The tip at 9:00 about the small sliver cuts and where you locate the small pieces is sooo good. Esp for a 100% professional finish. I hate small cuts. Esp on wall caps. I see a 1 inch piece of cap on a wall and lose my mind...lol Make two bigger pieces and lose them in the wall vs a cut that looks like bad planning. Good stuff brother!
I own a lawn care and landscaping company and want to get into hardscaping. I just discovered you today and have already binged a few hours of your videos. It’s very helpful and it feels like I’m with you learning hands on. Most other youtubers just teach you the basics or just have the camera up and have it on a time lapse whereas you teach us all the details and techniques and the small little things that will help a lot
That's awesome, I appreciate the feedback! That was my main goal when starting the channel, to help others who really want to learn the trade. I was there myself years ago... Spent a lot of time looking on UA-cam to learn hardscaping and there was not much to offer... So I'm glad to hear from people like you that the videos are helpful. God bless and good luck in your future! ✌
I honestly feel like I should be paying you for all your detailed explanation and lessons. Keep up the good work. Subscribers are coming so be patient.
The pergola was pretty cool man. The customer bought it and we assembled it for him. It is just a pre made one that rests on top of the patio, but it really adds a lot of character. ✌
Love the videos. This is about the same shape patio I will be going with. Thanks for all the details. I went to my supplier over the weekend and they also said the paver manufacturer no longer recommends using stone dust or sand above the base stone/below the pavers. They also recommend using the chip stone. Interestingly, they said to use process gravel instead of clear 3/4" trap rock as the artificial base. Thanks again!
My pleasure, glad the videos have been helpful! That is good they are steering people away from sand / stone dust, but clear stone is still much better... Good luck with your project! ✌
I just discovered your channel last night. You are a great character, solid videos, and phenomenal work. Keep it up! Looking forward to your future content.
Great explanation of the use of sand versus chip stone for concreting the perimeter edge and adding topsoil for turf grass install. Your channel is top notch and great selection of music. So when you’re done, was it good? You Betcha!
Hi Kyle and Benny! Thanks to your amazing videos I am almost done my home patio. I have followed your instructions to the T and my family and friends are jealous. I have 550 sq ft of Genest Grand Kathadin color is meadow. My question is will all these white spots disappear from the top of the pavers? The manufacture date was 8/2022 so they have been sitting wrapped for almost a year. Not every layer has white spots but they are not very attractive. Anyways when this beast of a patio is done ( 21 X 26) I will drink to you and Benny as I enjoy my new patio. Thanks again! You guys are awesome.
That is awesome man, thank you for the great comment and I'm glad my videos helped! And yes, the white spots should go away after it weathers. The sun and rain should slowly make those disappear over time if it is what I think it is. Most times they come when sitting on a pallet for a long time. But I would like to see a picture or 2 so I can be sure... Could you send me a couple to my email? (TheChristianHardscaper@gmail.com)
I think the best way is while the concrete is wet so you can fix movement right away. But I do it after the concrete sets quite often because the timing just doesn't always work out... So either way is good, but if the timing works, while it is wet is the best way.
I am looking to do an open graded base for around 700sq ft pavers (walkway/patio + seperate patio out back). The only options I have are 3/4 washed native and 3/4 trap rock. Any recommendation on which would be better? The washed native is cheaper for me but doesn't look as jagged as the trap rock. In any case no-one around here has heard of this method and they all want to sell me 3/4 process "A" with sand on top. I keep trying to tell them this is not the same. Anyways appreciate your videos, have learned a lot from them. I'm not too far away from you either in Northwest CT.
