Yes it was as far as im concerned a tractor engine capable of town runs is an absolutely amazing idea for any pick up. They are work first pleasure sencond at the most. But i love my 5.3 chevy as a daily.
The real definition of Ford built tough I have the 94’ 4.9L inline 6 with 5 speed manual transmission and I gotta say that she’s a beast and she still got her full potential low end power
The inventor of the Duraspark ignition lives in Chapin, SC. I've met him, he's a pretty cool guy. Whe Ford shipped their 1,000,000th ignition box, they presented him with a gold plated Duraspark box mounted on a plaque. He has it hung on the wall in his shop.
I’ve had 4 of these straight sixes and they are nearly impossible to kill. My cab rusted out before the engine even had a cough. The bullnose was also my first truck. Great video man!
I've learned something new today: blocks of wood aren't just for holding your vehicle still anymore. And your wife's "That doesn't sound safe" is something I've heard the women in my life when it comes to working on my cars - I would just smile & say, "If I don't come back, that means you were right." I'm looking forward to more - glad to hear you're pushing through these difficult times.
@@BudgetBuildz the rubber on the fire wall,,now thats rare. i swapped out my [ 75 highboy ],300 for a 351c, didnt know much about 300,s. bad mistake.. im in aus. i imported a 62 f100 4x4, 352 FE. not the y block., i think guy fitted a lot of a 65 to it. guards,door,bonnet. [ hood to you yanks ].. & cab as vin says f10,not f11. 4x4. good luck,stay safe..
Awesome! My Dad was a lover of the 300 in the F150. Got 680,000km (400,000mi) on his first one. You reminded me of some great memories working on the 300. Thanks for that!
We always called them Wonder Bars. because you wondered if you were reading correctly. I'm spoiled with the click style, Now people are spoiled with the electronic chime type.
Nice work with that engine. A wooden log must not be missing in any workshop. I have also repair two engines this way. I'm glad you didn't give up right away and fixed the engine.
That's actually a pretty desirable truck, shortbox, stepside, reg cab and 4X4! Lol, in my younger years I would have been shopping for trucks like that 🤣 Love to see a compression test on the old girl to see how bad that one cylinder reads.
luv the bullnoses...i have an '80 too. congrats on getting it going...that cylinder did not look good! 300 was one of Fords best...not too good on mpg, but that's not the point. hopefully there's some floors still in that ol' buzzard
there built for torque,,but to get better econ. fit a better inlet/out headers,flat tops,small cam, twin or 4 bbl carb. killer engine..i have a ,here in aus, a 351c with 302 heads,,on lpg only. 12.1 comp,std engine,no cam, its dangerous..still going 10 yrs later. only put 302 heads on as i had them, you never had 302 clevo,s in u.s. you have to use alloy heads.
Those 300s are bullet proof. I bought one that sat in a e150 van for 5 years never started. Pulled it out to put it in my mud truck. Put a wrench on it and it was free. The oil pan was rusted out but my buddy had another one. The inside was clean no sign of wear at all. Got it in my truck and it fired right up. No noise didn't burn oil. I beat it for 2 years before I sold it had a new born and needed things for her. I paid 20 yes 20 for the engine. The guy who sold it to me said 20 if it ran and if it didn't I could have the engine and do with it what I wanted. It never left me stranded and I daily drove it for 6 mouths to work. Unfortunately getting 160 miles to a tank did suck but it was built to play in the mud. 3 inch lift, lockers, 4.11 gears and a 4 speed with granny low. The truck was a 82 f150 and man I miss that truck it was a beast in the mud and snow.
A little simple math tells me that thing was only on the road about 13 years. What a shame to park a short-bed, 4x4 Ford pickup at such a young age. Great rescue.
I give y’all credit for actually trying and saving this old motor unlike all these other “truck guys” that would jsut claim it’s dead and throw it away. Good job 👍🏼
Agree. A cylinder that has been badly corroded will always perform less than the other cylinders, if it works at all. The material lost by corrosion can't be recuperated.
