Dude you just keep raising the bar and improving your skills with each video... you're gonna have one bad ass machine once she's all said & done. I can't wait to see what's coming next in Puddinland !!!
Not boring, dude. Any build has hundreds of these tasks. Thanks for sharing your approach to them. Nice design on the retro console, it looks right. All done very thoughtfully. Hope the hoof heals soon, glad it’s not getting you down too much. Stay well.
once again, I'm amazed at your fab skillz that you think are no big deal. It's fun to see how you figure how things work and make a modern solution that looks old.
I really like the looks of that console. Blends well with a minimalist, period looking vibe. Don't be surprised if you get orders to build more of them. You should submit this build to Deboss Garage virtual build contest. It could only yield you more YT subscribers.
Definitely not boring, your videos are part of what helps us get through this lockdown. and motivates me to work on my car. I just finished a Bluetooth receiver that I mounted in my factory 1951 ford radio, it looks stock but uses the volume knob and preset buttons to control the Bluetooth receiver
You should make several more of these and sell them. I could see them in everything from an old hot rod to a mid 60s sedan/wagon in front of the bench seat. Great work!
"Not an exciting video" (you say in the intro) are you serious it doesn't really matter what you do although I love what you do your personality is what's winning over this channel. Keep it up all your videos are great!
That center console looks bad ass! I really like the angled bead role, bummer it's hidden below the seat. Coming together amazing, might just have to try and see this thing at a car show some day. Bit of a hike from the Westcoast, but would be worth it! Thank you again for the great content!
Ya watching your videos won't finish my project... Just kidding man I really think you are a cool guy And you are an amazing Fab man. Have a great day man...
I would suggest adding some vents for airflow because the stereo gets hot when you’re running them, possibly and AC vent to it depending on how hot it gets
I know this is just my thought don't mean anything bad I like the build it's looking good. Buuuttt aaasss far as the console not a fan now a secret place in the dash along the lower part cut it and make it hinged to go up or down and make mounts for the radio and HVAC and the other jacks. I took another look at your dash and wear the radio is now would be perfect it looks like a door now. Take and cut the old radio and mount it like it's still in but it's just the front of it. Sorry just me thinking out loud. Oh for most cars and trucks cup holders is a future thing now an ashtray yeah.
That’s okay everyone’s welcome to an opinion. I cut the radio face off the one in my truck and welded all the little piece together so it looks like a radio still. I stuffed speakers up under there. I considered it. I done hidden compartments before on vehicles and from experience of actually daily driving my stuff know it gets old. I real daily my vehicles too. I don’t want to be driving and see the the middle of the dash flipped up or down. I’m not a fan of center consoles myself but I’d rather have this one then something like that. The white Travelall I had some one actually deleted the radio and hinged the center piece (it was very janky) but still from that alone I know I wouldn’t be happy with that. This is for the drivability and what I need to utilize for road trips and everything.
@@PuddinsFabShop Like I said MY thought. I didn't know you had all ready been there done that. OK now the ashtray or cup holder LOL. I'd go with the cup holders also.
Dude you just keep raising the bar and improving your skills with each video... you're gonna have one bad ass machine once she's all said & done.
I can't wait to see what's coming next in Puddinland !!!
Probably a vacation! Lol
You say your not a sheet metal fabricator but your kidding your self you are a true talent
Thanks!
Everything’s looks awesome, like the console and a/c cover, progressing very nicely 👍
Thank you mike!
I’m sure I speak for everyone when I say
We enjoy your videos regardless of content.
Love how the cup holder looks like a smile face. LoL
wow here i see a very reserved Punnin.....glad you let us see more of the real puddin personality.
Super cool - Never Boring - that's the way you roll......... 👍👍
👊🏻👊🏻👊🏻👍🏻
Not boring, dude. Any build has hundreds of these tasks. Thanks for sharing your approach to them. Nice design on the retro console, it looks right. All done very thoughtfully. Hope the hoof heals soon, glad it’s not getting you down too much. Stay well.
Thank you! I’m happy with how it turned out! Thanks, I’m done with the boot now 👍🏻
First appearance of the glasses love it.
That console is awesome 😎
👊🏻
Looking forward to seeing more videos puddin. Keep up the great craftsmanship and hard work my friend. Fab On Weld On Keep Making. God bless.
once again, I'm amazed at your fab skillz that you think are no big deal. It's fun to see how you figure how things work and make a modern solution that looks old.
Thank for watching and the kind words as always!
I need one of those center console's for my Interceptor. That thing looks sweet!
I really like the looks of that console. Blends well with a minimalist, period looking vibe. Don't be surprised if you get orders to build more of them. You should submit this build to Deboss Garage virtual build contest. It could only yield you more YT subscribers.
totally agree!
I’ll have to look into that!
Another GREAT video. Your fab skills are great and it is going together nicely.
Thank you!
Looking great
Nice work man,diggin all the details and all the metal work you do.Cool channel and I’ll be keeping up wit your builds.👍🏼
Thanks! I appreciate it.
The design is really really nice. For a guy who does not enjoy steel sheet work you sure know your ways! 🙌🏻
My way is to just dive in!
Love the boot lol
That centre console is a work of art! Well done.
Like always, nice work
Thank you!
Good Looking project & work.
Stay real.
