I’ve had this case in my possession for about 6 months. Your videos inspire me for my future build. Specifically the wraith ripper build you did inside this case! Future Threadripper for me!
Was literally listening to the music thinking "I wonder where they get this, wouldn't mind a playlist of this for just chilling" and it turns out you make it all yourself! Nice work!
I absolutely love when I get a notification from my favorite youtuber! this build is simply gorgeous, I just can't express how much I love your builds.
I wish he would have shown how he managed the cables on the back. He got it to look clean, with the plates put on. However, I know typically the CPU connector cable, tends to have to be ran at a 45° angle from the PSU. Interested if he added an extension or if he was able to manage it with normal length.
Putting a build like this together right now... ryzen 7 3700x aorus extreme 2080ti, g skill ram rated at 3200mhz same liquid cooler, board is a asus rog strix gaming b450f.. same exact case h500m!! Havent even finished but this case is amazing!! Great build as allways nick..
Hello, I’m building the exact same pc right now, can you please explain how to connect 2 front fans, 1 rear fan and 3 top fans together so I can control them with gigabyte rgb fusion? Do you need any cable splitters or other accessories I need to buy separately? Cause I have the controller pre-installed in the case and one more controller that came with cpu liquid cooler. I also have 3 12v led strips, how should I connect them? Thanks a lot
I really really feels ur pain right now cuz I want to build the same PC but im really affraid of what cable goes to what cable in order to control all rgb together. But im still looking for answers still not found
i connected the 2 front fans and controller into the mobo and used an nzxt usb hub for my daisy chained top and rear fans. my fans are nzxt as well as my aio. one thing to watch for is that the front fans have to be in the right setting or channel in order to be controlled by the rgb fusion software. what i did was open the fusion software and set all the rgb to blue. then i pressed the front panel rgb button until the front fans turned the same blue color. i then changed the color in fusion to pulsing yellow and see if the front fans changed with it. if it did then i had the right channel. if not, then i would hit the front panel button and cycle through until the color and pulsing matched. for all my other fans im stuck using nzxt software to control.
aorus X570 with this H500M case, updated firmware from available download center via cooler master. Booted Fusion 2.0. Major lag in light response whej changing light configuration in Fusion2.0 and only top 200mm fan is responding. Been trying to get this all working for 2weeks now.
@@GearSeekers how you get the clearence for the top 360 rad with the fans on inside of the case ? read many reviews where they say it doesnt fit. You mod the case ?
The EK AIO 360 doesn't quite fit up top with an Asus Rog crosshair VIII Hero MB. The rad fits but the fans below it don't. You could do a pull orientation but the glass top doesn't give a lot of room for airflow.
its a sexy case and this is really nice build. my setup is similar: same case, 9900k, aorus z390 master mobo, strix 1080 ti, nzxt kraken x72 360mm front mounted with push/pull config, kept the front case fans to push, nzxt aer 2 rgb 3 120mm on top, 1 140mm in rear, 1 tb 970 pro m.2 ssd, nzxt usb hub, 32 gb gskill trident rgb 3466 mhz ram, and 1000 watt dark power pro by be quiet! the great airflow of this case helped be get nice overclocks on both cpu and gpu. 10/10 would recommend
Hey Nick sorry i haven’t been Actively watching ur vids I’ve been away. This is the first vid I’ve seen since I came back and it’s great!!! Thanks Nick
Cant wait to do my own build in this case with the gigabyte aorus xtreme waterforce and a 2080 ti waterforce too a good costum loop i cant wait to build😍
How was the cable management, from all those Fan and argb cables. For me it was a nightmare. I even couldn't put the back cover due a lot of cables obstructing.
I’ve been researching cases and found your build. It’s beautiful. May I ask, where is the GPU mounting kit from? Is it Cooler Master? It’s exactly the way I want to go. Not right up against the side panel.
hey man this is such an awesome build! I am particularly interested at how much clearance the vertical GPU has against the side panel. May I ask how did you get that configuration?
