Thank you so much for the video, once you complete the Mainsail installation and edit the wpa_supplicant.conf, do you have to supply 24VDC for CM4 with emmc to get the wi-fi? The CB1 with emmc the wi-fi worked with the 5VDC USB when I installed klipper and mainsail.t
I connected the USB to my computer then opened rpi but it didn't create a new hard drive. I see you connect HDMI to the board, where is the rest connected?
Hey i followed steps and run RPiboot but it stuck at "Waiting for BCM2835/6/7/2711/2712..." i was not able to find any solution for this. even i tried different CM4 but same problem. can you suggest me a solution?
I'm also learning how to program my cm4 after having multiple issues with the cb1 and cb2. So far, its important to power the board with a psu as usb 5v seems to be underpowered for what the CM4 wants to see to function properly. I also had to leave my board plugged in and flip the little switch(the one just below the usb-c port) to the right. Good luck getting your CM4 running! I'm ready to get mailsail loaded and get back to where I was before my cb2 crapped out on me.
Hello, Thank you for the tutorials! Why did you copy from the mainsail.cfg only from #Usage: SET_PAUSE... to [vitrual_sdcard]? Why not copy all the text from the file? You said that copy only this for now.
Hi Ed, on your discord when i asked if i need to flash the board's mcu after installing mainsail you said yes. I was using the cb1 emmc. Is it not needed on the cm4?
Not sure what you mean by number? There's a Discord in link in Description. General chat is where either myself or someone else can answer your questions.
do you have anything on getting CanBus to work on the M8p with the CM4?
Thank you so much for the video, once you complete the Mainsail installation and edit the wpa_supplicant.conf, do you have to supply 24VDC for CM4 with emmc to get the wi-fi? The CB1 with emmc the wi-fi worked with the 5VDC USB when I installed klipper and mainsail.t
I connected the USB to my computer then opened rpi but it didn't create a new hard drive. I see you connect HDMI to the board, where is the rest connected?
Hey i followed steps and run RPiboot but it stuck at "Waiting for BCM2835/6/7/2711/2712..." i was not able to find any solution for this. even i tried different CM4 but same problem. can you suggest me a solution?
I'm also learning how to program my cm4 after having multiple issues with the cb1 and cb2. So far, its important to power the board with a psu as usb 5v seems to be underpowered for what the CM4 wants to see to function properly. I also had to leave my board plugged in and flip the little switch(the one just below the usb-c port) to the right.
Good luck getting your CM4 running! I'm ready to get mailsail loaded and get back to where I was before my cb2 crapped out on me.
Muito obrigado pelo vídeo, muito obrigado fiz tudo pelo Cb1 EMMC funcionou certinho e ja estou imprimindo ,
Estou usando ENDER3 V2
parabéns e obrigado.
Hello, Thank you for the tutorials! Why did you copy from the mainsail.cfg only from #Usage: SET_PAUSE... to [vitrual_sdcard]? Why not copy all the text from the file? You said that copy only this for now.
Even more, why not simply include mainsail.cfg to the printer.cfg file:
[include mainsail.cfg]
Hi Ed, on your discord when i asked if i need to flash the board's mcu after installing mainsail you said yes. I was using the cb1 emmc. Is it not needed on the cm4?
You'll need to clarify conversation as I have about 200 a week.
Hi Ed. The process should be same for m8p v1 right?
Wanted to know the same.
Hello I have one doubt for MKS board Can you give your number I want to clear this plea
Not sure what you mean by number? There's a Discord in link in Description. General chat is where either myself or someone else can answer your questions.