What size are your tires? Im on a 6” Rough Country lift with 35” but my measurments are 19” and you are at 22 and 22 1/4. My truck is a Ram Rebel which comes stock 1” higher as its the off road package. I want the height you have, truck looks sick!
Getting the vertex coilovers and shocks installed next week. Maybe Ill look into bigger tires as well. Thanks for replying back to my questions, much appreciated! 🤟🍻
So someone told me today that they coming out with the 13 in September…so maybe wait on that. I had no idea or I would have waited. Preciate it bro! Small but noticeable change
When you did the height adjustment was there also room to adjust to lower it a little. I have to get the 4 inch lift for my extended warranty coverage. So i want to lower till warranty is over. Then adjust to full 6 inch in the front then swap rear blocks out then too.
@@KickinItWithQ I have your same Lyft I went with 35 falcon at4w but I rub in my front bumper just like a tiny bit and I was wondering about that if I needed an alignment thank you for responding to me. I watch your videos all the time because we have the same truck and like your personality
@carlossosa6712 thanks man. I appreciate that. Thanks for supporting channel. Yes, if you do a major adjustment with the lift kit, definitely get an alignment
😂😂 that’s what my other friend said LOL but I hate having to use two hands to text or hold my phone on my small phone I can text with one hand. It’s just more practical for me lol
Does your truck have a voltmeter gauge in it ? My 2015 didn't so I just added one. Was a finding a fuse that only came on when I turned the key. When my truck is all done I will show you on your FB page ok.
@@KickinItWithQ nice. I think I’m pushing the limits. I have these on a 17 denali with around 10 inch of lift. Was debating cranking even more but not sure how it’d ride
Don't know if you account for this, but remember if you're squatting any at all you are now aiming your lights higher possibly into other vehicles coming towards you unless you adjust your lights. That and fluid levels now sitting differently? I don't know how much that all affects but just something that came to mind anyway, but I'm no mechanic so what do I know haha
Bro I love your channel, I've had a bmw 335i (twin scroll turbo) for the past 3 years so all I've been doing is working on that but now since I graduated I am planning to buy a 2015+ F-150 platinum for a daily since I'll be driving far to and from work plus I need a bed for my moto bike. You're vids are great to watch to see what imma wanna do to my truck once I get one
Hey Q, Tires still wearing evenly after the adjustment? I love the ridge grapplers too. I want to drop my front a 1/2” but I just got an alignment last week haha, hoping 1/2 won’t effect my fresh alignment enough to matter 😬
Yeah, they are still wearing evenly. Plus I always get my alarm at done twice a year. Also, since I only went up a little bit, I didn’t have to get an alignment after this.
Bro I almost went back to an iPhone just cause they went back to the 4s shape, but I'm stuck with Galaxy s21 with the super cameras lmfao. IPhone details are so much better though, look real other than than my phone.... wish I could lift my truck though. It's hard to do an F150 cause most of us look the same out here when we lift. You got the best looking F150 cause it looks so much different than everyone else's, but you took the time an that's why it's looking right. Lol I'm a keep my stock look an get a 250 to lift! My ish is just plain! Man Red too Sexy out there! I dig it fasho fasho.
Preciate you bro! Yeah man I was tram Android for every. Only got iPhone for editing honestly. Ayee that f250 is what I want to man. They look soo clean lifted. I appreciate you watching and the support boss
Man, that looks SOOO good under the wheel well. I wish I could justify getting some...but I want 'em just for the bling lol My brother had a set on his red Silverado and he had nothing but trouble with em. I did a 2" level on mine with 33's but it still has a rake to it and it drives me crazy. Good to finally meet you at C&C....told you we'd cross paths lol My kids (and usually a couple of their friends) and I try to make all of the C&C. They're friends with that kid who has the blue Bugatti and the other bad @ss supercars.
@@KickinItWithQ You see that black Mini that kept passing through?! And the Camaro that sounded like a d@mn gunshot backfire?! I'll talk to the kids and see what they come up with.
Update Q! Man you s*** is up there! Using same method my truck 20.5 front and 20 in the rear with RC Coilovers. I thought I was sitting high. I am level or a lil higher than some new F250's stock. I have 35's tho. Didn't know it be that much difference with the tire squat but it is. But I did gain at least 3 inches from my last setup. Watch out boy I'm a coming for ya, Lol!! Fyi I am nose high too, love that look!!
