no storage for $20. A small SSD and 8Gb of RAM later I love my mini server setup!
Super appreciate the streaming gaming pc angle. I’ve been trying to get a solution like that for living room/bedroom for a while and refuse to get a console. Seeing the capabilities of these machine for that task was awesome. Thanks Jay!
It can be used as a +super low budget set top box for free live tv + movie/series piracy + light pc usage + light game emulation
These small PCs have a nice use case for being like a garage PC if you’re always referencing manuals and procedures for car, home improvement projects.
Couldn't agree more! While I have a mechanic grade reader, I'd use something like this to access say Mitchell or AllData info.
i have one bolted to my wall in my garage with a retractable mouse and keyboard, its a great workshop research machine
A thin client is good for a retro game emulator. I built one for my kids out of some linux box called an iGel I found for $14 on ebay. It's waaay jankier than either of these but does what I need it to.
The one thing I wish all manufacturers of MiniPCs and NUCs would do is maybe increase size a tiny bit (taller) and add proper mounting holes so we could put a super low profile cooler with a 80/120mm fan instead of being forced to use those terrible laptop cooling fans as an only option. Silence from one of these would make them perfect for a lot of situations, but instead we get whiny laptop sounding machines. Would put huge pressure on ITX systems if these supported better cooling.
Try BD790i
Maybe in a cube form factor. 😉
I got a USB noctua fan that rests over the intake (no real fan headers on the board), next project is drilling mounting holes through the case.
I have an old Zotac Zbox that I cut the top of the plastic housing out of and mounted a tower cooler on the heatsink. I used a usb powered fan for the tower and it actually runs faster than it used to. I have it connected to an old 65" tv for watching pay-per-view in a totally legal way. It is also used for streaming from my NAS and basic computing.
I've got a N100 and a Ryzen 5560U based ones and even under load can't hear the fans. I would prefer the option to mount a proper 120mm fan, but these machines are not loud because you think they are, some might be but mine aren't.
Mini PC's with AMD 7840HS or higher CPU and 780M integrated graphics. Might not game on ultra settings but will give you some really shocking game performance for the price add to that hardware support for encode and decode AV1, H264 and H265 and you have a very capable home computer that will support light to medium gaming. The ones in this video are good for digital signage or a thin client to RDP into a proper system/server.
I got a funky little itx board with this chip in it on its way. It's for some fun little diy projects, super excited to play with it.
I have one to “borrow” software online
0:12 Jay, that's not a thin client, but I understand why you may have thought it was. Thin clients are (typically) used to connect to virtual environments hosted elsewhere, such as in the cloud. It serves only to provide an interface with a few usb ports to connect a keyboard and mouse, one or more (depending on the model) of monitors, and a network port. That's not to say you couldn't use the remote desktop software on a minipc. A thin client won't be able to do much else beyond connecting to a VM.
Let's go! Minipcs are awesome for what they can do
Jay didn't touch using Linux for a mini homelab for local services, and it's just two really low end units. Some new ryzen units have so much more capability it's crazy. Even for gaming.
Been buying these for a while for our medium sized company. Work very well!
Got my parents to buy a Beelink SER5. Fantastic little system for their needs. Very happy with it.
I got mine with a 5560u cpu, brilliant little thing it is!.
I also work at a university and we had these types of mini PC bolted on the back of every TV in class rooms, conference rooms and alike. We had the Dell NUCs. Those thinking were expensive. They worked well.
I replaced my homelab server rack with 3 of the bee mini/bos ones. Saves about 40/month in electric bills and it just works like a dream with proxmox and containers
Be very careful with the type of shit that is installed on Chinese produced electronics. Don't necessarily think they have malware that is gonna be detected by your Windows Defender or what ever anti-malware software you use. In my opinion, if it comes with Windows, reinstall Windows and if possible use the key that came with it. There have been many times Android devices has come with malware preinstalled and also even Gigabyte motherboards has been delivered with tainted BIOS. Nowadays Amazon's products is as trustworthy as Chinese products....
