Making 20000 RPM BLDC Motor
Вставка
- Опубліковано 30 січ 2021
- #creativethink #bldc #motor
i am show about making 20000rpm powerful brushless dc motor. the copper coil coil winded on pvc pipe. this project using magnetic rotor. the motor run wit external bldc control circuit board.
-------------------------------------------------------------------------------------------------------------
Components Link :
1. Shaft (6mm)
amzn.to/38IRkXS
2. Ball Bearing
amzn.to/3gZKxvZ
3. Copper Wire (.91mm)
amzn.to/3nNSUib
4. bldc controller
• Video
-------------------------------------------------------------------------------------------------------------
Facebook Page:
m. creativethinkg...
Instagram:
/ creativethinkgr
Twitter:
Creativethinkgr?s=09
UA-cam: / @creativethinkideas - Наука та технологія
I don't know why, but I started watching people do electric engines.
Because you probably got tired of paying those electric bills for something that's everywhere, infinite and free.
Excellent! Gracias. Thanks. Merci. 🙂🙏🏻💚
удивительно что зазор между магнитом и катушкой очень большой но мотор всё таки работает ! Молодец парень хорошее видео !
Пожалуйста, посмотрите этот стих
Откровение 14:12
12 Здесь терпение святых, здесь соблюдающие заповеди Божии и веру в Иисуса.
@@giovannicorraliza4393 нечем заняться ! Мне не пиши коментариев
@@giovannicorraliza4393 о0?
@@giovannicorraliza4393 ты тупой да или да?
One word, insane.
thankyou genius
Hi janu,,,
Can you make one just the size of a real motor? like those that stand in motorcycles (the same size to make).??
U ve fitted bearings but the white plastic shaft is causing a lot of friction wth bottom surface .Keep the windindin part verticle rather than horizontal n see the results.
Very nice and easy 👌👍
am building a a 34 " Tunnel hull boat I think this will work perfectly
yesssss 3 plane and 2 plane like this 👍👍👍.
20,000 RPM my ass - but thanks for the tutorial ;)
I doubt there's even 2000 there.
You are genius
So creative 😊
So very good jabardast maind.
Good sense of astethics.
Did you check the RPM?
Suggest a practical application for this project, that would be nice!
Practical application:
1.We can make smooth 6/7 Dof
Robot arm/manipulator...
2.car
3.drones..etc
The pvc will melt easily, this can only be a prototype
Rc plane
Not more than 2k
Very nice construction. May I know where to buy PVC sheets?
Can we make drone using this motor
I would like to know the connection of the solenoid wires. Thank you
Can I run with two wire by using a 12v dc power supply
Tendria que girar mucho mad roza o el rotor muy liviano
Thanks your video👍
Amazing broooo nise
First like and comment are from me
How many volts we can use for the motor?
Super Bro I like this video 📹
Need help maybe you can help me I need a wind turbine half a meter long. Got any idea where I can get one.
thanks
How you have arranged the polarity of coils? N S N or S N S ? In either case two similar poles are adjacent.
I have not watched it yet and i do not know if his motor is legit but coils dont work like that. If the 3 coils are electricaly 120° out of phase with each other it will create a continuous spinning magnetic field. The magnets inside pretty much acts as one big magnet that anchors on the spinning field of the coils.
I see where you are coming from tho, in brushed dc motors coils can only have 2 polarities and a single supply voltage that is just reversed.
@@spageti6640 as you mentioned, how it is even possible to make DC 120 degrees out of phase electrically? Are you not confusing between DC and three phase AC? Kindly study AC Induction motor theory and also DC motor theory. Thanks.
That's where the controller comes in boys That's the whole point of a BLDC controller or an AC 3 phase inverter as opposed to a single phase three pole inverter I mean you seem to have no concept of the topic of which you're discussing and I'm not trying to be rude I'm simply trying to point out that one of you clearly knows electrical engineering The other is clearly learning about electricity as a source of energy, don't you find it more interesting that neither one of you seem to understand the concept of why the other ones thoughts don't work and whether or not something is legit. The reason this works is a the outer coils do lock in phase with the inner coils however you have a controller that systematically and on the nanosecond or possibly even Pico's second level switches the polarity of the inner coil back and forth from north to south reversing poles instantly And does this hundreds of thousands if not millions of times during the rotation of the stator which transfers to mechanical energy which allows you to move something it's all in the controller board as to how fast and which poles get flipped at what time The point is when it locks phase with the inner coil and that inter coil rotates to turn and lock up it switches on it that instant to turn yet again and continue the motion. The chips on the board the transistors the variable resistors or potentiometers used all point to what coil gets flipped and when and how fast that causes the mechanical energy to occur at a higher rate or a lower rate but with more force from the magnetic field building up. 😊
SIR FIRST LIKE
Great
Хорошая, познавательная работа, но обмотка такая ужасная( можно было чутка другим способом сделать и по аккуратней( и лаком их не покрыл(
what kind of battery did you use?