Hey are these coilovers adjustable regardless of the truck you have ? I asked rough country and they said they are not adjustable. I have a 2016 tacoma and im thinking of buying these for my truck . On their website it shows threads on the strut so im guessing the person i asked just didnt know what they were they were saying
@@agustinherrera5600 yea I definitely call again but they ride very smooth. I did another video where bds owner drove it. We compared both kits. I’ll drop link or go to my recent videos. It was uploaded in December
Hey Q new to your channel but been watching some of your videos and I seen when you really damaged your truck when you went off road. Did you get the paint re done? Also, are your rims new? I know you messed them up. But she looks good man. Mine is close but don't have a lift....yet lol
Thanks man! Glad you enjoy the videos! No the hood still scratched actually 😂. Idk when/if I’m going to fix. Yes I got new wheels and tires few months ago. If you go few videos back you’ll see the reveal. Hey you’ll get that lift one day boss!
I got the 2.0 fox resviors in the back but the front I’m thinking fox2.0s as well because the RC ones only last 45k and then you have to buy another one. Idk if I’d wanna do that again. You know?
@@KickinItWithQ what have you heard about reservoirs lasting, i seen on f150 forums saying 45-50k? The foxs are 700 more but I know you can refill them.
@@KickinItWithQ I keep hearing it so I bought the BDS control arms and the fox 2.5 resviors in the front. I’ll make a video and let you know how those are. It’s just the fact you can rebuild them and RCs you can’t.
@@KickinItWithQ yeah I have some fab tech coil overs on my F150 and I always wondered if they would lift it up in the front more. Thank god for your video
I had no idea you could do this with the Vortex coils. Makes me want them now! 😫 I was gonna do a lifted strut with a level kit on top but a lot of people tell me it will not work right. Have u ever heard of this before?
@@KickinItWithQ if u were to build your truck from the ground up would u go higher off the bat? I'm debating on 8" lift with 37s or a 6" with 35s.. I own a F150 xlt also! Only thing I'm having trouble with is with a 6" lift it seems more functional as a daily driver.. 8" seems good but might just be more trouble later . 🤔
Looks better!! I hate a rake, I think level to a 1" squat is perfect. I bet your closer to 7.5" of lift, if I new your exact rear block size I could tell you for sure.
@@KickinItWithQ Most 6" spacer lifts come with a 4" block and 6" spacer which gives you a 6" lift because of factory rake. When I pulled my 6" spacer lift off and put vertex coiloves on with a 1.5" stacked level, I had to replace my 4" block with a 5" block and a 1" lift shackle and I still have 1" of squat which means I'm at 9" in front and 6" in rear. Everyone I've talked to that has put vertex coilovers on were 7.5" of lift right out the box and the same thing happened to me. So if you have a 5" block and 7.5" front lift that would put you exactly level because of 2.5" factory rake. Your truck looks bigger than 6" plus your clearing those 37s. You should join some of the fb groups so more people could find out about your channel, because you have good content.
@@philchristmas4071 Preciate you breaking that down bro! I’m definitely still new to this but that makes sense. Man I’m in the groups but it’s so negative so I rarely post but you right might go drop this link now lol
@@KickinItWithQ Man ain't that the truth!! Actually I think you did a video on the truck scene. I'm also part of the motorcycle and mustang scene and it's nothing but love, people damn near break their arm to give you a thumbs up, but in the truck world nothing but hate and jealous punks for sure. Anyway it's cool because your subscribers can interact with you on FB groups better and show pics.
Q, why are you always wearing black mane. You’re in Texas, got get some white big dawg. I’m in Ga by way of Fla. gotta stay away from those dark colors.
Man, got RED sitting right!!! Now I need to get all of mine checked. I measured the same way you did, so now I have to go back and re-measure from the steps. Appreciate all the work you put in to getting video content out also.
The Vertex manual says to use a strut compressor tool to compress the spring before making adjustments. You can see your spring getting twisted while that guy is rotating the collar because of the spring tension against it. I think your coilovers are fine, but it's not good on the springs to do that.
was it really THAT big of a difference when you lowered it, i kinda like mine high
Do you tow with these vertex shocks? If so what settings do you use?
I do not tow but I’d think stiffer would be better when towing
What size are your tires? Im on a 6” Rough Country lift with 35” but my measurments are 19” and you are at 22 and 22 1/4. My truck is a Ram Rebel which comes stock 1” higher as its the off road package. I want the height you have, truck looks sick!