A good use case for these are running a Docker container server from where you stream everything at home. That way you can make your system a lot more secure and efficient.
Another use case is astronomy. People attach these to telescopes to control the mount, a camera, and any other accessories. They load special software to control the equipment and then log into them across a WIFI network.
I have a GMKTek Mini PC running 16GB of RAM and an N100. I honestly don't have anything to use it for yet, but i bought it to replace the Pi 3B+ i was playing with because I permanently deployed that as a PiHole.
Its plenty powerful enough to do most anything I ask of it that would be Pi based type work. You can run dockers and such off of it. Mostly a cheap $150 PC to use as a sandbox for trying new stuff out.
Jay, the problem with those NUCs out of the box is. First thing windows likes to do is run its updates. So it appears to take forever and a day for them to start responding as they should.
i bought a BMAX NUC for about £100. Sole use was to take with me on holiday to stream stuff (with a HDMI and foldable keyboard and trackpad) while i was in my room. I used it to backup my holiday photos to a USB stick so i didnt have to use roaming data or crappy wifi service when abroad.
However the first thing i did with my BMAX NUC was to swap out the NVME SSD with a blank one and put a Win10 Lite build on it. Without all the fluff that Microsoft likes to pack into its OS, the BMAX NUC worked very responsive and did the job it was bought to do.
So for me, it forfilled its use. Didnt have the issues i saw you having. So now it just works as a little streaming box in a spare room for guests.
computers are for more then gamming and youtube, shocker I know. i use my mini PC for astrophotography to control my telescope and camera equipment no need for a monitor or keyboard as I remote into it either from my desktop or phone. the PC is mounted to the telescope and weight is a major factor in the equipment I use so a mini PC is a pretty good option.
The good is that it's tiny and clean, but people say it's all about the movement and proper usage. The bad is that it's way too expensive. For instance, for the same amount of dollar, you could build a system that's 100% better than the mini pc counter parts
In this price range there’s no alternative or comparable builds. A case and a motherboard would run you more than the entire PC.
What system can you build around $100-150 that would be 100% better than a N100 or 3400GE mini PC? I am all for building PC towers for the right use but it is not as simple as you describe it to be. Mini PC and PC towers are intended to satisfy different markets. Kind of like motorcycles vs cars or drones vs planes.
@@Rushil69420 Sure you can, but just second hand. In fact for ~$200, you can readily build a ryzen 5 3600 with rx 580... At least in FB market in my area.
Edit: This new mini pc is about $190 + tax = $213.75 and FB don't have any tax.
@@Pilaspilas911 The more expensive of the two that he reviewed just now- the Bosgame B95- is $170 shipped on Amazon right now. (Granted, if you’re not in North America or China the pricing might not be as attractive)
But the point stands. I know it’s doable but RAM, a cooler, storage, a motherboard/CPU, and a GPU (if integrated graphics won’t do) for under $200? Unless you find a mostly intact Optiplex and put some work into it, you’ll most likely be cutting more corners than you would just getting a Ryzen 7 Mini PC for ~$220. You’re simply not going to find modern 8 core or comparable performance at that price, and if you do it’s definitely not in that form factor.
@@Rushil69420 That's $170 + tax = $190. I never said anything about small form factor did I? I can build a desktop variant for the same price and you can downgrade or upgrade depending on your budget. And your argument only really applies for LOW END mini pc. My comment is towards general mini pc that includes 7840hs which cost a lot. Just so I can prove my point since I have to spell it out for you... 190 USD = $260 Cad, so here's the build:
-Ryzen 5 3600 - $60 Cad
-Motherboard and Ram - $90 Cad (b450m and 16 gb ram)
-PSU 450W and ATX case - $35 Cad (not the best looking case, but it'll do)
-RX 580 - $40 Ca
-256 gb ssd - $25 Cad
Total: $250 Cad
You can find multiple offers like this readily available and the system will crush B95 in any aspects except for small factor case
Edit: Bear in mind that these are listed price and I'm pretty sure you can haggle it down further
I recently bought a mini pc with a Ryzen 3750h and Vega 10 graphics. I upgraded the memory to 32GB and the stock Intel Nvme ssd wth my XPG 2 TB Nvme SSD which was in my previous pc. It runs most of my pc games from 5-10 years ago and some emulators fine at 1080p. I bought it because I didn’t want to have a regular pc anymore and I do my gaming on my Xbox series S, Xbox 360 and PS5 for the most part. Congratulations Jay on 4 million subscribers and thanks for the video.