Nice build man! I just got me this case, I’ve wanna buy that aorus 4070 ti graphics card with rgb lights. How did you put the card like that? Need a vertical panel for it or not?
I have a h500m 9700k and 2080sc coming. Except I'm a newb builder. You made this seem easy!! How did you get the cables to look non existent!! Also I have a dh15 coming instead of a liquid cooling unit. Can i still fit 2 140mm fans above it? And how much will that lower temps? Thank you!
been looking for a midtower with good airflow. (many good mid-tower airflow corsair cases can´t fit the radiator on top because it collides with the ram). This one, so far, is my best option. This one and 5000d-4000d airflow corsair.
I love this build! Would look better with a "Fire and Ice" colour scheme, but I'm biased! ;) I am curious how you got the AIO fans on the inside of the case. The Pro-Wifi MB must have different VRM covers vs the Aorus Master MB.
Hi. I chose the same case and cooling, but for my Ryzen 2700x. Could you tell me your fan curve? My system is a bit loud, not as loud as my old cooling solution with Enermax and the TG 5 by Sharkoon. Do you had problems about your fan noises? I like your color configuration very much.
Hello, I'll be building a PC in a H500M, but haven't decided on the aio. I am mostly considering ml360r rgb and aorus liquid cooler 360. Which one would you recommend? Thx in advance
I really love the whole look of this build and you nailed it with the colours so damn hard. The GPU is also such a fancy eyecatcher. Keep up the good work! Btw, what tracks did you use for this vid?
love the build its so clean a question if I get the msi z390 gaming pro carbon and the aorus 2080 gaming exteem can I control the rgb of the video card with the msi motherboard or do I have to take an aorus motherboard
I have found that with the h500m as I too have this case it is better to do a push pull confit with the aio for the cpu using the 2- 200mm fans on the front of the case I did that with my 8700k and am now able to overclock it to 5.2 ghz idle temps in mid 20’s and during Aida 64 stress test highest temp was 88
How did you make the radiator and the fans fit into the case at the top? .I also have same case h500m , Asus motherboard , nzxt kraken x73 cooling and i can't install the cooling from the motherboard, I'm nervous. Any solution?
I'm super interested in this case, but I dont know how I feel about the right side panel being tempered glass, is it possible to hide the cabling even with the included management covers?
Hi. Excuse the query. I am mounting a pc with a motherboard x570 aorus elite and h500m. But I don't know where to connect the cabinet rgb controller to the board. The cabinet rgb controller has 2 options for Gigabyte or Asus / asrock / Msi boards. I should connect the Gigabyte but I don't know which port to look for on the board. The only one that seems to match is (Board) D_Led with (cabinet controller) Asus / Asrock. The gigabyte driver does not know which port to go on. Thank you.
is that case same size as H500 ARGB? I'm having a hard time fitting my ML360R RGB cooler on top area like yours. It feels like it's too big for my case. BTW this is my first PC Build
Hey gear seekers! I have started my pc build in the h500m case. I have the same aio cooler and cant fit it up the top? I have 2 8 pin connectors on the motherboard on the top left and the radiator doesnt fit with the cabling there?
man I was going to use the h500m for my build with almost the exact same specs and after watching this video i can say only one thing. HOLY FUCKING SHIT
how you get the clearence for the top 360 rad with the fans on inside of the case ? read many reviews where they say it doesnt fit. did you mod the case ?
The case is not modded. Those reviews are wrong. I've had a stack of these cases and every one of them had a 360 up top with all types of mobos. I ran a Threadripper system in one for 8 months with a 360 up top with no issues either. The problem with reviews are most of the time they dont actually build anything in them
@@GearSeekers Ty , hard to find good info on internet. Wanted to be sure for my new ryzen build. Was the only thing holding me back on buying this over the fractal case.