That's awesome! And the 3/4 trap rock is most likely (granite) stone and the native is probably the crushed blue / grey stone that is common in Connecticut I assume. I would recommend the trap rock. And I hear from quite a few people on here about the fact that most suppliers do not know this method, very sad in my opinion because they should know about it. Good luck with your project and do not listen to them about processed gravel / sand, the open grade base will not fail you. ✌
You absolutely can and the video of how we excavated and backfilled for this patio shows exactly how you need to prepare the base for a driveway with open grade base. Here is a link to that video 👉ua-cam.com/video/qAdhcHK5rw4/v-deo.html
Hey thanks again for your awesome videos and sharing your knowledge. You are helping me out and I’m sure a lot of other people. Question: when I tamp the pavers and poly sand will it crack/cause issues with the concrete edge restraint? Thanks
No problem at all, glad the videos have been helpful! Tamping the edges to hard when poly sanding can crack the concrete, that is one of the reasons why we lift the border pavers up and hammer them into place before we concrete. Then you can tamp the edges softly just to settle the sand into the joints.
Hi there, I’m doing my walkway and made wet cuts with the saw I rented today. 2 problems the sand washes out from the wet saw and the slurry gets on the pavers, any tips to wash off the pavers? You mentioned poly sand will stain the pavers if you leave stuff on top. Thanks!
Id wash it down and scrub it or pressure wash and let it dry well then when it dry it spread poly sand and compact with plate compactor then add more blow the excess and water down
Have a extra rag sometimes some poly washes off and stains the paver and to prevent pressure washing have a helper scrub it down before poly sand dries up
I try to keep the slurry washed off the pavers as I go because of this reason. After you do the poly sand just give it a month and hit it with a cleaner. Paver wash or efflorescence cleaner from srw products should get the pavers back to how they originally looked. Then seal the next day
- The pavers we used on this project are made by (Techo Bloc). - The main pavers are called (Blu 60) "Slate" - meaning they have texture. You can get Blu 60 "Smooth" also. The color blend is called (Champlain Grey). - The border pavers are (Blu 60) also, but it is only the small size of the 3 piece pattern. The color blend is called (Onyx Black)
@@TheChristianHardscaper So you are able to order the small size by itself? I'm doing a patio and my local dealer Carry's the BLU 60 in Champlain grey actually. But I was unsure of how to order the border paver.
I've switched over to sweat pants in this hot weather. Much more comfortable than jeans or even cotton work pants. Doesn't look exactly professional but I totally get why the Arabs wear those loose pants and robes. It makes sense! Lol.
I wear gym shorts from april until october.... 🤣 I don't care about how professional it looks, this industry requires you to be comfortable and loose to be efficient. Jeans and heavy work pants are no good to me. I have heard a lot of guys say that sweat pants are money, I got no problem with that at all ✌
The tip at 9:00 about the small sliver cuts and where you locate the small pieces is sooo good. Esp for a 100% professional finish. I hate small cuts. Esp on wall caps. I see a 1 inch piece of cap on a wall and lose my mind...lol Make two bigger pieces and lose them in the wall vs a cut that looks like bad planning. Good stuff brother!
I totally agree brother. And the sliver cap cuts turn my face red...... 🤣🤣✌
I own a lawn care and landscaping company and want to get into hardscaping. I just discovered you today and have already binged a few hours of your videos. It’s very helpful and it feels like I’m with you learning hands on. Most other youtubers just teach you the basics or just have the camera up and have it on a time lapse whereas you teach us all the details and techniques and the small little things that will help a lot
That's awesome, I appreciate the feedback! That was my main goal when starting the channel, to help others who really want to learn the trade. I was there myself years ago... Spent a lot of time looking on UA-cam to learn hardscaping and there was not much to offer... So I'm glad to hear from people like you that the videos are helpful. God bless and good luck in your future! ✌
I honestly feel like I should be paying you for all your detailed explanation and lessons. Keep up the good work. Subscribers are coming so be patient.
Thank you very much, your support of watching the videos is plenty! I appreciate the feedback and kind words ✌
Can't wait to see the pergola, I am incorporating one in my eventual patio. Gotta find the time to make it!!