What model did you get and where ? if i may ask would love to give my dad a retirement gift and what you are using sounds perfect for his needs.
@@orangejishen It is an ATOPNUC R7-3750h from Amazon. I think the manufacturer ATOPNUC has a website with the exact name. It comes with an Intel 512GB SSD, 16GB of memory and comes with Windows 11 Pro. You can upgrade the Nvme to 2TB and 32 GB of ram. An SATA SSD can be installed but I opted to use it externally since it is directly at the top of the memory and too close to the Nvme at least for me. I hope this helps.
@@orangejishen I thought I responded to the question yesterday, somehow it is not here, but I bought the mini-pc on Amazon. The manufacturer is ATOPNUC, model R7-3750H with 16 GB of DDR4 ram and an Intel 512 GB ssd.
@@orangejishen My comments are getting deleted, I don’t know why, where can I send you a message?
I love my blink* (edit: not bmax, oops) minipc that I use for dedicated servers for Games like Palworld, Satisfactory, etc, running in docker containers. Its fantastic.
Please review more USFF PCs and their wide range of use cases.
12:12 I love to see Jay do video entirely with this voice.
Yes but no please 😭😭😭
Jay you need to talk to wendell from level 1 techs. He reviews minisforum PCs all the time. He's got tons of ideas for those little PCs.✌
Not to promote another youtuber here, but ETA Prime reviews these mini pc's, sbc's, and low profile gpu's. He is also really into retro gaming and emulation. Fantastic youtuber that is in more of a niche part of the pc computer.
Mine is used as a cheap kubernetes cluster for learning and testing
we have so many of mini pc's as the b max at work, runing simple linux terminal client to serv as a terminal for windows rds server for the employee.
Yep a lot of companies use these for basic office work and call center work. call centers still use a lot of old software from the 90's especially Debt collecting and banking and these things can run them without using much resources.
Yup. These are basically the modern version of a thin-client PC. They just now finally have enough hardware to be able to run a proper OS locally rather than be solely a remote access machine.
I have one of the mini PCs. I bought it so I could browse the web on my TV. I actually found it to be more useful as an emergency backup. In case something happens and my PC and Laptop are out of commission this will run google suite and allow me to get work done while working on getting my desktop or laptop back up and running. Its also small enough I can keep it in my bugout bag with a flash drive with all my critical documents. All in all, pretty handy to have in a pinch. 🍻
I would like to see a mini pc with a AMD cpu and what that can offer =D
An AMD mini pc with Batocera is just bliss. Got me out of trying to constantly trying to squeeze the last bit of performance from different Pi builds.
There are a ton of them, some even get Radeon dGPUs like the 6600M, but a lot of the high-end ones now come with the 7840HS or 7735H (rebadged 6800H).
I bought one with a Ryzen 5560U chip, and I don't see much difference doing general desktop usage to my desktop Ryzen 5600. What does tend to take a tad longer is things like installing new software, but you do most of that at the beginning and then not that much anymore. I paid just over US$250 shipped for a 16GB ram and 512GB SSD version. The only time I found it lacking was doing AAA gaming, which isn't surprising.
I would hate to admit this on the street, but, I got one of those Bosgames for streaming my online movie services. I janked mine though. I drilled holes in the sides and cut the top open and put a Be Quiet 120mm fan on it. Wrapped it with carbon vinyl and stuck it to the back of my living room tv. It works pretty good. Wireless mouse and mini-keyboard at the lazy boy. Turned my living room tv into a smart TV. Jank? Yes. Better than paying $3,000 for a new TV for now.