I know it's been years, but I had a problem with this, my cooler was touching the mobo heatsink, preventing it from being placed in the correct position at the top. My solution was very simple, use that thread on the case (which is used to fix the motherboard to the case) as a spacer, here's a tip for someone who one day reads this comment
I just finished this build, everything the same but using AMD ryzen 7 3700x. What program did you use to sync all the lights that same colour and the gpu. Because rgb fusion and version 2.0 both don't work and crash. Please help
I’ve had this case in my possession for about 6 months. Your videos inspire me for my future build. Specifically the wraith ripper build you did inside this case!
Future Threadripper for me!
Was literally listening to the music thinking "I wonder where they get this, wouldn't mind a playlist of this for just chilling" and it turns out you make it all yourself! Nice work!
Yet again an amazing build with a great colour theme and part choice, as I've said so many times before!
I absolutely love when I get a notification from my favorite youtuber! this build is simply gorgeous, I just can't express how much I love your builds.
Thanks so much!
The graphics card looks GORGEOUS
just a random guy who likes stuff definitely a card designed to be mounted vert.
@@jazzt3839 yeah. Why even bother putting rgb on the front?
Plz tell me how many additional fans I can use without the 200mm fans and the rear fan in this case??
Does it come like that or is it modified ?
@@swiftblaqness it comes like that
Awesome build Nick, everything came together very well. Hope your friend enjoys his/her new beast
Who´s the coolest master.. easy.. Nick.. The Jedi Master.. :-) Really cool build!!!!!
Sir plz tell me can I use a 360mm aio along the two big 200mm fans and can I attach 3 120mm fans in the top of this case??
I love the color choice of the lighting
Such a fantastic build and colour scheme.
Thanks fams!
I wish he would have shown how he managed the cables on the back. He got it to look clean, with the plates put on. However, I know typically the CPU connector cable, tends to have to be ran at a 45° angle from the PSU. Interested if he added an extension or if he was able to manage it with normal length.
Putting a build like this together right now... ryzen 7 3700x aorus extreme 2080ti, g skill ram rated at 3200mhz same liquid cooler, board is a asus rog strix gaming b450f.. same exact case h500m!! Havent even finished but this case is amazing!! Great build as allways nick..
Honestly your videos are top notch, love the build :)
Hello, I’m building the exact same pc right now, can you please explain how to connect 2 front fans, 1 rear fan and 3 top fans together so I can control them with gigabyte rgb fusion? Do you need any cable splitters or other accessories I need to buy separately? Cause I have the controller pre-installed in the case and one more controller that came with cpu liquid cooler. I also have 3 12v led strips, how should I connect them? Thanks a lot
I really really feels ur pain right now cuz I want to build the same PC but im really affraid of what cable goes to what cable in order to control all rgb together. But im still looking for answers still not found
i connected the 2 front fans and controller into the mobo and used an nzxt usb hub for my daisy chained top and rear fans. my fans are nzxt as well as my aio. one thing to watch for is that the front fans have to be in the right setting or channel in order to be controlled by the rgb fusion software. what i did was open the fusion software and set all the rgb to blue. then i pressed the front panel rgb button until the front fans turned the same blue color. i then changed the color in fusion to pulsing yellow and see if the front fans changed with it. if it did then i had the right channel. if not, then i would hit the front panel button and cycle through until the color and pulsing matched. for all my other fans im stuck using nzxt software to control.
so i've built it, i connected everything to aio controller an it works well, but you can only control it with coolermaster software
@@LocalSlaveHolder perfect so no need for extra splitter or 4pin to 3pin converter as I can read on reddit ? I'm confused rn
aorus X570 with this H500M case, updated firmware from available download center via cooler master. Booted Fusion 2.0. Major lag in light response whej changing light configuration in Fusion2.0 and only top 200mm fan is responding. Been trying to get this all working for 2weeks now.
Holy s@%t! This looks amazing... Great job!!
Btw... how did u mount the gpu vertically so close to the motherboard??