I did the same thing to the stuck straight 6 I bought minus the hone, its such a nice feeling as the motor loosens up I reused the gaskets and mixed up all the pushrods, still runs pretty good !
Great video. 300s dont die. Id run a compression check after some run time to see if cyl 2 comes back to life. A good 300 can be anywhere from 120 to 180 psi. Ford spec is 25% difference from highest to lowest cyl reading.
Good score, don't think I've ever seen so many here wanting one of your finds as much as this one. I would offer 500$ and my blue heeler but gotta keep my dog.
im so old,...........im so old,..............im so,.....what was i on about........i love my 75 high boy....best std 4x4 built..[ chev cucv . dodge power wagon. . all the same ]
Awesome vids guys. I actually just dragged the identical truck out of the woods...1980 F150 Stepside 4x4, also with a 300 inline 6, also not running. I too go it going, and it purrs like a kitten. Thanks for the video, this was great stuff. Keep it up.
That thing looks like it was under water! That's a lot of rust! It looks good under the valve cover though, so if it was it didn't get in the crankcase. I have a torque wrench just like that one and it works good! That's racing clearance in that cylinder! It fired a little first crank! Yee Haa!! Give er hell til she blows! Always glad to see you post one up! I want to see the Comet fixed up nice like you did the Porsche next!
For what you do, as your day to day professional job, you need a good modern torque wrench. The head must be torqued to specs, ( exhaust manifold, the valve cover, water pump, everything else).Be careful not to over hone that one cylinder, you could lose compression, burn oil. This block could be re-bored with oversized pistons and new rings, however you said it had already been re-bored.
Never seen anything like this. You guys are masters. I'm bringing my 1980 back to life. Fortunately, the engine isn't seized. Still not running, but after seeing this video, have great hope. Great video.
I remember those old Ford Trucks and restored lots them in 2 or 4 wheel drive plus 6 to 8 cylinder types too! That wild see headlights flashing like that 😳 ! Yes 300 6 cylinder like 292 6 cylinders motor built tough and Granny 4 speed too also any differential gears are excellent too! Excellent video and work on too get drive that old Truck going too!
Gotta love the straight 6. And the flareside bed absolutely rules. Especially one that old, you get to do a wood floor, pretty awesome. Plus, the steps on the sides make for a super practical and useful truck..
My first ever car was a F1 1949 took the v8 side valve out put in a 1975 300 and a turdo no wast gate ,twine clutch, no synchro on first gear it could climb a brick wall.Turdo melted a piston blew the dip stick through the hood.
I just picked up an 83 stepside with a 302 last week but I'm gonna try to find a 90s fuel injection 300 straight 6 to put in it. Should make a fun mountain rig.
My first vehicle was a 83 f100 just like that one with a 300, 32 years ago,, you cant kill that 300,, looks like you have a good bed there too, good luck with it
Got a 85 F150 Flareside just like yours, gotta love that interior! Using a 302 Windsor instead, but man I hate that 1G alternator, bought 3-4 Rebuilt ones that went bad in two short years! Good thing is that the 3G swaps are plentiful! Hope you enjoy the flareside body, can't seem to find an aftermarket or oem style like that online, rare beaut!
I love an inline 6 engine. They are durable, torquey, and smooth. I had one in my first car, a 1971 AMC Hornet, and one in my current winter beater, a 2006 Saab 97x with the Atlas 4.2 inline 6. And come to think of it, one in my wife's BMW Z3.
You guys are the best....I absolutely love your videos. As a 48 year old guy, it's so much fun to learn from you guys. Your father is probably close to my age....I love the nostalgia of these kinds of vehicles.
you could probably run electrolysis in the vinegar(or other electrolyte) when you have this kind of problem. - on the block and a steel bolt connected to + in cylinder.
yes,i know,,our alien creators gave it to noah,,kept the didgital one for themselves,,cant give the kids real tools,,might hurt themselves....[ sumerian tablet vids. ]..
