Hyperspin-Reassign Controller Order (Never have an issue again)

Поділитися
Вставка
  • Опубліковано 17 січ 2025

КОМЕНТАРІ • 84

  • @latin625
    @latin625 4 роки тому +2

    Thanks, I cant seem to locate this app any longer. do you have a place I can find it at. Thanks

    • @PlanetGeekdom
      @PlanetGeekdom  4 роки тому +1

      It’s on emumovies ftp under ninja dojo and I believe I posted it on hyperspin downloads. Is it not on my mega as well?

    • @InfamouzSyco
      @InfamouzSyco 3 роки тому +1

      Were you able to locate the file? I'm seem to have trouble in getting it as well. I tried emumovies but can't locate it. I also tried the link to your mega on the description and it's not there. Any help will be gladly appreciated.

    • @PlanetGeekdom
      @PlanetGeekdom  3 роки тому

      Hit me up on discord discord.gg/Fp3FtWt

  • @jimbaby0336
    @jimbaby0336 3 роки тому +2

    Hi
    Will it work with xin mo controller

    • @PlanetGeekdom
      @PlanetGeekdom  3 роки тому

      Interesting I would think so but let me know I don’t have an example to test

  • @BB-wh2vu
    @BB-wh2vu 6 років тому +2

    Very useful, Thanks

  • @RetroHumanoid
    @RetroHumanoid 6 років тому +2

    My cabinet has the Bliss Box (4 Ports),4 wireless xbox360 controllers,2 wireless guitars,2 wireless mics,my ipac,and 2 vjoy drivers...so I am constantly fiddling with controller setup,mainly to make sure bliss box stays in the top 4 ports for retroarch...this could very well solve my issues...I will mess around with this and see if it does,thanks for the info!

    • @PlanetGeekdom
      @PlanetGeekdom  6 років тому

      Rock on rh I too have blissbox and man what a nightmare. Thanks Microsoft ha

  • @WildPumpk1n
    @WildPumpk1n 6 років тому +1

    Yes thanks for the tip. I will test it with my xbox360 controller on PC who change often .

  • @advidrunner5104
    @advidrunner5104 5 років тому +2

    I’m having trouble how to set my ps2 joystick 🕹 on my hyper spin. Can you please help? I just want my arcade joystick 🕹 to play on ps2. All my buttons work just not my joystick 🕹

    • @PlanetGeekdom
      @PlanetGeekdom  5 років тому

      The emulator itself you probably want it set to digital joystick instead of analog. You can do this in rlui as well under module settings

    • @advidrunner5104
      @advidrunner5104 5 років тому +1

      Planet Geekdom what file is this under?

    • @PlanetGeekdom
      @PlanetGeekdom  5 років тому

      Try opening rlui, go to ps2 System, click the modules tab and select the emulator you are using say epcsx, then click the edit module settings button in this tab. There will be a drop down for the type of joystick. Select digit. If you want a game to be analog, some require it. Go to the next tab and push the + add the game then select the joystick as analog

    • @PlanetGeekdom
      @PlanetGeekdom  5 років тому

      You sort of see this 22:00 in this video of this were the psx example ua-cam.com/video/p5bzHQH8P2g/v-deo.html

  • @tonyworrell6059
    @tonyworrell6059 6 років тому +1

    Thankyou for the info

  • @TruestMusic
    @TruestMusic 11 місяців тому +1

    Does this work for launchbox as well? Or just Hyper spin? Also can you send me a different link to this to download? The Hyper sound site is still down. Please help thanks you in advance.

    • @PlanetGeekdom
      @PlanetGeekdom  11 місяців тому +1

      Hit me up on discord. Yes you can launch this with launchbox and it will work

    • @TruestMusic
      @TruestMusic 11 місяців тому

      @@PlanetGeekdom what's your handle on discord?

  • @InfamouzSyco
    @InfamouzSyco 3 роки тому +1

    Hi, I notice the hyperspin forum is down and heard the Tur-Game file is no longer available. Can you point me into the right direction where I can get this software. I also tried your link to your Mega.nz that's in the description but can't find it. Any help will be greatly appreciated. Thank u

    • @PlanetGeekdom
      @PlanetGeekdom  3 роки тому

      Hit me up on discord discord.gg/Fp3FtWt

  • @chucksgrace3225
    @chucksgrace3225 2 роки тому +1

    Do you need to set your trackball and mouse too? Will those order changes conflict upon restart? Or do you only have to worry about the aimtrak devices?
    Also will this method work for Sega Model 3 light gun games?

    • @PlanetGeekdom
      @PlanetGeekdom  2 роки тому

      Ya just worry about the aimtrak device. I’m not sure about sega model 3 guns🤔

    • @chucksgrace3225
      @chucksgrace3225 2 роки тому +1

      @@PlanetGeekdom No I mean the supermodel emulator. Will it work in that as well?