@douglashardy177 my tires are 37x13.5
Getting the vertex coilovers and shocks installed next week. Maybe Ill look into bigger tires as well. Thanks for replying back to my questions, much appreciated! 🤟🍻
@@douglashardy177 no problem bro I appreciate you tuning in and checking out the video
Yes sirrrrrr!!! Got my F150 because of you a month ago. Just got it lifted now :D
Ayyee! Congrats bro!! I appreciate you supporting the channel
Do you have to jack it up or can it be done without a jack
What’s good Q, what do you have yours set at?
What’s good! I have mine set at 3
Ok, I love your truck mf clean. I just bought the RC Vertex for my Silverado just tryna figure it out.
Nice! Definitely try them at every setting man which is what I did and I settled on three
I appreciate it.
Tuned in!!!
Man I was jus looking at the iPhone 12 the camera is insane!!!
Looks good man, I could tell the difference didn’t think I would be able to notice
So someone told me today that they coming out with the 13 in September…so maybe wait on that. I had no idea or I would have waited. Preciate it bro! Small but noticeable change
When you did the height adjustment was there also room to adjust to lower it a little.
I have to get the 4 inch lift for my extended warranty coverage. So i want to lower till warranty is over. Then adjust to full 6 inch in the front then swap rear blocks out then too.
Alway a big fan of your video fam
How much psi on your tires ?
I usually run 40
After making the ride height adjustments, did the ride quality change?
No because I didn’t make you big of an adjustment
I like the set up with nose higher .also
Yea I want to go little higher
Omg thank you for this.. I was mad at rough country because my front end sits lower than the rear. Now I know what to do 💪🏽
💪🏾💪🏾
So does this make the truck technically have a 7.5” lift? Not a 6” anymore?
Ummm probably like 6.5-7
Bro, u got a 6 inch lift? Idk why but mine looks way lower in the rear. Yours looks taller. Maybe cuz I have 17 inch wheels on 35s? 🤔
Maybe not sure but yea it have 6 in lift
Did you get a alinment
Since we didn’t lift it that high I did not get an alignment
@@KickinItWithQ I have your same Lyft I went with 35 falcon at4w but I rub in my front bumper just like a tiny bit and I was wondering about that if I needed an alignment thank you for responding to me. I watch your videos all the time because we have the same truck and like your personality
@carlossosa6712 thanks man. I appreciate that. Thanks for supporting channel. Yes, if you do a major adjustment with the lift kit, definitely get an alignment
This guy says he likes the small phone?!! Dude your hands make the 12 pro look like a 12 mini 🤣
😂😂 that’s what my other friend said LOL but I hate having to use two hands to text or hold my phone on my small phone I can text with one hand. It’s just more practical for me lol
Alright superstar!!! I see ya shining bruh! 🏆
Preciate you my guy 💪🏾💯
Do you need to get an alignment after this?
I did not get one. Seemed to ride perfectly fine.
I didn’t do a huge major adjustment
Does your truck have a voltmeter gauge in it ? My 2015 didn't so I just added one. Was a finding a fuse that only came on when I turned the key. When my truck is all done I will show you on your FB page ok.
Nah It doesn’t have one bro
@@KickinItWithQ Just drooped off my 2015 for the BDs 6 inch lift . Will be ready in a few day !
@@Mike-bb1li nice!!! Congrats man! 💪🏾
Im from dallas where can i take mine?
You can hit up this guy
So in theory could these be cranked to be above 7.5 inch? Even If they’re 6-7.5
From what I’ve been told yes I personally just have not done it
@@KickinItWithQ nice. I think I’m pushing the limits. I have these on a 17 denali with around 10 inch of lift. Was debating cranking even more but not sure how it’d ride
Definitely going to stiffen the ride
Cool !
Thanks bro! 💯
Good stuff
Preciate you bro 💯🤝
did you get an alignment after ?
Since we didn’t adjust much I did not
Don't know if you account for this, but remember if you're squatting any at all you are now aiming your lights higher possibly into other vehicles coming towards you unless you adjust your lights. That and fluid levels now sitting differently? I don't know how much that all affects but just something that came to mind anyway, but I'm no mechanic so what do I know haha
Good to Think about because I definitely didn’t lol. Preciate you sharing bro
Man , lookin great bro. Can’t beat that look man!!!!
Thanks my guy! I appreciate it. Definitely looks a lot better . Thanks for watching!