Yes, I know the video is a few years old but I've only recently found the channel. First thing of note - vinegar. It eliminates rust because it's acidic. However, you've got to remove all grease or oils BEFORE attempting to use it or you will find failure. Also, in spite of what some folks claim, it isn't a miracle product though it can remove rust under the right conditions. Vinegar is basically a very weak acid which is good because it works slowly. That means you're not likely to do further damage when you use it and you don't actually know what you're doing. With that said, because of the acid, you can destroy what you'd like to keep if it's used for too long. Check your parts once or twice a day if soaking for many days in a row. To isolate sections of a part that's soaking, use wax or duct tape to seal off the parts you don't want the acid to act on. Next, the lifters. Just cranking down the head bolts was a mistake even with the hydraulic lifter design. The easy way to ensure the lifters are adjusted is to get the engine up to operating temp and ensure that you've got good oil pressure by testing using a verified gauge. Grab some decent scissors, some duct tape and a cardboard box or two. Remove the valve cover(s) and use the cardboard to manufacture a loose guard to keep the oil from spurting all over your hands and the engine bay while the engine is running. You don't need to put too much effort into it - all it has to do is keep the oil flowing inside the rails of the head and back down into the block. Slice, dice and tape up the cardboard as needed. Obviously, part of the cardboard has to cover over the top of the rockers and guide the oil back inside the head. Have your guard built? Good, now fire up the engine and grab a ratchet and socket for the rocker nuts. At idle with a fully warmed up engine, back off each rocker nut until you barely hear a small tick occur. Listen very closely. Stop backing off the nut when you can barely hear the tick and tighten the nut exactly 1/4 turn. Do the rockers one at a time only! Go through all the rockers from one end of the head to the other TWICE. When you've done that, clean up the mating surfaces and replace the valve cover. You're done. This procedure works on pretty much any hydraulic lifter design engine so don't be afraid to use it if you have any doubt about your engine. The bottom line here is that even with hydraulic lifters, they've got to be in proper adjustment if you expect the engine to last. Too tight or too loose leads to catastrophic damage and expensive repairs. The least you can expect is bent pushrods and an engine that runs badly or not at all. Next, bolt installation. I cringed when you were installing the spark plugs and some of the bolts on the intake. I could hear the screeching over the audio on an intake bolt or two! Use a decent high temperature anti-seize on the threads of your spark plugs. Also on any bolts, nuts or screws that are near or on the exhaust system. Believe me when I say that you'll thank yourself for doing so down the road of life when you take things apart for maintenance or repairs. Use a regular anti-seize on all parts that don't need a high temp type. What type to use? Everyone has their opinion but I use a copper based type for a high temp anti-seize. I've never had an issue with it myself. For a regular anti-seize, a lot of folks prefer a nickel based type but I advise doing some research online and choosing what you think will work best for you. Opinions vary greatly and for many reasons but MHO is that it's best to use SOME type of anti-seize rather than not use one. Again, you'll thank yourself for doing so when you take things apart. Lastly, consider chasing all the threads on your hardware before reassembling the parts. Chase, clean and lube equals success. Peace & good vibes! - Max Giganteum
The 300 is my favorite engine. Putting a tractor engine in a pick-up was a genius move on Ford's part.
Yes it was as far as im concerned a tractor engine capable of town runs is an absolutely amazing idea for any pick up. They are work first pleasure sencond at the most. But i love my 5.3 chevy as a daily.
The real definition of Ford built tough I have the 94’ 4.9L inline 6 with 5 speed manual transmission and I gotta say that she’s a beast and she still got her full potential low end power
the 300 was a truck/car engine long before, ford just sold the engines to new holland and others
The inventor of the Duraspark ignition lives in Chapin, SC. I've met him, he's a pretty cool guy. Whe Ford shipped their 1,000,000th ignition box, they presented him with a gold plated Duraspark box mounted on a plaque. He has it hung on the wall in his shop.
