The fact that this has over 26,000 views speaks volumes as to the defective issues. I have replaced the pump rotor, magnetic flow sensor flushed it both directions, filled it drained it filled it changed the filter, no filter stood on my head and even kicked it..nothing works..I have flow out but not in..where is a clog??
I have done every hack available..replaced the impeller twice..replaced the low flow sensor..flushed both directions changed filter, no filter, filled to proper level made sure water level is good….etc..I have flow, pump seems to be pushing a good flow out i am exasperated and about to smash i 1:47 t
Help! I've put the drain stoppers on both tubes to disconnect the pump. But the C pipe is 100% pouring water out, as though there is no cap on the inside of the spa. Can someone tell me what the problem is and how to fix this?
Thank you for this info. gonna try this. BTW I've found some parts at eBay. Bought and replaced the propeller but I still keep getting this error so gonna this now. But my propeller definitely failed prob from all this gunk in there
New inflatable owner and have gotten this code a few times. Mine is outside and today it’s 44 degrees and it’s only at 97 degrees. I’ve been trying to swap out filters but didn’t realize you swapped after every use. What’s good for cleaning them?
Hi. I tried this and it didn’t work. We tried changing filters and within 20 minutes to 24 hours the e02 message again. I even tried cycling descaler mixed in water (in a bucket). A lot of gunk came out. Rinsed out the pump like you did in the video. The above fixed it for about 72 hours. Any ideas? Water level is normal. Frequent filter changes too. Thanks I’m advance
i went over the design of it and ended up drilling a hole in the plastic screw end for the filter housing. solved the continuous error.
Wow. I’m now curious where that is exactly.
^probably the most ingenious thing I've read. gonna try this on mine in 5 minutes if it throws this error again. thanks mate
Where did you drill the hole?
The fact that this has over 26,000 views speaks volumes as to the defective issues. I have replaced the pump rotor, magnetic flow sensor flushed it both directions, filled it drained it filled it changed the filter, no filter stood on my head and even kicked it..nothing works..I have flow out but not in..where is a clog??
Can you elaborate?
You don’t have to empty the jacuzzi
I have done every hack available..replaced the impeller twice..replaced the low flow sensor..flushed both directions changed filter, no filter, filled to proper level made sure water level is good….etc..I have flow, pump seems to be pushing a good flow out i am exasperated and about to smash i 1:47 t
Help! I've put the drain stoppers on both tubes to disconnect the pump. But the C pipe is 100% pouring water out, as though there is no cap on the inside of the spa. Can someone tell me what the problem is and how to fix this?
Thank you for this info. gonna try this. BTW I've found some parts at eBay. Bought and replaced the propeller but I still keep getting this error so gonna this now. But my propeller definitely failed prob from all this gunk in there
Have you found the problem? Mines the same
I did all that and nothing works…manufacturer contact information is not to be found . So frustrating
Mine is acting up right now too, i have to do some more work myself.
New inflatable owner and have gotten this code a few times. Mine is outside and today it’s 44 degrees and it’s only at 97 degrees. I’ve been trying to swap out filters but didn’t realize you swapped after every use. What’s good for cleaning them?
Soak them in any detergent. And spray them off. In this video is a hose attachment for cleaning the filters.
@@michaelmgamingwhy do they dirty so quick?
Hi. I tried this and it didn’t work.
We tried changing filters and within 20 minutes to 24 hours the e02 message again.
I even tried cycling descaler mixed in water (in a bucket). A lot of gunk came out. Rinsed out the pump like you did in the video.
The above fixed it for about 72 hours. Any ideas? Water level is normal. Frequent filter changes too.
Thanks I’m advance
Water pump out the inside housing. It’s annoying but the flush is needed like twice a year
Did exactly this. Turned everything back on…same thing. Frustrating
Sorry to hear flushing both directions worked for me twice now.
You’re jacked, dude
every hot tub use? maybe clean once a week...
Yes their recommendation seams a bit excessive.
❤thanks
All you have to do is replace the filter
No that doesn’t always fix the error, sometimes it’s a pressure differential or air trapped in the system
Garbage review. Loved the last line though… “every hot tub use change your filter! “ Yep, totally responsible expectation , lol