Ye controller ke baare me kutch nehin bataayaa? Binaa controller aur sensor ke keise chalegaa BLDC motor?
why did you not put iron at the centers of each coil to amplify the magnetic field and direct it. thats going to be lioke 30x weaker!
yeah! also I would have asked the same
3:39 why 60 turns specifically?
nice bro😷
the big question is,,,
'how we get the magnet ?' or
'how we make the magnet ?'
Cómo es la conección de las bobinas .gracias
Motar drivar k bager chala sakte h kya
Brother Can I use this motor in an electric skateboard?
Hi,
I got a thinking,
Since u able to make so many free energy or rotor,
Why dont u try to make all ur rotor into a drone,
Add in blade,
Make the drone that able to fly with free energy ?
Haha..
Please using dinama 3 phasa . Please
Super!
How I can know max and min range of voltage for my hand mad motor, how can I Calc at and based on what ?
how do i arrange the wires? Do I have to use the same wire for all coils, or do I do it separately?
bldc works on three phase so three separate winding need
The 3 coils are connected in a "wye" configuration. I just got done studying bldc motors in college lol
@@beawareofthegreatjjs what does a "wye" configuration mean?
If u put an aerofoil wing on it it gonna fly
Nobody else can't even think of rhat
Connection ke baare me bataayaa nehin?
I don’t think most pepole ever built a brushed motor but with titanium connected to the rear maybe it will last longer?
Good toy:)
Hai scoperto l'acqua calda?? Sono anni che esiste questo motore non è una novità!!!
how come both pipe are 42mm ??
Motor: $5, ESC: $50-$100... "To increase margin add value..."
Can u plz make a drone with this motor
भाई आप भारतवर्ष 🇮🇳🚩से हो क्या🙏🏻☝🏻🗡🌍🚩💎🚩 यदि हो तो उत्तर देना कृपया 🙏🏻🇮🇳
NATARAJ scale is available only in India.. Jai Hind. 👍
Brushless? I hope it’s powerful
kyaa ise haat se start karnaa hogaa kyaa?
👍👍👍👍
Listen I have wound like 50 coils I'm watching your videos I'm making these things with a perfectly aligned at the right degrees and I cannot get a motor to spin I'm so frustrated I have neodymium magnets a ton of them please if you could help me with this project I would appreciate it more than I could tell you maybe my coils aren't big enough I have no idea but please help thank you
you using ESC? don't try to recreate off a youtube video that gives no details go find a real tutorial. this is a showcase.
Appreciate your effort, on contrary its not of 20000 Rpm. Please review your specs its an extra over estimation. Rgd Iqbal, Karachi
I love these
Great..But which gum did you use? Where do you get the PVC sheet and where can you buy the copper wire and controller
Sir if possible make 775 dc motor thanks
Good
Good sir
Awesome
Good 🇮🇳👍 Kuki
Reason to use ferromagnetic sheets core is to increase the strength of megnetic field , you using PVC core and think you will achieve 20000RPM no it will not work
wow emezing
Eingonda Takpagi Utpa Oiramlady ?🙇
How Many Coiling ?🙏
connection details nehin dikhaayaa?
Kalo buat yang AC bang gimana. Dengan model yang sama
যে কোন তিনটা জোরা দিলেই হবে?
Very op
When Wrapping the Copper How Do I know Which set of Wires will be the in/out? Or does it matter?
Polarity can be reversed but it looks like he wrapped the coils clockwise so if positive was on the right it will make a south pole facing the rotor magnets. Look up the right hand rule of induction to better understand how it works
@@916619jg Thank you so much
Please make it without a ball bearing
Brash bush Alternative
स्टार्टर लगाइए
👍👍👍👍👍👍
Is the best
It's available?
I want to know from you, where do you get the shafts, that too cut to the perfection, whether do you prepare these shafts? Let me about these shafts. Where these shafts are available?
This fella is really into shafts
Those are basically nails, cut of the heads and tails, there it is the "Shaft"
@@chrishayes5755 hahahahahahahagaha
Mind nice
It can fly?
Control make eppadi panna
I will try soon
Too much Gap between magnet and coil ,should be less than 0.2 mm
Just know how to post it. turn the disc my brother
Kitna wat h
It's a vibrater
لك عاش خهههه😍
can I put this motor in the 220 v outlet ?
No , only using 12v dc
Ok felicitari
20000 rpm ?????????????????????????????????????????
Hi bro why can't u make a bigger one bro
How to calculate wire guage and turns for bkdc motor
Start with 0.5 mm wire for one horsepower and work your way up from there my friend, these vids never tell us enough 😢
And you fit as many turns as you can!
Первая трубка 42 и кольца 42,по моему какое-то фуфло.
He intentadp con los imanes mover un motor pequeño... no me sale !! 😅😅😅 Que es lo que faltará !!
Tener bien en cuenta la dirección de los pulsos
103.5 FM ( mm. Of Copper )
How to join copper link