I've driven hundreds of thousands of miles on Duraspark ignitions, and never had a failure! Tell that guy I said "Good Job!"
@@DanEBoyd I've only had age problems with mine. Other than that they're pretty decent.
I think the biggest problem with duraspark boxes is the cheap aftermarket ones…those are trash
I’ve had 4 of these straight sixes and they are nearly impossible to kill. My cab rusted out before the engine even had a cough. The bullnose was also my first truck. Great video man!
I've learned something new today: blocks of wood aren't just for holding your vehicle still anymore. And your wife's "That doesn't sound safe" is something I've heard the women in my life when it comes to working on my cars - I would just smile & say, "If I don't come back, that means you were right."
I'm looking forward to more - glad to hear you're pushing through these difficult times.
I've had a couple of Ford trucks with that 300 6cyl. They're tough little engines with plenty of torque.
Other people: engine is seized, yep it's dead
Budget Buildz: Now you take this effing log of wood and you hammer it in!!!
LEGEND
😄😄😄😄
Noticias@@BudgetBuildzEl vuelve
@@BudgetBuildz de que,,,
@@BudgetBuildz flat tops,rv cam,twin barrel,,kill any v8..
@@BudgetBuildz the rubber on the fire wall,,now thats rare. i swapped out my [ 75 highboy ],300 for a 351c, didnt know much about 300,s. bad mistake.. im in aus. i imported a 62 f100 4x4, 352 FE. not the y block., i think guy fitted a lot of a 65 to it. guards,door,bonnet. [ hood to you yanks ].. & cab as vin says f10,not f11. 4x4. good luck,stay safe..
That 300 straight 6 is one of my favorites, my first was a 89 f150 long bed with a manual and the 300. The torque that engine produced was Awesome!
One of the best in line 6's ever built (in my opinion)
Nahh that goes to the Jeep 4.0 but honestly I can’t think of a bad in-line 6, something about that set up just seems to work.
96 F150 4.9L 650k and still going strong.
@@sccarguy8242 yea I don’t know if there is a such thing as a not reliable inline 6
Agreed....the inline 6 is one of the most durable engine designs for toughness there is no matter the brand name on it.
Had a 170cid in line six in a 63 Comet...beat the tar out of it (teenager). Never missed a beat. Miss that ole motor..
Awesome! My Dad was a lover of the 300 in the F150. Got 680,000km (400,000mi) on his first one. You reminded me of some great memories working on the 300. Thanks for that!
Best engine Ford ever made in my opinion. Ive had several!
Man. Those torque wrenches were old when I was a kid. And now I’m retired. Good job fellas 😁
My father had the same torque wrench. That would have been 60 years ago.
We always called them Wonder Bars. because you wondered if you were reading correctly. I'm spoiled with the click style, Now people are spoiled with the electronic chime type.
Well, if it works, it works! :-)
@@XA351GT Fellow Australian spotted :-)
I have one of those in my toolbox, untouched for a hell of a long time after being replaced with a clicky.
I clicked the video simply because I like that body style with the stepside bed. I too love that engine. I have a 1975 f250 Hi boy with the 300.
77 F150 2WD long bed here, with the 300 - or might be a 240...
Nice work with that engine. A wooden log must not be missing in any workshop. I have also repair two engines this way. I'm glad you didn't give up right away and fixed the engine.
That's actually a pretty desirable truck, shortbox, stepside, reg cab and 4X4! Lol, in my younger years I would have been shopping for trucks like that 🤣
Love to see a compression test on the old girl to see how bad that one cylinder reads.
I always use brake fluid on rusty nuts and bores, it just eats rust like crazy- try it!
This is so cool! I love seeing these old trucks saved! You did a great job!