What’s the tool name
It’s on rough country website called vortex coilovers adjusting wrench
Looks like NY football Giants blue my man. Lol
😂 that’s a def no go lol. Thanks for watching man
Just got me a set of rough country vertex 2018 GMC might have to go up to your boy shop and get them leveled
Definitely knows what he’s doing!
So if I get coil overs I can get the most out a lift… I’m currently on a Zone 6’ lift kit 4wd
Yes but the higher you raise it the stiffer the ride will be because the spring will be very compressed
How to ride? Cause u change the preload?
It rides a little stiffer but not bad
Bro I love your channel, I've had a bmw 335i (twin scroll turbo) for the past 3 years so all I've been doing is working on that but now since I graduated I am planning to buy a 2015+ F-150 platinum for a daily since I'll be driving far to and from work plus I need a bed for my moto bike. You're vids are great to watch to see what imma wanna do to my truck once I get one
Nice man ! Glad you enjoyed the channel and I definitely appreciate you watching
The title had me afraid 😂 but it looks good man
😂😂 I was just teasing lol. Preciate it man!
Im running a regular 6 inch RC lift. Do I have to upgrade to the vertex coilover to adjust my height like this?
Yep You would
When are you getting tow mirrors?
I don’t prefer the tow mirrors on f150
@@KickinItWithQ I feel that🤙
@@first-nn8it yea just a preference thing
@@KickinItWithQ whats next?!
@@first-nn8it not sure man working on some life stuff at the moment
That’s awesome! I love my iPhone 12pro max. I also have the blue phone too.
Cowboys blue baby 😂
Ay I love the truck brother. What % of tint you got? I like how dark it is
Man long story but basically 20 over 30
@@KickinItWithQ ok thank you I’ll probably do that to mine too it’s just to light it needs to be darker
Hey Q, Tires still wearing evenly after the adjustment? I love the ridge grapplers too. I want to drop my front a 1/2” but I just got an alignment last week haha, hoping 1/2 won’t effect my fresh alignment enough to matter 😬
Yeah, they are still wearing evenly. Plus I always get my alarm at done twice a year. Also, since I only went up a little bit, I didn’t have to get an alignment after this.
Just go back and tell them it’s tracking funny after it settled. Ask them to check and see if any thing moved.
Can’t wait to install mine they are sitting in the box waiting 😂
I know how that goes. I sometime have parts sitting for 4 to 6 months before I put them in. Lol.
It looks great. That small tweak made a huge difference.
Yea man crazy! It looks really good rolling down road now. Definitely looks taller too
Which vortex coilovers did you get?
Rough country
Bro I almost went back to an iPhone just cause they went back to the 4s shape, but I'm stuck with Galaxy s21 with the super cameras lmfao. IPhone details are so much better though, look real other than than my phone.... wish I could lift my truck though. It's hard to do an F150 cause most of us look the same out here when we lift. You got the best looking F150 cause it looks so much different than everyone else's, but you took the time an that's why it's looking right. Lol I'm a keep my stock look an get a 250 to lift! My ish is just plain! Man Red too Sexy out there! I dig it fasho fasho.
Preciate you bro! Yeah man I was tram Android for every. Only got iPhone for editing honestly. Ayee that f250 is what I want to man. They look soo clean lifted. I appreciate you watching and the support boss
John truck fire
I know bro! We been trying to link up to feature hill on the channel. Time just always off
Man, that looks SOOO good under the wheel well. I wish I could justify getting some...but I want 'em just for the bling lol My brother had a set on his red Silverado and he had nothing but trouble with em. I did a 2" level on mine with 33's but it still has a rake to it and it drives me crazy. Good to finally meet you at C&C....told you we'd cross paths lol My kids (and usually a couple of their friends) and I try to make all of the C&C. They're friends with that kid who has the blue Bugatti and the other bad @ss supercars.
Heyyyyy what’s sup man! Nice to meet you too. You actually going to be in the video! lol. Oh that’s dope need to get him on the channel lol
@@KickinItWithQ You see that black Mini that kept passing through?! And the Camaro that sounded like a d@mn gunshot backfire?! I'll talk to the kids and see what they come up with.