The pergola was pretty cool man. The customer bought it and we assembled it for him. It is just a pre made one that rests on top of the patio, but it really adds a lot of character. ✌
Nice cutting 👌
Thanks ✌
Love the videos. This is about the same shape patio I will be going with. Thanks for all the details. I went to my supplier over the weekend and they also said the paver manufacturer no longer recommends using stone dust or sand above the base stone/below the pavers. They also recommend using the chip stone. Interestingly, they said to use process gravel instead of clear 3/4" trap rock as the artificial base. Thanks again!
My pleasure, glad the videos have been helpful! That is good they are steering people away from sand / stone dust, but clear stone is still much better... Good luck with your project! ✌
I just discovered your channel last night. You are a great character, solid videos, and phenomenal work. Keep it up! Looking forward to your future content.
Glad to hear it, thanks for the feedback!
Great job brothers .👍🏻🇺🇸🇺🇸🇺🇸
Thanks brother!
Great explanation of the use of sand versus chip stone for concreting the perimeter edge and adding topsoil for turf grass install. Your channel is top notch and great selection of music. So when you’re done, was it good? You Betcha!
I love watching you guys. Learn alot. God bless.
Glad to hear it brother, God Bless ✌
I enjoyed the video, i trend back through the vid's to lay out my own plan, for guidance, thanks.
That's awesome, thanks for the feedback and good luck! ✌
Beautiful as always
Thank you!
Good job
Looks very nice guy’s 👍
Thank you!
Such a fantastic video, informative and educational. Awesome!!!!!
Glad you enjoyed it, thank you! ✌
I like that border paver man, and good looks on the cuts not being at the ends 👌🏻
Yea, it is a nice look... Thank you!
Excellent work as always. 5 star job.
Thank you!
Hi Kyle and Benny!
Thanks to your amazing videos I am almost done my home patio. I have followed your instructions to the T and my family and friends are jealous. I have 550 sq ft of Genest Grand Kathadin color is meadow. My question is will all these white spots disappear from the top of the pavers? The manufacture date was 8/2022 so they have been sitting wrapped for almost a year. Not every layer has white spots but they are not very attractive. Anyways when this beast of a patio is done ( 21 X 26) I will drink to you and Benny as I enjoy my new patio. Thanks again! You guys are awesome.
That is awesome man, thank you for the great comment and I'm glad my videos helped! And yes, the white spots should go away after it weathers. The sun and rain should slowly make those disappear over time if it is what I think it is. Most times they come when sitting on a pallet for a long time. But I would like to see a picture or 2 so I can be sure... Could you send me a couple to my email? (TheChristianHardscaper@gmail.com)
I love it😊😊😊😊
Hey... first to comment!!!! Another fine job, looks fantastic as always....👍👍
Yea buddy, thanks brother! ✌
Los mejores 😊
Really good video (plus the one before).
Given a choice, would you prefer to vibrate/tamp the sand in while the concreate was wet (
I think the best way is while the concrete is wet so you can fix movement right away. But I do it after the concrete sets quite often because the timing just doesn't always work out... So either way is good, but if the timing works, while it is wet is the best way.
What color stone did you use, looks great!
The color tone of the pavers is called (Champlain Grey) made by (Techo-Bloc).
Is the border paver Techo bloc as well? What color?
Great job , inspiring. Do you do any light fixtures in the pavers ?
I am looking to do an open graded base for around 700sq ft pavers (walkway/patio + seperate patio out back). The only options I have are 3/4 washed native and 3/4 trap rock. Any recommendation on which would be better? The washed native is cheaper for me but doesn't look as jagged as the trap rock. In any case no-one around here has heard of this method and they all want to sell me 3/4 process "A" with sand on top. I keep trying to tell them this is not the same. Anyways appreciate your videos, have learned a lot from them. I'm not too far away from you either in Northwest CT.
That's awesome! And the 3/4 trap rock is most likely (granite) stone and the native is probably the crushed blue / grey stone that is common in Connecticut I assume. I would recommend the trap rock. And I hear from quite a few people on here about the fact that most suppliers do not know this method, very sad in my opinion because they should know about it. Good luck with your project and do not listen to them about processed gravel / sand, the open grade base will not fail you. ✌
Can you use open grade base for a driveway? If not why?