👊🏻👊🏻👊🏻thanks
Definitely not boring, your videos are part of what helps us get through this lockdown. and motivates me to work on my car. I just finished a Bluetooth receiver that I mounted in my factory 1951 ford radio, it looks stock but uses the volume knob and preset buttons to control the Bluetooth receiver
Very cool!
Not boring at all! Gotta show all that little stuff....it all takes skills and time
Thanks!
Great job. It's looking good 👍👍🇨🇱
Thanks Shane as always!
FANTASTIC!
Looks great!
Lots of progress looking good!
Thanks!
It's looking good 👍
👊🏻👊🏻👊🏻👊🏻👊🏻👍🏻
Looking good
Thanks peter
@@PuddinsFabShop 😊👍
You should make several more of these and sell them. I could see them in everything from an old hot rod to a mid 60s sedan/wagon in front of the bench seat. Great work!
I didn’t even remember what’s in this video lol
@@PuddinsFabShop ,sorry, I was referring to the center console. Lol,
Great Progress. Im going back and rewatching you shoebox series.
Thanks for watching!
"Not an exciting video" (you say in the intro) are you serious it doesn't really matter what you do although I love what you do your personality is what's winning over this channel. Keep it up all your videos are great!
Doing good job on travel all I would have done the same improvement to it if it was mine killing it brother
just catching up,great content man,Thx
Liked the center console.
Thanks Robert!
That center console looks bad ass! I really like the angled bead role, bummer it's hidden below the seat. Coming together amazing, might just have to try and see this thing at a car show some day. Bit of a hike from the Westcoast, but would be worth it! Thank you again for the great content!
Thanks for watching through!
Looks like it’s gettin close to done
Fractured foot? yeah, kickin' ass has it's drawbacks! LOL
That thing is coming along nicely, going to be very cool.
Thank you! I’m excited
Great job on the console.
Nice work and design on console.
Ya watching your videos won't finish my project...
Just kidding man I really think you are a cool guy
And you are an amazing Fab man. Have a great day man...
Great work! I like the idea of the console. Getting close to the end! What’s next!?
Rear sway bar, air intake, disc brake rear and separate body from frame to start cleaning and paint everything
Puddin's Fab Shop sweet man!! Need to send Nicole back up there so you can put her to work! Haha
She’d probably sit around and watch tik toks lol
Listen tortellini, if I can spell your name right you can spell mine.
Nichole Warner Haha. I knew that was coming!
Great video
Blocking off the cowl intake to keep the water out was a good idea. I have thought about that as well.
I hope it helps!
Nice ride.
Nice updates.
Thanks Tall guy.
A cooling line around the drink holders would be "cool".
Great job on the console
I would suggest adding some vents for airflow because the stereo gets hot when you’re running them, possibly and AC vent to it depending on how hot it gets
I think it will be good. Time will tell!
Puddin's Fab Shop it looks really good by the way
Thank you!
Ya talented bastard!
Great work man.
Thanks!
That console is pretty cool man
Im not bored. Hey it's alright cuz it's midnight. ❤
Really like those thresholds in the travelall , I work on internationals everyday but they are not that cool.
These things are neat.
Get it together, Grandpa.
🤷🏻♂️
Love it when you work on the American projects fords international Chevy dodge that’s right
Hey check vintage air. i was looking, I think they have an AC controls that would work. you gotta dig around. let me see if I can find it
I know this is just my thought don't mean anything bad I like the build it's looking good. Buuuttt aaasss far as the console not a fan now a secret place in the dash along the lower part cut it and make it hinged to go up or down and make mounts for the radio and HVAC and the other jacks. I took another look at your dash and wear the radio is now would be perfect it looks like a door now. Take and cut the old radio and mount it like it's still in but it's just the front of it. Sorry just me thinking out loud. Oh for most cars and trucks cup holders is a future thing now an ashtray yeah.
That’s okay everyone’s welcome to an opinion. I cut the radio face off the one in my truck and welded all the little piece together so it looks like a radio still. I stuffed speakers up under there. I considered it. I done hidden compartments before on vehicles and from experience of actually daily driving my stuff know it gets old. I real daily my vehicles too. I don’t want to be driving and see the the middle of the dash flipped up or down. I’m not a fan of center consoles myself but I’d rather have this one then something like that. The white Travelall I had some one actually deleted the radio and hinged the center piece (it was very janky) but still from that alone I know I wouldn’t be happy with that. This is for the drivability and what I need to utilize for road trips and everything.
@@PuddinsFabShop Like I said MY thought. I didn't know you had all ready been there done that. OK now the ashtray or cup holder LOL. I'd go with the cup holders also.
I hope that didn’t sound rude just trying to let you know I did consider it quite a bit.
👍
Here ya go
If you could create a process to multi make those every classic truck guy would buy one
I could definitely come up with something
nice console
you can probably sell the center consoles. :)
Maybe. A lot of work into one though.
@@PuddinsFabShop yea, thats the problem this stuff is a LOT of work. People don't appreciate how much goes into this!
I want one of those consoles
Build ya one!
@@PuddinsFabShop I plan on it. I been a sheet metal mechanic for over 35 years. Never thought about one of those.
What happened to your leg old man
No carpet?
It will get carpet. Not on the console tho
Obligated comment.
I have about 12-14 left to watch.
👍
Looking good.