    • @PlanetGeekdom
      @PlanetGeekdom  2 роки тому

      Yep with sinden

  • @imnotstupidjustslow9366
    @imnotstupidjustslow9366 4 роки тому +1

    When I click on the buttons I want to map it doesn't map. It's highlighted in yellow, I tap my joystick button I want to map on RocketLauncher, but the highlighted word 'Disabled' doesn't change to the button I pressed on the joystick. It just stays as Disabled in highlighted yellow. Disk Management see the joystick. In MAME I can hit Tab and map it in there, but I can't map the joystick to control Hyperspin.

    • @PlanetGeekdom
      @PlanetGeekdom  4 роки тому

      To update the hyperspin controls use hyperhq and if you need joytokey updates just make sure to save a hyperspin profile too

  • @mamefan
    @mamefan 6 років тому +1

    I don't use controllers, but I have joysticks, a trackball, and a spinner. Would this prevent my analog controls from switching? For example, my trackball controls are always switching to mouse 4 when only mouse 5 will work in games. I have a wireless logitech usb keyboard with a trackpad that I turn on and off, and that's probably why.

    • @PlanetGeekdom
      @PlanetGeekdom  6 років тому

      Yep this solution fixed all that nonsense that windows is flipping around. Just find the pid using the find exe or you may have to go to control panel and devices to determine the pid to the mice. I wrote a powershell script as well to find these before I stumbled on this amazing app

  • @ronopotomusjones2516
    @ronopotomusjones2516 6 років тому +1

    Thank you so much!!!

  • @mikemelo4961
    @mikemelo4961 6 років тому +2

    Another good video. Id like to add a suggestion you should turn your mic vloume up i have my volume set to max and its still low.

  • @larrybird4026
    @larrybird4026 3 роки тому +1

    Im over here still trying to figure out how to use on windows 10. I couldn’t use anymore after upgrading from WIN 7-10

    • @PlanetGeekdom
      @PlanetGeekdom  3 роки тому

      Hit me up on discord discord.gg/Fp3FtWt

  • @satoshinakamoto9597
    @satoshinakamoto9597 3 роки тому +1

    Please help me, rlauncher was working fine until yesterday , still my audits are green but upon launching cannot find D:Arcade/Untilies/ JoytoKey/joytokey.exe. Please help if you can , just trying to get back on Metroid other ZM. I don’t know happened. I didn’t change any settings.

    • @PlanetGeekdom
      @PlanetGeekdom  3 роки тому

      Let’s try discord to help discord.gg/Fp3FtWt

  • @chucksgrace3225
    @chucksgrace3225 5 років тому +1

    This is great thank you. Will this method also work to set Hyperspin as high priority to launch quickly when you turn on PC?

    • @PlanetGeekdom
      @PlanetGeekdom  5 років тому

      I think to make hyperspin high priority, you need to change that in your pc start up settings

    • @chucksgrace3225
      @chucksgrace3225 5 років тому +1

      @@PlanetGeekdom I've tried a few different methods. Still no luck. I heard doing it as a bat file works for some people. I'll try that. If you did a video on that as well, that would be awesome, because so far I'm stuck. Even when I set hyperspin to high priority it still takes 15 seconds after windows starts for it to load and I have a nice computer with SSD.

    • @PlanetGeekdom
      @PlanetGeekdom  5 років тому

      Chucks Grace so you have hyperspin launch at start up at high priority? You could so try adding it to the task scheduler in Windows

    • @chucksgrace3225
      @chucksgrace3225 5 років тому

      @@PlanetGeekdom Thanks i haven't tried that yet. Will try that next and let you know.

  • @CyD-X
    @CyD-X 4 роки тому +2

    As mentioned in the comments, I use multiple controllers for the different console emulators. Noticed that the ID's of the controllers are the same.
    Port1=VID_0079&PID_0006
    Port2=VID_0079&PID_0006
    Port3=VID_0079&PID_0006
    Port4=VID_0079&PID_0006
    Does this matter? each is made by the same company (retropower) There's a PS2, NES, Genesis and N64. I have a feeling that it'll load the 4 randomly in the 4 ports. What are your thoughts?

    • @PlanetGeekdom
      @PlanetGeekdom  4 роки тому +1

      Hmm each port has its own unique identifier . They should all be different, can you look into properties under the controller section and check for extra input to each device? The fingerprint should be in one of the property tabs

    • @CyD-X
      @CyD-X 4 роки тому +1

      @@PlanetGeekdom I did confirm that similar joysticks may remap. For example I run the same arcade sticks for player 1 and 2. They flip flop from time to time. They use the same drivers and windows doesn't appear to recognize them as different fingerprints. Xbox controller tends to stay where it's designated and so does the Sega Saturn gamepad. The other controllers I have, although look different, they still use the same drivers. I guess windows never intended us to use 5 controllers lol. Oh well still hunting for an option. This works well when all the controllers are different.

    • @gianlucacassandra5873
      @gianlucacassandra5873 4 роки тому

      @@CyD-X Have you found a solution for this problem? The same thing happens to me too.

    • @CyD-X
      @CyD-X 4 роки тому

      @@gianlucacassandra5873 Negative, internally the controller looks identical to your pc. So your PC doesn't won't know which is which.