You absolutely can and the video of how we excavated and backfilled for this patio shows exactly how you need to prepare the base for a driveway with open grade base. Here is a link to that video 👉ua-cam.com/video/qAdhcHK5rw4/v-deo.html
Im doing a walkway, and adding lights to the boarder course. What would you suggest as a cover over the wires. I plan on using the concrete boarder.
If it is just low voltage wire, you can just bury in you base material or the soil around the edges. I think that is what you mean...
Hey thanks again for your awesome videos and sharing your knowledge. You are helping me out and I’m sure a lot of other people.
Question: when I tamp the pavers and poly sand will it crack/cause issues with the concrete edge restraint?
Thanks
No problem at all, glad the videos have been helpful! Tamping the edges to hard when poly sanding can crack the concrete, that is one of the reasons why we lift the border pavers up and hammer them into place before we concrete. Then you can tamp the edges softly just to settle the sand into the joints.
i would put the cuts at the two corners
What type of mortar do you use for the edges? Thanks
We just use regular 80lb concrete mix bags from home depot / local masonry supply stores.
I am curious as to why you didn't build a retaining wall in that area that you had to build up so much?
The customer did not want to spend the money on a wall, this way is much cheaper and will hold up just fine 👍
Hi there, I’m doing my walkway and made wet cuts with the saw I rented today. 2 problems the sand washes out from the wet saw and the slurry gets on the pavers, any tips to wash off the pavers? You mentioned poly sand will stain the pavers if you leave stuff on top. Thanks!
Id wash it down and scrub it or pressure wash and let it dry well then when it dry it spread poly sand and compact with plate compactor then add more blow the excess and water down
Have a extra rag sometimes some poly washes off and stains the paver and to prevent pressure washing have a helper scrub it down before poly sand dries up
I try to keep the slurry washed off the pavers as I go because of this reason. After you do the poly sand just give it a month and hit it with a cleaner. Paver wash or efflorescence cleaner from srw products should get the pavers back to how they originally looked. Then seal the next day
What is the name if the pavers and border used here?
- The pavers we used on this project are made by (Techo Bloc).
- The main pavers are called (Blu 60) "Slate" - meaning they have texture. You can get Blu 60 "Smooth" also. The color blend is called (Champlain Grey).
- The border pavers are (Blu 60) also, but it is only the small size of the 3 piece pattern. The color blend is called (Onyx Black)
@@TheChristianHardscaper So you are able to order the small size by itself? I'm doing a patio and my local dealer Carry's the BLU 60 in Champlain grey actually. But I was unsure of how to order the border paver.
Yes, you can order the small size separately. Just let your provider know and I’m sure they can get it for you 🤙🏻
@@TheChristianHardscaper Thanks brotha I appreciate your responses 👍🤟
What’s the brand of geotextile fabric and geo grid?
The fabric and grid I use is made by (SRW Products) The fabric is called (SS5)
Great work! How much $ are the stones? What do you typically charge? -Thx and God Bless!
Thank you. Most common pavers cost $5.00 - $6.50 per sq ft. I typically charge $22 - $25 per sq ft to install basic paver patio's / walkways.
I've switched over to sweat pants in this hot weather. Much more comfortable than jeans or even cotton work pants. Doesn't look exactly professional but I totally get why the Arabs wear those loose pants and robes. It makes sense! Lol.
The downside is no place for my hammer or wallet. 😂
I wear gym shorts from april until october.... 🤣 I don't care about how professional it looks, this industry requires you to be comfortable and loose to be efficient. Jeans and heavy work pants are no good to me. I have heard a lot of guys say that sweat pants are money, I got no problem with that at all ✌
U never put plastic edges? Only concrete?
Correct, I never use plastic edging, only concrete ✌