Vertical GPU mounting kit
I like the names you come up with for the pc's, going to start naming my pc builds lol, excellent love your videos and music top notch.
Thanks so much!
😂 The names are the hard part!
@@GearSeekers how you get the clearence for the top 360 rad with the fans on inside of the case ? read many reviews where they say it doesnt fit. You mod the case ?
Very quality content ! Thumbs up !
The EK AIO 360 doesn't quite fit up top with an Asus Rog crosshair VIII Hero MB. The rad fits but the fans below it don't. You could do a pull orientation but the glass top doesn't give a lot of room for airflow.
What is the vertical GPU riser used? Does it slot into the horizontal PCI ports in the back instead of the intended vertical ports?
I subscribed because that RGB wall looks awesome!
This build is ART!!!!
its a sexy case and this is really nice build. my setup is similar: same case, 9900k, aorus z390 master mobo, strix 1080 ti, nzxt kraken x72 360mm front mounted with push/pull config, kept the front case fans to push, nzxt aer 2 rgb 3 120mm on top, 1 140mm in rear, 1 tb 970 pro m.2 ssd, nzxt usb hub, 32 gb gskill trident rgb 3466 mhz ram, and 1000 watt dark power pro by be quiet! the great airflow of this case helped be get nice overclocks on both cpu and gpu. 10/10 would recommend
Lol. Just when I think I've settled on a build...
Thanks! Lol. Great one, man. Appreciate it. :)
Love your channel.
Hey Nick sorry i haven’t been
Actively watching ur vids I’ve been away. This is the first vid I’ve seen since I came back and it’s great!!! Thanks Nick
Thanks so much!
The colorway of the rgb is awesome!
On my h500m i put 3hd 120mm front and 6 push pull on top and on the rear i have hybrid 2080ti. Looks amazing
Well...i just love this case of CM and as always ....your build video style is out of the world man !!! ijust love it...♥
Cant wait to do my own build in this case with the gigabyte aorus xtreme waterforce and a 2080 ti waterforce too a good costum loop i cant wait to build😍
I see your video thumbnail, I click, I click like button and I watch your video..
I see your nice comment, I click like and say thankyou.
Thankyou! 😂
@@KlaireGearSeekers Seriously, you have the best studio lighting ambient. Keep up the good work! Hope you get first 1m subs!
@@themainproject You're way too kind! Thank you so much!
Beautifully made video! Liked and subbed.
Hey. That PC is sick. Did you use the same lighting software for the case fans and the GPU rgb? If so, what is it?
How was the cable management, from all those Fan and argb cables. For me it was a nightmare. I even couldn't put the back cover due a lot of cables obstructing.
I’ve been researching cases and found your build. It’s beautiful. May I ask, where is the GPU mounting kit from? Is it Cooler Master? It’s exactly the way I want to go. Not right up against the side panel.
hey man this is such an awesome build! I am particularly interested at how much clearance the vertical GPU has against the side panel. May I ask how did you get that configuration?
I think he use a vertical panel for that. But I don’t know for sure, I also want too know please.
What PCIe riser is that? I like how it was brought closer to the MB to allow for the fans to breathe
Nice build man! I just got me this case, I’ve wanna buy that aorus 4070 ti graphics card with rgb lights. How did you put the card like that? Need a vertical panel for it or not?
And does it hurt too place the graphics card vertical? Or do you rather point me on horizontal for a long last. Or does it not affect?
I have a h500m 9700k and 2080sc coming. Except I'm a newb builder. You made this seem easy!! How did you get the cables to look non existent!! Also I have a dh15 coming instead of a liquid cooling unit. Can i still fit 2 140mm fans above it? And how much will that lower temps?
Thank you!
Hi, nice video, how do u set the color in violet and green? do You use the controller or the mobo 3 pin slot? Thank you
been looking for a midtower with good airflow. (many good mid-tower airflow corsair cases can´t fit the radiator on top because it collides with the ram). This one, so far, is my best option. This one and 5000d-4000d airflow corsair.