"14th gen CPU, sorry, 12th gen CPU." As everyone tries to determine a difference across the majority of SKUs
they are great for retro gaming using the Batocera OS...
These would run any Linux desktop environment with ease.
Honestly just goes to show how shite windows is imo
That Warships ad still cracks me up every time. "Jaaaaaaaayyyyyyyyy..."
I would love love love it if you reviewed mini pc’s from minisforum and beelink.
Thank's for the video. Try next time new mini pc on Ryzen 7840hx, like "Beelink SER7" or "MINISFORUM UM780"
Jay!! Why not do a blind fold test? See if you can tell the difference between a local game or a streamed game?
A friend of mine needed a very basic PC for his barber shop so I got him one of these minipcs, mounted it to the back to the monitor, and he’s been using it for the past 5 years. As a office pc these work quite nicely, has enough power to keep Chrome and Spotify open, and that’s what most people need.
these are really great for upgrading or moding a one up arcade, or even making a retro game station or pc
I have a Minisforum HX99G. I bought it barebones and put 64GB RAM and 4TB of nvme drives in it. It's pretty good.
These exist because raspberry Pi is being dick from last 3-4 years
There seems to be an elephant in the room...... How do you know it doesn't have hardware based malware?
To replace my old HP 610 G1 Mini (who was my main home server) i bought the "TRIGKEY S5 Ryzen 7 5700U,32Go DDR4+500Go M.2 " for 320€, definitly a great choice.
I have all my VM and everything, it use between 20 and 25 watts, and i still have a lot of cpu and ram available for future projects, it can even run local LLM without to much difficulties (4gb llm run quite fast actually)
I would recommand it to anyone looking for a relatively cheap and silent home server
Hey Jay, I’m a 17 year old with some questions on PSU’s, not much info about them online, but my main question is
Does Cablemod”Asus” cable kit work universally for all asus type psu such as ROG and TUF, I recently bought a new ROG psu and I’d prefer not having too spend another 50$ on sleeved cables, I don’t have the money too test this psu theory if it blows up my pc haha…
Set mine up as a retro emulation/mid range game device with a 2TB SSD and it's perfect. They are also very portable if you ever wanted to take it over a family/friends house. (Beelink SER5 MAX)
I find these things perfect for computing away from home.
Just bring it along with the proper cables, it doesn't consume much space at all, and you can hook it up to the hotel TV when you get THAT ONE email from a coworker while you're on vacation. Sometimes your phone and/or laptop just isn't the right tool for the job.
Ah yes the mini malware boxes
11:30 you want to find some information and you pick your phone when you literally have a pc with a huge screen, keyboard and mouse right in front of you. Am i too old to understand this lol
we use them in industrial sites for displays of production numbers or alarm messages for operators or as clusters for displaying camera feeds to operators.
The mini PCs are very useful and used everywhere!
I see them at the DMV. (Lenovo)
Car Dealerships and repair (Lenovo)
Many other stores used instead of dedicated POS machines.
I bought one for my wife, she just needed it for some work stuff.
My daughter needed a computer for school, and I don't have a lot of money lying around, so it gets here school work done.
My current and previous server were mini PCs. Mostly because they are running all the time and are low power. Usually in the 6 to 9 volt range.
My original server acted as a printer and web development server. My newer laser printer has networking built in, but I still sometimes use my old color inkjet. The newer server, which is now 9 years old, also acts as a Minecraft server. Sure it drops some ticks, but works pretty well most of the time.
They definitely have their uses.
Heck, my main machine is still rocking an I7-4770k. Programming, graphics editing, video editing, gaming, etc. Yes, I badly need a new computer, but that takes money. Maybe next year when Microsoft ends all support for computers before 2018.
I bought a refurbed tiny client PC solely for the purpose of running my 3D printers in my garage. It's honestly the perfect solution above a raspberry pi and I can remote into it from my office where I do all my slicing.
Jay. I keep seeing ads for the higher end mini pcs like Beelink, Geekom, and minisforum. I would be interested in your opinion on those higher end models. In particlar the ryzen models with 780m graphics.