It is hard to kill those inline 6s. Great engines
luv the bullnoses...i have an '80 too. congrats on getting it going...that cylinder did not look good! 300 was one of Fords best...not too good on mpg, but that's not the point. hopefully there's some floors still in that ol' buzzard
there built for torque,,but to get better econ. fit a better inlet/out headers,flat tops,small cam, twin or 4 bbl carb. killer engine..i have a ,here in aus, a 351c with 302 heads,,on lpg only. 12.1 comp,std engine,no cam, its dangerous..still going 10 yrs later. only put 302 heads on as i had them, you never had 302 clevo,s in u.s. you have to use alloy heads.
yeah that will definitely run, the old 4.9 ltr straight six
Love the father and son relationship here and enjoyed watching you guys revive this old Ford! Subscriber here!
Those 300s are bullet proof. I bought one that sat in a e150 van for 5 years never started. Pulled it out to put it in my mud truck. Put a wrench on it and it was free. The oil pan was rusted out but my buddy had another one. The inside was clean no sign of wear at all. Got it in my truck and it fired right up. No noise didn't burn oil. I beat it for 2 years before I sold it had a new born and needed things for her. I paid 20 yes 20 for the engine. The guy who sold it to me said 20 if it ran and if it didn't I could have the engine and do with it what I wanted. It never left me stranded and I daily drove it for 6 mouths to work. Unfortunately getting 160 miles to a tank did suck but it was built to play in the mud. 3 inch lift, lockers, 4.11 gears and a 4 speed with granny low. The truck was a 82 f150 and man I miss that truck it was a beast in the mud and snow.
Well done. When it fired for the first time I totally empathized with you man. I love that feeling. Nice work.
A little simple math tells me that thing was only on the road about 13 years. What a shame to park a short-bed, 4x4 Ford pickup at such a young age. Great rescue.
With a full engine rebuild needing during that time with the block bored... Not exactly good.
@@alexyo3927 It definitely wasn’t maintained well in that time if it needed a rebuild. 300s are well known for their durability
Ain't nothing like a good old Ford 300 6 can't hardly kill them.
I worked in a junkyard 10 years. Every inline 6 that came in did not run
@@davidrubin1895 probably why they were there?
@@UncleRobsGarage I'll take a 302 anyday
@@davidrubin1895 302 is good!
Use lime away. It removes the rust quick and doesnt cause damage to the engine.
I love inline six engines! I have a GM 250, sounds awesome!
I love in the fast forward when you are torquing the head all the passing cars sound like f1 cars
I give y’all credit for actually trying and saving this old motor unlike all these other “truck guys” that would jsut claim it’s dead and throw it away. Good job 👍🏼
I am curious what the compression is, after it's been running for a bit
Agree. A cylinder that has been badly corroded will always perform less than the other cylinders, if it works at all.
The material lost by corrosion can't be recuperated.
Sweet old Ford. Those 300s are amazing engines. Almost impossible to kill
That piston turning tool is sold out at all my local parts stores
Try Home Depot.
@@Shane-Singleton I will
Lumberyard
i git the market on them,,i own all the trees in my town..
Nice. 1980 f-150 with 300 was My first truck when I was 17 back in 1987. Man... there wasn't one bolt untouched on that truck. Good video!
I owned an '83 Bronco with the 300 ci. A real stump puller and ran forever. Onward!
I did the same thing to the stuck straight 6 I bought minus the hone, its such a nice feeling as the motor loosens up I reused the gaskets and mixed up all the pushrods, still runs pretty good !
As soon as he showed what was under that hood I thought "it'll run."
Just started the video, haven't seen under the hood...guessing 300 L6.
@@Captain_Yodelstein You would be punctillius in assuming that...
Best motor that Ford ever made imo
My thoughts exactly 😂
Yup, second the hood opened I thought “straight six, should pop just fine”
I bought a F100 with the 300 CID engine brand new in 1978. Drove it for 14 years. Great truck and engine. Enjoyed your video on the 300 CID Ford...
