@@rcfungames they always seem to know whe important stuff or thoughtful things are going on. Yesterday I had very fiddly things on my Tundra to do and Lis started to scream😒. But I love all if them😊
That would be awesome I would also like to see some wider and deeper dished rims available with some wider tires. But at least there is a pretty good choice from them compared to a lot of others I see out there. Thanks for watching bro and thank you for commenting.
Glad to hear you agree on the foams. I added the brass wheels as well and find that I’m “smearing” under the weight. I’m not seeing optional firmer foams from Injora for 1.0 tires. Which are you using?
It's awesome that they come with such soft foams, but definitely once you get to a certain weight you got to think of something different! Because I live in Portugal it is difficult to order anything else!! But there are some awesome 3D printed inserts from flab RC. But in my case I just use a pool noodle the consistency is very dense and makes for a really good insert! Some you can already buy with a hole in the middle and then just cut down to the right size. It's also a very economical solution as one noodle costs like two or three bucks and you can make about 25 to 30 foam inserts.
@@rcfungames that’s a fun suggestion! I’ll give the pool noodle idea a try. Too bad bead lock wheels are such a PITA to “bolt up”…. I need to buy a proper socket driver for these tiny lug nuts
@@cpetsche just get one of the cheap sets from injora, I've been using them for about 1 year and they never fail me! Nice tight fit and the tips don't seem to wear away! www.injora.com/products/5pcs-0-9-1-27-1-3-1-5-2-0mm-hexagon-screwdriver-hex-screws-wrench-tools
Once again a great video! The slightly larger brass rims are called "1.0" Plus" by Injora, as they are, as you noted, slightly larger. I have four sets of those rims with different tires, and they work super well.
I'm looking at the 1.0 plus six spoke rims and it says that not all of their tires are compatible. I was looking at the 64x24mm swamp stompers. Do you think they will work together
@@UNDEADGERBIL They are compatible with all Injora's 1.0" tires, but not with Traxxa's original tires. It is written in red under the rims on their website.
That's an awesome, bro 💯 I actually can't wait to get these fitted, but I still have to build my trx4m tarantulas 😅 Will choose and and fit some to the super Mario Van 😜 Thanks for watching and commenting 🤜🤛
Hi need your help I installed the brass high clearance links, stainless center drive shaft n upgraded my tires n rims. Now my bronco leans to one side while driving.
Okay bro, I will try my best to help you out 😉 By adding all the extra weight it uses more power to be able to pull off, that means more of the power is going to push the body over due to the fact that it is more difficult to get the wheels to turn. You need to make sure that older wheels are turning freely and not over tightened, also don't forget to try and increase the preload on the rear right shock, with the original shocks they was little plastic shims that were included so that you could adjust the preload on the spring. Fit one or two of them on the rear back that should help a lot. Let me know how that goes if you're still having trouble we'll see what we can come up with.
Awesome Wheels!!! Thks for the share my Friend!!!
I always appreciate your visit thank you very much Antonio.
They are fantastic and once again the quality is not a let down 💯💯💯💯
@@rcfungames You're welcome my Friend!!!
💪🏻🐼🍻🐻👍🏻
Great rims. Thanks for showing. Greetings to your birds. Cockatiels
Thanks bro 👊😉 I appreciate you watching and commenting 🤜🤛
And yes my cockatiels were having a noisy day yesterday!! 😅🤣
@@rcfungames they always seem to know whe important stuff or thoughtful things are going on. Yesterday I had very fiddly things on my Tundra to do and Lis started to scream😒. But I love all if them😊
Super merci 😊
I am glad you liked it bro 🤜🤛
Thank you 😊
Thank you ❤
It's a pleasure!
Thank you for watching and taking the time to leave a comment ✌️😉
I wish they made some scale Ansen Sprint 15x10 scaled to the SCX24 with a big offset. That is my dream wheel!
That would be awesome I would also like to see some wider and deeper dished rims available with some wider tires.
But at least there is a pretty good choice from them compared to a lot of others I see out there.
Thanks for watching bro and thank you for commenting.
Good to see them all side by side.cheers
I'm glad you liked it bro 😉👍thanks for watching and commenting
Very nice. Picked up some myself
They are definitely awesome 💯💯
Thank you for watching and commenting 🤜🤛
Hello,
very nice rims!👍
Greetings seven🖖
Hi Seven 🤜💥🤛
I agree! can't wait to get them fitted 😁
Greetings Ryan 🖖
@@rcfungames 😃
I need a set of them 1.2's =) Nice job on the overview video Ryan.
TTFN
Glad to hear you agree on the foams. I added the brass wheels as well and find that I’m “smearing” under the weight. I’m not seeing optional firmer foams from Injora for 1.0 tires. Which are you using?
It's awesome that they come with such soft foams, but definitely once you get to a certain weight you got to think of something different!
Because I live in Portugal it is difficult to order anything else!!
But there are some awesome 3D printed inserts from flab RC.
But in my case I just use a pool noodle the consistency is very dense and makes for a really good insert!
Some you can already buy with a hole in the middle and then just cut down to the right size.
It's also a very economical solution as one noodle costs like two or three bucks and you can make about 25 to 30 foam inserts.
@@rcfungames that’s a fun suggestion! I’ll give the pool noodle idea a try. Too bad bead lock wheels are such a PITA to “bolt up”…. I need to buy a proper socket driver for these tiny lug nuts
@@cpetsche just get one of the cheap sets from injora, I've been using them for about 1 year and they never fail me! Nice tight fit and the tips don't seem to wear away!
www.injora.com/products/5pcs-0-9-1-27-1-3-1-5-2-0mm-hexagon-screwdriver-hex-screws-wrench-tools
Nice selection! 🔥
Definitely dude 👍 just can't wait to get them fitted on some rigs!!
Really appreciate you watching and commenting buddy 🤜💥🤛
Once again a great video! The slightly larger brass rims are called "1.0" Plus" by Injora, as they are, as you noted, slightly larger. I have four sets of those rims with different tires, and they work super well.
Thank you I appreciate that! And thank you for the info 🤜💥🤛
And I really appreciate you watching and commenting ✌️😉
I'm looking at the 1.0 plus six spoke rims and it says that not all of their tires are compatible. I was looking at the 64x24mm swamp stompers. Do you think they will work together
@UNDEADGERBIL cool, my favourite brass rims from injora! yes I am sure they will fit, I’ve got that combo on my Jeep trx4m injora build.
@@UNDEADGERBIL They are compatible with all Injora's 1.0" tires, but not with Traxxa's original tires. It is written in red under the rims on their website.
good video, i just ordered the w1008 rims and t1005 tires, cant wait for them to arrive.
That's an awesome, bro 💯
I actually can't wait to get these fitted, but I still have to build my trx4m tarantulas 😅
Will choose and and fit some to the super Mario Van 😜
Thanks for watching and commenting 🤜🤛
Hi need your help I installed the brass high clearance links, stainless center drive shaft n upgraded my tires n rims. Now my bronco leans to one side while driving.
There are a lot of play in the joints.
Okay bro, I will try my best to help you out 😉
By adding all the extra weight it uses more power to be able to pull off, that means more of the power is going to push the body over due to the fact that it is more difficult to get the wheels to turn.
You need to make sure that older wheels are turning freely and not over tightened, also don't forget to try and increase the preload on the rear right shock, with the original shocks they was little plastic shims that were included so that you could adjust the preload on the spring.
Fit one or two of them on the rear back that should help a lot.
Let me know how that goes if you're still having trouble we'll see what we can come up with.
@@ricketkm what do you mean there's lots of play?
Play on the ball joints that you fitted from the links?