Download gerber here: www.mediafire.com/file/ckeik632ih1p9hl/EGS002+TLP250+FN_2023-03-22.zip/file . If you want to buy Eagle cad file. Contact me by email : Magnetron0989821611@gmail.com
I did build this circuit it has one problem it cannot detect on the under voltage on pin vfb. over voltage yes work ok. the vr1 you have not mentioned your reference at the test point. I've also made the original circuit from EGS page number 8 ,6.4 EG8010+TLP250 Sinusoid inverter found it work better. it doesn't make sense I need to look more into it . the only difference is you can trim the over current according to the shunt you choose.
@@nikolaypolevoy8962 hi Nikolay I used EGS page number 8. 6.4 with the Circuit of tlp 250 as a Rough Guide and then I used toshiba's website to calculate the exact resistor to drive the tlp250. I have made both boards one with the variable input current and one which is standard without both boards are working but I find one is misbehaving slightly different than the other one which I haven't had time to have a look into it. That's where I got most of the reference for the SMD resistors and capacitors. The issue that I'm having is one of the designs it doesn't detect on the voltage everything else works I suspect it's a faulty microcontroller which I haven't had time to change but I doubt it.
Hi and thanks for the great work you on all your videos. I have tried emailing you on to get the schematic but have not had a reply in over 3weeks. Happy to pay
@@PhdHung I don't really want to post my email on here. Can you provide a link to the schematic? I have already purchased the PCB's from JLPCB and cannot proceed.
Have given up asking for schematic and reversed engineered from PCB only to find errors with the PCB posted earlier. With all due respect if you are going to supply Gerber files, please ensure that you supply the correct versions along with schematics. Some people who do not have engineering skills could make lethal mistakes when dealing with inverters and all of us need to do the right thing when posting projects online for others to use. Fortunately this particular board when used on it's own is safe and all I wasted is time and a little money on your incorrect gerbers.
Hi bro, great one. I emailed you but you didn't respond, so unable to reach you. I need the Gerber file to be able to order it on JLCPCB. I'm willing to pay please. Unable to order through the link to Jlcpcb that you posted. Thanks.
Hello good job,perfect project,can you share( tny290 +eg8010+tlp250 )version spwm file to me,i trying to work on your last 3000w project and need that spwm version project.tanx
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Anh em nhắn FB "Điện tử HT-Electronic" mua mạch nhé. 180K 1 cái. Còn 1 mớ mạch mà lười làm video quá. hehe 😁
One pc how to send India
Hey bro please share updated version of arc welding machine
Been waiting for a long time
i would like to make it
mình ko thấy link mua mạch :(
@@havn90 ?
English plz
Download gerber here: www.mediafire.com/file/ckeik632ih1p9hl/EGS002+TLP250+FN_2023-03-22.zip/file . If you want to buy Eagle cad file. Contact me by email : Magnetron0989821611@gmail.com
Thank you ❤
Hi dear brother need parts list please
almost a month since we've been waiting for you. Thanks again for sharing this project with us. An important, brilliant project
I want the schematic please..😢
I did build this circuit it has one problem it cannot detect on the under voltage on pin vfb. over voltage yes work ok. the vr1 you have not mentioned your reference at the test point.
I've also made the original circuit from EGS page number 8 ,6.4 EG8010+TLP250 Sinusoid inverter found it work better. it doesn't make sense I need to look more into it . the only difference is you can trim the over current according to the shunt you choose.
Do you have the parts list for resistor and capacitor values for smd.
@@nikolaypolevoy8962 hi Nikolay I used EGS page number 8. 6.4 with the Circuit of tlp 250 as a Rough Guide and then I used toshiba's website to calculate the exact resistor to drive the tlp250. I have made both boards one with the variable input current and one which is standard without both boards are working but I find one is misbehaving slightly different than the other one which I haven't had time to have a look into it. That's where I got most of the reference for the SMD resistors and capacitors. The issue that I'm having is one of the designs it doesn't detect on the voltage everything else works I suspect it's a faulty microcontroller which I haven't had time to change but I doubt it.
hi thanks for answering .needed for Make EGS002 TLP250 V2.0
Hello Yannis, can you please share the smd Parts list for the V2 please? I'll like to make it. Thanks.
Very nice Enhancement version of spwm Driver
I would like the electrical connection diagram, I want it to be adapted after the egs002 or the totem pairs
Liên tiếp lên video đi ad ơi. Hóng gãy hết cổ rồi !
Hi and thanks for the great work you on all your videos. I have tried emailing you on to get the schematic but have not had a reply in over 3weeks. Happy to pay
My email is hacked. Send me your email, I will reply.