We use a one of these as a remote-access node for our warehouse. They can remote desktop into it (over a VPN) to access the order system. Its been great. Mounts under the front counter and nobody knows its there.
I got a nice used one kinda like that thick boy for $65 on eBay. I got it just to run media player and store my mp3 collection. I plan on running it into my home theater. Cheap and easy!
I use a Beelink SER5 (5700U, 16gb ram, 1tb nvme) mini pc for home office work, have it vesa mounted to a monitor on my desk next to my gaming pc setup. Is plenty fast for my uses. I just like having a separate setup from my gaming rig to do my work on.
2nd one and above is great stuff for people who do office work or just browse the web.
Cheap, functional, runs windows, got some ports and hooks up to a bigger monitor.
Quickswap of harddrives and RAM makes mini PCs like this easy for both home-users and companies to either stick in a bigger stick of ram to buy a year of life, or swap drives if one either fails or you need to get rid of the old one for policy reasons
For the price, unmatched.
This form factor is perfect for an elderly person who needs a bigger screen than a laptop but doesn't need anything more than basic content consumption and internet usage. The super low end is mostly terrible, but they go on sale quite often so you can grab a more expensive one for a decent price. I also use one similar to the BOSGAME for an Ubuntu file server & Plex Media Server. The N95's sibling the N100 is a darling in the Plex community right now.
They use these in hospitals for the nurses workstation on wheels (WOWs) they connect to a server for electronic medical record, lab, pharmacy, notes, whatever..theyre powerful enough for local use and everything else is offloaded
We actually use them in our plant for connecting to terminal servers. Cheaper than Thin Clients, smaller than thin clients, easier than Pi's. We also are trying some out on web based MES systems, but generally have to buy more powerful ones for that.
They use these in offices where they have a virtual workspace on a server. It is common in many companies to have a small server for the whole office to access and then have these used as access points.
I ended up with a Beelink S12 Pro for $179 on Amazon. It has the Intel 12th Gen N100, 16GB RAM, 500GB SSD, and Win 11 Pro. I have two external USB 18TB HDDs and the PC handles 4K/HDR/DV passthrough on the Plex server installed on it without any issues. It's obviously pretty slow, but it has taken everything I could throw at it with Plex nicely. No real complaints.
Hey Jay, good to see you all sparkly again, hope you are feeling better and doing well.
I work mobile and have used laptops for years. But over the past couple years I am using the Beelink mini PC models. I bought a 12v lighter socket adapter for it from PWR+ on Amazon and it works great. External monitor is a KYY 15 inch mounted to the dashboard. It's a great monitor for these little guys. Now if I really must be online while away from the vehicle, I use my phone and transfer everything to the PC when I get back. My favorite thing is these can be upgraded really easy. Most laptops these days come with RAM that's soldered to the motherboard so you're stuck with whatever is in it.
EDIT: I forgot to say, of course you'll need a ball mouse that doesn't require a mouse pad and a wireless keyboard to use these in a mobile situation but those are easy to find. Get ones that can use Bluetooth so you can keep your USB slots open.
Mini PC is perfect for light office use, all the compute is done on a server somewhere so you just need basic IO to work (bit more, but not much)
In practise its a thinclient for people with little to no experience with actual thinclient setup. Works like any normal desktop out of the box and you log into whatever you need like any other desktop.
I have looked into "real" thinclients, but for me as a windows guy i find it SO much easier to just let the damn things start windows and log on.
They replace all those midi towers that was used for every office station 10-20 years ago, if you dont need a laptop (take it with you for work) you get a minipc
Working in IT, a lot of our clients like these because they're so space efficient and are perfectly competent to just use for RDS onto a server at the main office.