Pretty cool that you got her going after being locked-up like that. 👍🏻
Great video. 300s dont die. Id run a compression check after some run time to see if cyl 2 comes back to life. A good 300 can be anywhere from 120 to 180 psi. Ford spec is 25% difference from highest to lowest cyl reading.
Good score, don't think I've ever seen so many here wanting one of your finds as much as this one. I would offer 500$ and my blue heeler but gotta keep my dog.
I'm so old I consider this Ford a late model.
lol right?
that aint no classic
@@dahlquist4045 I get you, to me it's a late model, but to be a classic a vehicle only has to be 20 years old, least ways according to the DMV
to Millenials, it's a classic.
im so old,...........im so old,..............im so,.....what was i on about........i love my 75 high boy....best std 4x4 built..[ chev cucv . dodge power wagon. . all the same ]
Hands down my favorite bodystyle of the f150 i want to build a 6cyl 4spd 4x4 one
Love to see you run a compression test and then put in engine restore and is if it improves the compression..
Awesome vids guys. I actually just dragged the identical truck out of the woods...1980 F150 Stepside 4x4, also with a 300 inline 6, also not running. I too go it going, and it purrs like a kitten. Thanks for the video, this was great stuff. Keep it up.
That thing looks like it was under water! That's a lot of rust! It looks good under the valve cover though, so if it was it didn't get in the crankcase. I have a torque wrench just like that one and it works good! That's racing clearance in that cylinder! It fired a little first crank! Yee Haa!! Give er hell til she blows! Always glad to see you post one up! I want to see the Comet fixed up nice like you did the Porsche next!
For what you do, as your day to day professional job, you need a good modern torque wrench. The head must be torqued to specs, ( exhaust manifold, the valve cover, water pump, everything else).Be careful not to over hone that one cylinder, you could lose compression, burn oil. This block could be re-bored with oversized pistons and new rings, however you said it had already been re-bored.
That is a pretty cool little truck. I like to see oldies come back from the dead like this, I think it should be done more.
**KNOCK KNOCK**
😳 “is that you Rodney?” Lol
Shame about that one cylinder, I guess the valves were both open on that one and moisture got it ...29 years of moisture...lol...well done...🤔🤔🇬🇧🇬🇧
All the epoxy oozed out of my Duraspark box and it still ran 4 years like that. Can't keep those old Fords down!
Those old 300 cid are hard to beat, especially with what I am assuming is a T18 granny four speed.
He literally said that
20:27 I love your down-to-earth demeanor. Who wouldn't grunt while climbing in like that?
I wouldn’t
Never seen anything like this. You guys are masters. I'm bringing my 1980 back to life. Fortunately, the engine isn't seized. Still not running, but after seeing this video, have great hope. Great video.
Drop the oil pan and clean it out too!
Quite a few of you guys out there saving motors now, it is great to see.
Had that same combo in an 86 F150. Man I wish I still had that truck.
This is my type of channel, let’s all work to get this channel up to 100k subscribers!
I remember those old Ford Trucks and restored lots them in 2 or 4 wheel drive plus 6 to 8 cylinder types too! That wild see headlights flashing like that 😳 ! Yes 300 6 cylinder like 292 6 cylinders motor built tough and Granny 4 speed too also any differential gears are excellent too! Excellent video and work on too get drive that old Truck going too!
Henry Ford himself used that torque wrench on his assembly line
You can still buy those torque wrenches, machine shops use em all the time
Yours is my perfect world, getting to mess about on old cars all days long and getting youtube to pay you for it. Top work!
Gotta love the straight 6. And the flareside bed absolutely rules. Especially one that old, you get to do a wood floor, pretty awesome. Plus, the steps on the sides make for a super practical and useful truck..
