Adwest power steering box. Tips on refitting
Вставка
- Опубліковано 15 січ 2025
- Be part of this channel! = britrest.com/s...
Shop 'till you drop = www.britrest.c...
utreon.com/c/b...
www.paypal.me/...
/ britrest
Your support is appreciated!
If you have a Defender/Tdi problem and do not know how to fix it, drop me a line!
Maybe I can help!?
britrest@britrest.com
Send me a postcard for my wall!
Britannica Restorations Ltd
9 Ch. Rawson
Sherbrooke
Quebec
J1M2A3
Canada
Mikes Top Tips, a series in itself! Brilliant. 😉
Glad you like them!
Hi Mike. Excellent job you´re doing here. I can make a sugestion on the steering box top cover sealing. Once I repaired one of these from one of my LR and I couldn't find a square ring for it and used a round one wich was a little triky to fit, but solved the problem of the leaking. Probably it's a so basic solution that could look stupid if Adwest didn't do that way, and they sure know the reason for a square section seal. Maybe it was lucky me.
Great tip!
...anyone else thought that the steering arm was on back to front?....yup, I'd forgotten it was on a lhd motor! :)
Hi Mike, unrelated question but Land Rover related :-) would you know or remember what size half nut you put on the Defender gear stick when you did that modification to the gear knob some months ago?Many thanks, Richard.
ua-cam.com/video/L6IxTUMQlEg/v-deo.html
1/2 20 UNF
@@BritannicaRestorations Thanks so much Mike :-) yes it is the JAM NUT I need, I did the job you did in the video a year ago, did it with some dry paste which turns into extremely hard cement, it came out really well and neat and the knob never fell off again.
Mike. Would one of the return-2-centre '4-Way/Terrafirma' steering dampers assist the power steering box and pump from turning those phat wheels & tyres ? Well done rebuilding a 4-bolt AdWest ! V.
No need the steering is fine
hey, I replaced the whole box. Now I have the problem that my steering arm doesn't go far enough onto the teeth and the nut is only just with all the threads on it, have you ever had this problem? And is it normal for the washer to be bent after tightening? I would be very happy about an answer :)
Did you use the original drop arm? Usually they go on quite deep
@@BritannicaRestorations No, it's a replica part, I had once made the original draft, but it didn't work much further. Thanks for the answer, there are few people who know about it
Do you still have your original? If so try it to double-check.
Normally the steering box shafts are factory so pretty much 100% correct dimensions
@@BritannicaRestorations thanks i Check it next Week :)
Do these box seals go brittle if it's left empty and on the shelf for a couple of years then?
With new seals? Not really
One of the top recon firms here in the UK told me that they did if empty and unused and it was one they had done. Leave it as it is then?@@BritannicaRestorations
Probably using Britpart seals...
Even Britpart gave up years ago selling recon steering boxes as they were crap
Thanks Mike.
@@BritannicaRestorations
Best thing for leaks , it is to fit oil cooler
I wish there was a magic way of stopping the bottom seal from leaking.
You could send it to me...