Will this setup run chiapet simulator with nvidia hairworks? 🐗☺👍
Epic build !!
Thanks so much!
@@GearSeekers Sad to see there aren't PC enthusiasts like you guys here in Middle east...
I love this build! Would look better with a "Fire and Ice" colour scheme, but I'm biased! ;) I am curious how you got the AIO fans on the inside of the case. The Pro-Wifi MB must have different VRM covers vs the Aorus Master MB.
Now this is a good question. The trick was flipping the Rad around. It clears it by 2mm
Hi.
I chose the same case and cooling, but for my Ryzen 2700x. Could you tell me your fan curve? My system is a bit loud, not as loud as my old cooling solution with Enermax and the TG 5 by Sharkoon. Do you had problems about your fan noises? I like your color configuration very much.
Hello, I'll be building a PC in a H500M, but haven't decided on the aio. I am mostly considering ml360r rgb and aorus liquid cooler 360. Which one would you recommend? Thx in advance
I really love the whole look of this build and you nailed it with the colours so damn hard. The GPU is also such a fancy eyecatcher. Keep up the good work!
Btw, what tracks did you use for this vid?
We make all the music on the channel
grsk.co/patreon
love the build its so clean a question if I get the msi z390 gaming pro carbon and the aorus 2080 gaming exteem can I control the rgb of the video card with the msi motherboard or do I have to take an aorus motherboard
It doesn't matter which motherboard you have.
@@GearSeekers thank you👍
Can u tell me how did you sync rgb ...did you use argb controller in case or just the motherboard
How do you orginice all the wires that this H500M have?? also, how do you connect the small circuit that this H500M have?
I have found that with the h500m as I too have this case it is better to do a push pull confit with the aio for the cpu using the 2- 200mm fans on the front of the case I did that with my 8700k and am now able to overclock it to 5.2 ghz idle temps in mid 20’s and during Aida 64 stress test highest temp was 88
Yeah I have found that building with this case 20+ times that it doesn't matter that much.
How did you make the radiator and the fans fit into the case at the top? .I also have same case h500m , Asus motherboard , nzxt kraken x73 cooling and i can't install the cooling from the motherboard, I'm nervous. Any solution?
Nice video with nice music. Thanks
Great job!
Thanks!
I have a question how did you put the gtx in vertical?
I'm super interested in this case, but I dont know how I feel about the right side panel being tempered glass, is it possible to hide the cabling even with the included management covers?
great video, was it easy working in this case?
Yeah. The easiest case ever to work in
May I know how to set those fans colour as so pretty?
Ok I am not a professional but how did you put the graphics card like this
Hi. Excuse the query. I am mounting a pc with a motherboard x570 aorus elite and h500m. But I don't know where to connect the cabinet rgb controller to the board. The cabinet rgb controller has 2 options for Gigabyte or Asus / asrock / Msi boards. I should connect the Gigabyte but I don't know which port to look for on the board. The only one that seems to match is (Board) D_Led with (cabinet controller) Asus / Asrock. The gigabyte driver does not know which port to go on. Thank you.
is that case same size as H500 ARGB? I'm having a hard time fitting my ML360R RGB cooler on top area like yours. It feels like it's too big for my case. BTW this is my first PC Build
As with this build and the Patreon build just curious how you are achieving that two tone lighting on the fans? Is it to do with ARGB over RGB?
Yes it's ARGB.
The ML360R RGB you using as in or out the air :D? sorry for bad english
Could a NZXT Kraken X72 be mounted on top the same way? Will it fit?
What do u guys think of the cooler master master air ma620m.
I have a question whit fans on this are intake and exaust I plan on using this case but just want to know the best fan direction for it
How to set up dual color scheme like that? Using Aurora? Im using MSI mainboard with Mystic light,still dont know how to setup the color like yours.