However, that thing is absolutely disgusting
My first ever car was a F1 1949 took the v8 side valve out put in a 1975 300 and a turdo no wast gate ,twine clutch, no synchro on first gear it could climb a brick wall.Turdo melted a piston blew the dip stick through the hood.
13:53 sounds like you’re sitting next to the Daytona 500 😂
Lmaoooo bro that’s hilarious
I laughed so hard ... Then played it again for the wife and we both laughed harder ... 😅
Looking into buying a 88 4x4 same engine with a manual transmission great truck I’ll give you a grand for it!
I just picked up an 83 stepside with a 302 last week but I'm gonna try to find a 90s fuel injection 300 straight 6 to put in it. Should make a fun mountain rig.
I had an 84 F150 just like this. Amazing first vehicle.
Engine locked, bhaaaaa thats fine! Lets go to the hardware store.
I love your undisguised joy at every triumph that you encounter 😁
My first vehicle was a 83 f100 just like that one with a 300, 32 years ago,, you cant kill that 300,, looks like you have a good bed there too, good luck with it
This reminds me of my first truck. Same power train and there is no stopping it. Would love to get it back. Thanks grate video.
Good video. I bought one just like that in 1980. It was not a 4x4, but everything else was the same. Beautiful truck.
Your enthusiasm keeps me coming back.
Well done ! Thanks to show us !! have a nice day !!
Love that patina
Patina lol give me a break ! It’s rusty crazy paint
I love this model!! 150 Custom from the 80s, look at those rear fender hmmm... these are the best looking truck eveeeer imo.
Got a 85 F150 Flareside just like yours, gotta love that interior! Using a 302 Windsor instead, but man I hate that 1G alternator, bought 3-4 Rebuilt ones that went bad in two short years! Good thing is that the 3G swaps are plentiful! Hope you enjoy the flareside body, can't seem to find an aftermarket or oem style like that online, rare beaut!
It's refreshing to see such an accessible engine bay. Not one packed with 800lbs of crap and an engine shoe-horned in it lol
This guy is positivity itself, when others just see the grass and bushes coming up through the floor he says it's actually quite good.
My favorite pick up in my dad's fleet of work trucks was a baby blue 1960 Ford 1/2 ton with a 223 and 3 on the tree.
I love an inline 6 engine. They are durable, torquey, and smooth. I had one in my first car, a 1971 AMC Hornet, and one in my current winter beater, a 2006 Saab 97x with the Atlas 4.2 inline 6. And come to think of it, one in my wife's BMW Z3.
Inline 6 with a manual will always run
Great video, love old 6 I have a 87 with a c6 transmission with dual fuel tanks . Great looking ford you have..
29 years old... Great work. Thanks to share.
I'm actually doing a basic rebuild on my 300 right now
flat tops,twin bbl carby,,headers,,you wont know it...
Me to on my 84 300 strait six t18 Borg worner 4 speed 9 inch rear end the most bulletproof running gear ford ever made
That torque wrench ws from back in the day.... ahhhhhhh I'd give anything for those days again. 😔
Love that truck and the inline 6 engine is one of fords best engines.👍👍
You guys are the best....I absolutely love your videos. As a 48 year old guy, it's so much fun to learn from you guys. Your father is probably close to my age....I love the nostalgia of these kinds of vehicles.
Great video😀👍
Great too this truck alive again, nice too see it have miles and km😀🇳🇴
Old cars and trucks never die, just someone too save it😀😎
That's a cool looking truck ,l like the wellside trays/tubs on these things.great video 👍 from Australia
I just found your channel, but I love your excitement and personality!
Thanks so much!! Glad to have yah 😃
I really enjoyed that video, that was brilliant! Keep up the good work Michael, your channel is getting better and better!👊🏻😎
you could probably run electrolysis in the vinegar(or other electrolyte) when you have this kind of problem. - on the block and a steel bolt connected to + in cylinder.
Had a 67 F100 with a 300 and I wish I still had it. Great engine!