@@jamr0214 yeaaa I think I got the mini revving at the light
Looks good homie 🔥🔥🔥
Preciate that bro ! Thanks for watching
Great video! Yeah boy! I will be measuring mine this weekend, lol 😉
Thanks bro! Preciate you watching
Update Q! Man you s*** is up there! Using same method my truck 20.5 front and 20 in the rear with RC Coilovers. I thought I was sitting high. I am level or a lil higher than some new F250's stock. I have 35's tho. Didn't know it be that much difference with the tire squat but it is. But I did gain at least 3 inches from my last setup. Watch out boy I'm a coming for ya, Lol!! Fyi I am nose high too, love that look!!
@@ericrhoton4196 haha nice my guy! Go head and make it happen captain
Lol....
Nice! Looks on point now.
I know! Small adjustment but big difference
So does raising effect the alignment and stuff ?
Depends. Big adjustments yes small like I did no
@@KickinItWithQ so like an inch or so I would be considered big ?
Nah I did a inch And it’s fine
@@KickinItWithQ thank you sir ! Prob watched this same video about 13 times this week ahah
Haha just make sure you hit that thumbs up 👍
Hello Q, how many treads did go up for your 1/2" lift ?
Not but he counted how man was showing in the video. Thing 13 was showing
Hey are these coilovers adjustable regardless of the truck you have ? I asked rough country and they said they are not adjustable. I have a 2016 tacoma and im thinking of buying these for my truck . On their website it shows threads on the strut so im guessing the person i asked just didnt know what they were they were saying
Interesting..maybe Toyota is different design than the fords..
@@KickinItWithQ ill have to call again and make sure . But how do they ride ?
@@agustinherrera5600 yea I definitely call again but they ride very smooth. I did another video where bds owner drove it. We compared both kits. I’ll drop link or go to my recent videos. It was uploaded in December
@@agustinherrera5600 ua-cam.com/video/0IUMWEYw_DY/v-deo.html
@@KickinItWithQ alright ill check it out . Thanx
Truck looks so good, Q! You should already have a 4 inch block in the back unless RC uses a 5in rear block. Just FYI! Loving the content, man.
Preciate it man! Another guy said they use 4 or 6 but Ive never measured. But I appreciate you running in boss!
What’s your wheel measurements? They look mint👌🏼
Thanks bro! 24x12
How much can they adjust up and down ? Is it 1 to 2 inches
No like 7-9in I heard Up front
I just install mines today and for some reason it’s 2 inches higher …too high for me I’m just making sure I can adjust them 2 inches lower
Possibly depends on what they are set at
Hey Q new to your channel but been watching some of your videos and I seen when you really damaged your truck when you went off road. Did you get the paint re done? Also, are your rims new? I know you messed them up. But she looks good man. Mine is close but don't have a lift....yet lol
Thanks man! Glad you enjoy the videos! No the hood still scratched actually 😂. Idk when/if I’m going to fix. Yes I got new wheels and tires few months ago. If you go few videos back you’ll see the reveal. Hey you’ll get that lift one day boss!
I got the 2.0 fox resviors in the back but the front I’m thinking fox2.0s as well because the RC ones only last 45k and then you have to buy another one. Idk if I’d wanna do that again. You know?
I haven’t heard of that but if true I do know they can’t be rebuilt so yea you’d have to buy new ones
@@KickinItWithQ what have you heard about reservoirs lasting, i seen on f150 forums saying 45-50k? The foxs are 700 more but I know you can refill them.
@@Christopher012 I actually haven’t heard anything about that bro this is the first time
@@KickinItWithQ I keep hearing it so I bought the BDS control arms and the fox 2.5 resviors in the front. I’ll make a video and let you know how those are. It’s just the fact you can rebuild them and RCs you can’t.
@@KickinItWithQ aye I finally finished it and posted it!
RC told me I will only get .05 inches up or down
Looks good 🤝 but you knew dat already
Lol! I appreciate that bro! Thanks for watching!
Do you need to adjust the headlights after doing that?
Umm probably. I didn’t but definitely could
Red pops more in the sun with the gopro. It's Gopro FTW for me!
Haha yea color was better on the Gopro
How many extra inches does the vertex coilover kit offer?
Man I’m not sure but I hear you can stretch it to line 9in
whistlindiesel might buy your truck if you do
the iPhone makes red look so much better and cleaner
Lol if I do what? I do see him by other people trucks what can I do to make him buy mine LOL
@@KickinItWithQ You also get a free shoutout 👀
Don't do it to red tho get a new truck and name it white or something.. Anything but red
Lol why not?
@@KickinItWithQ Red is one of the cleanest trucks out there or maybe the cleanest-
I appreciate that bro 💯🤝
GoPro still supreme.