The front usbs are connected with only one cable or 4?
Am i the only one who watch every single pc build, but never had one? 😂
Cool stuff 😎
Amazing! 😍😍😍
Can you control the lightbar with Gigabyte Fusion too? Didn't find it in the compatibility list
Absolutely great build btw, love it!!!
Of course
@@GearSeekers Thanks!
Which ARGB controller can support this topic？
I have the H500M too. These colors are your choice or from the Aurora plugin?
All custom lighting. We don't use any presets
@@GearSeekers can you tell us the colors you have used?
@@GAGNATRON no idea. We built this a long time ago for someone else.
Could you tell me please, what exactly track playing in the beginning?
I found it, but sound not the same.
What PSU you used ? I want to buy the same
I know this case has vertical gpu mounting but do you still have to buy vertical mounting brackets? Just ordered this case so please let me know 🙏😍
Yes. I would
Panzer Evo RGB or H500M???
where did you use this CM RGB Light Bar:? i cant find in this video
Same here...
I am confused between this and the Corsair 680x
Did you connect the argb to the controller from ml360r? Or motherboard for these colors?
How is the airflow in this case ?
Hey gear seekers! I have started my pc build in the h500m case. I have the same aio cooler and cant fit it up the top? I have 2 8 pin connectors on the motherboard on the top left and the radiator doesnt fit with the cabling there?
Hi, can i make the same effect that you created with my aorus b550 elite atx?? Thank you please respond
How did you customize the case lights?
why is this so perfect
what is the weight of this case ?
I have the regular H500 case, does somebody knows if a 360 mm cooler still fits?
Do you have any issues with CPU tempertures cause of the GPU heat is getting through the AIO?
no
A question, because you mounted the vertical card with that adapter and not with the space it brings the case to put it vertical?
No it makes the airflow better with that bracket.
man I was going to use the h500m for my build with almost the exact same specs and after watching this video i can say only one thing.
HOLY FUCKING SHIT
what support do you use to put the graphics card like this?
the case already has a graphics card vertical bracket installation why did not you use it
Firstly. It doesn't include a riser.
Secondly. Because the GPU sits too close to the glass
Hey just wondering what mount is being used to hold the GPU Vertical Im very close to having this same build and was wondering about this?
Its coolermaster gpu mount or you could also use cablemods
@@ebicgaemer3330 awsome thank you so much!
This is awesome❤
what did you use to mount the gpu like that?
What did you use to mount the gpu vertically?
How were you able to change the g skill ram rgb? None of the software works with it. I have the same motherboard as in this setup.
RGB Fusion
Gear Seekers rgb fusion doesn’t read my ram.
how you get the clearence for the top 360 rad with the fans on inside of the case ? read many reviews where they say it doesnt fit. did you mod the case ?
The case is not modded. Those reviews are wrong. I've had a stack of these cases and every one of them had a 360 up top with all types of mobos. I ran a Threadripper system in one for 8 months with a 360 up top with no issues either.
The problem with reviews are most of the time they dont actually build anything in them
@@GearSeekers Ty , hard to find good info on internet. Wanted to be sure for my new ryzen build. Was the only thing holding me back on buying this over the fractal case.
I know it's been years, but I had a problem with this, my cooler was touching the mobo heatsink, preventing it from being placed in the correct position at the top. My solution was very simple, use that thread on the case (which is used to fix the motherboard to the case) as a spacer, here's a tip for someone who one day reads this comment
Does the green and black wiring come with the parts or where do I get that (PC building newb)
No
@@GearSeekers what is the name? Where can I get it?
Holy dayum I want this
I just finished this build, everything the same but using AMD ryzen 7 3700x. What program did you use to sync all the lights that same colour and the gpu. Because rgb fusion and version 2.0 both don't work and crash. Please help
Does the case have 200mm argb or rgb fans??
@@andreslayz the case comes with argb fans. It comes pre installed
does it have dust filters