That was the same torque wrench used on Noah's ark.
yes,i know,,our alien creators gave it to noah,,kept the didgital one for themselves,,cant give the kids real tools,,might hurt themselves....[ sumerian tablet vids. ]..
Awesome! I like the details you give as you go thru your projects.
That pickup just screams 351 Cleveland
Yes, I know the video is a few years old but I've only recently found the channel. First thing of note - vinegar. It eliminates rust because it's acidic. However, you've got to remove all grease or oils BEFORE attempting to use it or you will find failure. Also, in spite of what some folks claim, it isn't a miracle product though it can remove rust under the right conditions. Vinegar is basically a very weak acid which is good because it works slowly. That means you're not likely to do further damage when you use it and you don't actually know what you're doing. With that said, because of the acid, you can destroy what you'd like to keep if it's used for too long. Check your parts once or twice a day if soaking for many days in a row. To isolate sections of a part that's soaking, use wax or duct tape to seal off the parts you don't want the acid to act on. Next, the lifters. Just cranking down the head bolts was a mistake even with the hydraulic lifter design. The easy way to ensure the lifters are adjusted is to get the engine up to operating temp and ensure that you've got good oil pressure by testing using a verified gauge. Grab some decent scissors, some duct tape and a cardboard box or two. Remove the valve cover(s) and use the cardboard to manufacture a loose guard to keep the oil from spurting all over your hands and the engine bay while the engine is running. You don't need to put too much effort into it - all it has to do is keep the oil flowing inside the rails of the head and back down into the block. Slice, dice and tape up the cardboard as needed. Obviously, part of the cardboard has to cover over the top of the rockers and guide the oil back inside the head. Have your guard built? Good, now fire up the engine and grab a ratchet and socket for the rocker nuts. At idle with a fully warmed up engine, back off each rocker nut until you barely hear a small tick occur. Listen very closely. Stop backing off the nut when you can barely hear the tick and tighten the nut exactly 1/4 turn. Do the rockers one at a time only! Go through all the rockers from one end of the head to the other TWICE. When you've done that, clean up the mating surfaces and replace the valve cover. You're done. This procedure works on pretty much any hydraulic lifter design engine so don't be afraid to use it if you have any doubt about your engine. The bottom line here is that even with hydraulic lifters, they've got to be in proper adjustment if you expect the engine to last. Too tight or too loose leads to catastrophic damage and expensive repairs. The least you can expect is bent pushrods and an engine that runs badly or not at all. Next, bolt installation. I cringed when you were installing the spark plugs and some of the bolts on the intake. I could hear the screeching over the audio on an intake bolt or two! Use a decent high temperature anti-seize on the threads of your spark plugs. Also on any bolts, nuts or screws that are near or on the exhaust system. Believe me when I say that you'll thank yourself for doing so down the road of life when you take things apart for maintenance or repairs. Use a regular anti-seize on all parts that don't need a high temp type. What type to use? Everyone has their opinion but I use a copper based type for a high temp anti-seize. I've never had an issue with it myself. For a regular anti-seize, a lot of folks prefer a nickel based type but I advise doing some research online and choosing what you think will work best for you. Opinions vary greatly and for many reasons but MHO is that it's best to use SOME type of anti-seize rather than not use one. Again, you'll thank yourself for doing so when you take things apart. Lastly, consider chasing all the threads on your hardware before reassembling the parts. Chase, clean and lube equals success. Peace & good vibes!
- Max Giganteum
Great job ... 👍👍👍👍👍 I love this kind of trucks ... She's wonderful .
that's awesome guys, makes me wish I still had my older 3 hundred six cylinder ford trucks, mine are all early to mind 90s ford f150s with 302s EFI
That's a classic style.. honestly one of my favorite bodies of all time
This thing has been sitting longer than I've been alive.
Same here I'm only 26
Same I'm 20 years old so most revivals are
Lol, plebs. I am 15 :D