Yea the gopro good little camera man. If they can improve the night time look it’d be dope.
I had no idea these adjustable coil overs can lift and lower the truck more
Yes sirr they can!! That’s what’s so great about them
@@KickinItWithQ yeah I have some fab tech coil overs on my F150 and I always wondered if they would lift it up in the front more. Thank god for your video
Glad it helped man!
I'm with you Q, just a small bit of squat looks good. What's the next upgrade?
Agreed! Umm not sure yet man. I’m pretty busy with some life stuff at the moment.
@@KickinItWithQ heard that.
You are a boss if you edit videos on your phone. 🔥 So making adjustments doesn't mess up the alinement?
I didn’t make a major change so my alignment is fine and didn’t need adjustment. Yea bro all off the phone man
I hope somebody fixes that old bronco up
I know such a beauty
These vertex are 10x better ride than the stock lift kit v3 and front coilovers
I agree bro definitely worth it
If you had a real phone (android) you can have a whole terabyte of storage. 🤣🤣🤣🤣🤣🤣
😂😂 I was android until 3 years ago. Buy android has always been ahead of iPhones. iPhone literally copies everything android does
@@KickinItWithQ they both copy each other. IPhone was the first then android came and eventually surpassed iPhone. Now its pretty even.
I had no idea you could do this with the Vortex coils. Makes me want them now! 😫
I was gonna do a lifted strut with a level kit on top but a lot of people tell me it will not work right. Have u ever heard of this before?
I’ve heard it done before a few guys I know run that. You just Gotta go to the right people who know what they’re doing
@@KickinItWithQ if u were to build your truck from the ground up would u go higher off the bat? I'm debating on 8" lift with 37s or a 6" with 35s.. I own a F150 xlt also!
Only thing I'm having trouble with is with a 6" lift it seems more functional as a daily driver.. 8" seems good but might just be more trouble later . 🤔
Yea 6 def more practical but I think I would go 7-9in. They make them adjustable now a days
I cheated I saw the GoPro shadow 😂
😂😂 I. Was hoping no one caught that
Looks better!! I hate a rake, I think level to a 1" squat is perfect. I bet your closer to 7.5" of lift, if I new your exact rear block size I could tell you for sure.
Think 5 in block….i could be wrong
@@KickinItWithQ Most 6" spacer lifts come with a 4" block and 6" spacer which gives you a 6" lift because of factory rake. When I pulled my 6" spacer lift off and put vertex coiloves on with a 1.5" stacked level, I had to replace my 4" block with a 5" block and a 1" lift shackle and I still have 1" of squat which means I'm at 9" in front and 6" in rear. Everyone I've talked to that has put vertex coilovers on were 7.5" of lift right out the box and the same thing happened to me. So if you have a 5" block and 7.5" front lift that would put you exactly level because of 2.5" factory rake. Your truck looks bigger than 6" plus your clearing those 37s. You should join some of the fb groups so more people could find out about your channel, because you have good content.
@@philchristmas4071 Preciate you breaking that down bro! I’m definitely still new to this but that makes sense. Man I’m in the groups but it’s so negative so I rarely post but you right might go drop this link now lol
@@KickinItWithQ Man ain't that the truth!! Actually I think you did a video on the truck scene. I'm also part of the motorcycle and mustang scene and it's nothing but love, people damn near break their arm to give you a thumbs up, but in the truck world nothing but hate and jealous punks for sure. Anyway it's cool because your subscribers can interact with you on FB groups better and show pics.
I know I don’t understand why but I posted in the group so we’ll see how it goes
Q, why are you always wearing black mane. You’re in Texas, got get some white big dawg. I’m in Ga by way of Fla. gotta stay away from those dark colors.
😂😂. Love wearing black man lol. You sound Like my wife
Squatted trucks 🤦♂️
Haha! It has its own lane
Man, got RED sitting right!!! Now I need to get all of mine checked. I measured the same way you did, so now I have to go back and re-measure from the steps. Appreciate all the work you put in to getting video content out also.
Yea man I figured that part would definitely help y’all out that’s why I asked. Preciate you watching bro!
The Vertex manual says to use a strut compressor tool to compress the spring before making adjustments. You can see your spring getting twisted while that guy is rotating the collar because of the spring tension against it. I think your coilovers are fine, but it's not good on the springs to do that.
Thanks for sharing that information bro! I had no idea