    • @PlanetGeekdom
      @PlanetGeekdom  4 роки тому

      I think the fingerprints can have even longer pid keys to be honest. There should be a unique key per controller if you dig far enough down looking at the device Id in properties

  • @overkast6841
    @overkast6841 6 років тому +1

    I have various retro controllers I want to use with the matching system on HS, how can I set all those up to work?

    • @PlanetGeekdom
      @PlanetGeekdom  6 років тому

      Plug them all in at once then assign the number you want them to have using this tutorial. You can also get something called blissbox

    • @overkast6841
      @overkast6841 6 років тому +1

      Planet Geekdom but I have a bunch, even more than I have plugs with an extra USB hub

    • @PlanetGeekdom
      @PlanetGeekdom  6 років тому

      That’s fine, plug in what you have, then assign the controllers a number in the ini based on what you want them to have. So just make up a number like the nes will always be 4 or whatever. This app is really just used for if you have a specific controller plugged in or always used. I don’t think this is intended for like 20 controllers but rather like 2 lightguns and 2 controllers always plugged in for example. If you are trying to set up your controllers I think the tutorial on joytokey could be more useful for you

  • @keithcorcoran9515
    @keithcorcoran9515 3 роки тому +1

    I know this video is old but Tur-Game Controller Order doesn't find my 2 8BitDo controllers which is really what I need this fix for. :(

    • @PlanetGeekdom
      @PlanetGeekdom  3 роки тому

      Ah man, and it doesn’t find the controllers? They should have a device id right? Or are they exactly the same controller id somehow?

    • @keithcorcoran9515
      @keithcorcoran9515 3 роки тому +1

      @@PlanetGeekdom it seems like they both have the same ID even though they show up in windows and Joy2Key as separate controllers. Luckily for now I only have these 2 USB controllers but not sure how it's going to work out when I add the Aimtrak guns.

    • @PlanetGeekdom
      @PlanetGeekdom  3 роки тому

      Aimtraks wil have different ids

  • @retroarcadeking
    @retroarcadeking 2 роки тому +1

    Approx.
    We have mastered the controllers.
    These are now mice ...
    I have a couple of mice in the win7 system, namely one normal (normal mouse), road -trackball.
    And the third and fourth, and -that most important- as spinners, one made as left / right and the road as up / down.
    I have a problem in the DICE emulator because when I restart my computer randomly, it changes my spinners and it is impossible to play.
    Anyone know how to get around this?

    • @PlanetGeekdom
      @PlanetGeekdom  2 роки тому

      Try making the ini file read only in the dice emulator?

    • @retroarcadeking
      @retroarcadeking 2 роки тому

      @@PlanetGeekdom Thanks for the interest, but in the DICE emulator (adam's emulation wip), there are no ini files.

    • @PlanetGeekdom
      @PlanetGeekdom  2 роки тому

      In the dice folder?

    • @retroarcadeking
      @retroarcadeking 2 роки тому +1

      @@PlanetGeekdom Yes, there is no folder in the folder.
      But the fault of the emulator itself.
      I will try to contact the emulator developer himself.
      Thanks.

    • @PlanetGeekdom
      @PlanetGeekdom  2 роки тому

      Maybe join my discord, it’s easier to Assist there

  • @t.r.crockett5883
    @t.r.crockett5883 6 років тому +1

    Interesting fix👾👾👾

  • @ericbarnes2212
    @ericbarnes2212 4 роки тому

    How do I change the player 3,4 joysticks to play 8 way instead of 4 way?

    • @PlanetGeekdom
      @PlanetGeekdom  4 роки тому

      Do you have a servo stick or j stick ? You need a compatible joystick that can switch

  • @fraserkinloch3765
    @fraserkinloch3765 6 років тому +1

    When my 360 pad is plugged in it’s joy1
    As soon as I plug aimtrak in it steals joy 1 and makes my 360 pad joy2
    Will this solve the issue so 360 pad stays joy1 in mame?

    • @PlanetGeekdom
      @PlanetGeekdom  6 років тому

      Yep

    • @fraserkinloch3765
      @fraserkinloch3765 6 років тому +1

      Planet Geekdom no no no it’s not working 😫🥵

    • @fraserkinloch3765
      @fraserkinloch3765 6 років тому

      How do we fix this :((((

    • @PlanetGeekdom
      @PlanetGeekdom  6 років тому +1

      It works for me. Be sure to plug in all your controllers. Then edit the config with the order you want them. Then upon start up be sure the app opens and it will reconfigure the number for all your controllers at startup. Yours doesn’t do that?

    • @fraserkinloch3765
      @fraserkinloch3765 6 років тому +1

      Planet Geekdom
      No I’ll be home in an hour and I’ll go through it again.
      I used your program from your ftp, that shouldn’t be An issue?
      I changed port 1 on yours and put the code of my 360 pad in it and port 3 was my lightgun but your port 3 is same Cade as mine.
      As soon as I plug my aimtrak in it takes joy1
      I’ll reset my computer and make sure the program starts up ok

  • @coreyt55
    @coreyt55 4 роки тому +1

    Great tutorial. This save me so much time. Win 10 was messing up my controller order!!

  • @fraserkinloch3765
    @fraserkinloch3765 6 років тому +1

    Right ninja when you free to chat?