I use my tiny pc to control and monitor my astrophotography rig remotely so I can sleep in my warm bed instead of being outside in the freezing cold. It needed to be small and efficient, because the entire rig runs off of a LifePo4 battery box I designed and I chose one that runs off of simple 12V dc power. No extra bricks, no need for a/c mains power, it has plenty of horsepower for the use case and the perfect small form factor to velcro it right onto my equipment. I can power it up, and then connect to it via WiFi and not have a single cable run. That also means I can take it on the go with me to places with darker skies. There are other dedicated systems using things like the rPi, but most of the best capture software and driver suites are based around Windows platforms, and some of the better rPi based systems lock you into a particular ecosystem of camera equipment or accessories.
I'm pretty sure the main use case for mini PCs is thin client terminal computing in a business setting. At least, that's where I've logged the vast majority of my hours on them. It's a lot cheaper to deploy these to whoever needs access to productivity software, and have them all seeing VMs on the company server, than it is to put honest to dog computers in the hands of all those people.
It gets even cheaper if the client isn't running Windows as their local OS. There are lightweight operating systems for machines like these that do little more than provide network functionality.
I think those units exist to capitalize on the enthusiast home lab market.
I literally ordered a slightly dated HP Elitedesk G3 today as even a $120 refurb machine out powers a Pi 5. In my case I picked one up for an emulation box. I was debating on the Pi 5 but honestly by the time you get the pi, case, cooling, a sd card, a charging cable, ect you're at at least $140, from what I was seeing most starter kits are closer to $160. I couldn't justify the price for what you get. They're very cool devices and I have a Pi 3 as a Pihole and a Pi 4 running OctoPi for one of my older 3d printers.
I have bought a handful of these type systems. I am the computer guy in the family, so I have upgraded family member's old PC's to these super small form factors. For those just looking to browse and watch videos, I went cheaper with either a Chewi or GMK. For the ones that do light gaming (older titles), I went with Beelink SER systems. I have used the Beelink SER systems as my daily driver for a few years now, with no issues. They are a pretty good bang for the buck
Where I see these mini PCs shine actually is a retail environment. The stations where an employee can look up inventory information for a customer or even hooked up to POS system at a small independent retail or restaurant setting where they dont want to pay for a full register setup and are using a dumb cash drawer and one of those card swipers that more or less plug into their phone. There is a surprising amount of retail support products on amazon for anyone that either can not make orders large enough to work with retail supply venders or just cant pay their prices which sometimes are higher then they really need to be.
Though for the home there is little use for them as you can get a cheap laptop for the price of the mini PC + monitor, keyboard, and mouse if you just need something for homework, taxes, and online banking.
Love how jay now starts talking about reasonable tech which people actually use
i always want to see these mini pc's get compared to something like a raspberry pi. i know these can run windows, but if you are using it for just multimedia, im curious what would work as a better value
AMD mini pcs tend to be better from my testing. I have set up emulation machines, office stations, and mini servers on them. But the n100 and similar intel mini pcs are basically only usable for internet/browser access in a small space. They do however make pcs so small you can put them in your pocket.
these little guys are a price tier below almost all of the AMD ones I've found, and the AMD ones this cheap are either Athlon-based or running an A9-series mobile CPU, so not much of at all faster. Going up to something with a 5600U or even the flagships now with a 7840HS is a whole other level but in roughly the same form factor.
My big brother is blind, and doesn't need a big graphics card, he just need a small computer that can run audio speech synthesis, and an Intel NUC is the perfect solution.
Honesty I gamed on a mini PC for like 6 years before I got a gaming laptop. The mini PC now lives in my office as a fall back PC for appointments. Mini PCs are great as long as you get decent quality to start with. For what you do with them, they are very good.
I was expecting this to be one of those tiny Dell Optiplexes or Lenovo units or Asus Nucs. Those are actually fairly decent for their size and good spec. Decent upgradability and some of them even have usable CPU sockets. They tend to not be any cheaper than a full-size desktop but their perfect for acting as an android box or a minimalist look for someone who just needs to browse the internet. Super common in offices because they're energy and space efficient and they're fast enough for the use-case.
These tiny low-spec ones, I'd personally put Linux on them and use them for browser games and cloud-based office work. Basically a chromebook at that point though.