@@PhdHung I don't really want to post my email on here. Can you provide a link to the schematic? I have already purchased the PCB's from JLPCB and cannot proceed.
Hi can you please post the schematic or supply another way to contact you as I have the pcb waiting to load.
Very nice dear brother 👍
I made this module please tell me R5 velue?
Is 2nd smd transistor 100-06 means mcr100?
Hi Sir please share the file
Bro, do you mean that it can drive 24 mosfets without totem pole drivers? or totem pole driver still needed? Thanks
We can't purchase this module from shoppee, can you share its link to Ali Express,
Thanks
Sorry, I don't sell on AliExpress
there are part numbers on the board and where to see the resistor values of the capacitors
Parece que ele fez só para ele, deve ser por não funciona. E por isso que ele não compartilha e nem vende.
Nice 👍
Do you have the parts list for resistor and capacitor values for smd.
Já que começou compartilha por favor ou vende
Does it work for 20 khz also 350 dc to 220 v AC
yes, work ok
@@PhdHung waiting for digital ac stabilizer
Sou seguidor deste canal, Legal gostei muito neste projeto, pretendo montar para meu uso.
Rất hữu ích 🙏🙏🙏👍👍👍
Só parece............
I want all this, how can i buy those? please
Have given up asking for schematic and reversed engineered from PCB only to find errors with the PCB posted earlier. With all due respect if you are going to supply Gerber files, please ensure that you supply the correct versions along with schematics. Some people who do not have engineering skills could make lethal mistakes when dealing with inverters and all of us need to do the right thing when posting projects online for others to use. Fortunately this particular board when used on it's own is safe and all I wasted is time and a little money on your incorrect gerbers.
you mean, his work is defective? does not work at it should? thanks much
It's suitable for low frequency or high frequency inverter?
All ok
Não serve para nenhum e só feik
Why you not upload still digital voltage stabilizer
I'm quite busy. I will upload soon.
Oga, well done sir you promised to release the atmega8 version of this board please when will that be sir.
Tem anúncio no AliExpress? Quero comprar 2 peças. Estou em Brasil
Awesome work as usual. You are deserve for donation/support. I don't have PayPal registration. What are other sources to donate you.
Linhkienkichdien.com
Bro, can it handle 24 mosfets without totem pole drivers? or totem pole driver still needed? Thanks
Can you add egs002 display to this one
Hi bro, great one. I emailed you but you didn't respond, so unable to reach you. I need the Gerber file to be able to order it on JLCPCB. I'm willing to pay please. Unable to order through the link to Jlcpcb that you posted. Thanks.
Ủa, kênh này của em luôn hả,
Vâng a
bo này dùng thạch anh loại bé tí vậy bạn?
It is difficult to buy already programmed egs8010
EG8010 has been uploaded to the program.
@@PhdHung you mean I can get already programmed eg8010 from AliExpress?
Onde consigo o arquivo para fazer a plaquinha?
Actually what is the criteria of calling it a fake?
Con Diode D1 là 1N4148 hay là Zener vậy a?
zener b
@@PhdHung Cảm ơn a :)
Can we purchase it from AliExpress,share the link
Lên luôn boar kích ad ơi
Can i buy gerber
Ola passa relação das pecas smd, Porque se não poder compartilha fica sem utilidades este projeto, responda ai por favor.
Awesome bro 😯 can you share file ? ?
share gerber bro.
@@PhdHung can't find any link in description 😕
coment bro.
@@PhdHung oh sorry my bad 🤣😅 didn't saw it till now
Thank you 💗 got it
So o gerber sem relação dos componentes não resolve, compartilha aí por favor.
Hi brother. Can share pcb and information. I can't shop in my country .
I'd be happy to share if you email me.
Còn CB Ko shop
Please share components list.
👍👍
😍😍😍😍
Hello good job,perfect project,can you share( tny290 +eg8010+tlp250 )version spwm file to me,i trying to work on your last 3000w project and need that spwm version project.tanx
Olá compartilha a relação de peças smd, pode vende ou tira do ar esta egs v2.0 porque aí fica so com vc, esta compartilhando só pela metade.
Ele não responde, mais tenho esperança q ele compartilha para o projeto ficar completo
Dirección para comprar
Hi Sir please share me the Main PCB bottom mosfet PCB file more helpful.....
Tem como mandar uma dessas pra mim ?
Kalo di jual TLP 250 & inverter nya 1 paket, berapa, tanpa travo
ништяк
Hi friend plz send me pcb components detail
Hi friend plz share comments detail
,sir i want to see the schematic if do you have, please upload one 🥹
Sell me the gerber. I cant reach you
It’s not fake. It’s just not original. China copies China, what a surprise)
No component value? That's disheartening bro