How to Replace Rear Brakes 2013-2016 Dodge Dart

Поділитися
Вставка
  • Опубліковано 21 сер 2024
  • Buy Now!
    New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABF...
    This video shows you how to install new rear brake pads and rotors from TRQ on your 2013-2016 Dodge Dart. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
    This repair was done on a 2014 Dodge Dart GT 2.4L Sedan 4-Door FWD Manual and the process should be similar on the following vehicles:
    2013 Dodge Dart
    2014 Dodge Dart
    2015 Dodge Dart
    2016 Dodge Dart
    Tools you will need:
    • Flat Blade Screwdriver 1aau.to/obAQ/1A...
    • Pocket Screwdriver
    • 10mm Socket 1aau.to/obyk/1A...
    • 14mm Socket 1aau.to/obUZ/1A...
    • 19mm Socket 1aau.to/oaxX/1A...
    • 8mm Hex Socket
    • Brake Caliper Compressor Tool. Single Piston. Screw Style.
    • Brake Caliper Hanger 1aau.to/omg/1AX...
    • Torque Wrench 1aau.to/oa2J/1A...
    • Brake Grease
    • Brake Parts Cleaner
    • Cloth Rags 1aau.to/oKm/1AX...
    • Copper Anti-Seize
    • Gloves 1aau.to/oaLZ/1A...
    • Safety Glasses
    • 5mm Hex Socket
    • Floor Jack 1aau.to/oapT/1A...
    • Jack Stands 1aau.to/oaca/1A...
    • Wheel Chocks
    • Wire Brush 1aau.to/owB/1AX...
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

КОМЕНТАРІ • 7

  • @TRQ
    @TRQ  6 місяців тому +1

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @Meta4Monky
    @Meta4Monky 2 місяці тому

    so good. thanks for such a clear concise video.

  • @dayzguy4204
    @dayzguy4204 5 місяців тому

    thank you very much i had no idea why i couldnt get it to compress here is hoping i didnt screw up the threads lol my fist time working on a dodge im a honda guy lmfao

  • @drchillish
    @drchillish 3 місяці тому

    not sure whos bright idea using the 8mm hex bolts was but had to replace them with appropriate length normal bolts after only being able to mangle them off with a small pipe wrench, thanks fiat

  • @brandonray191
    @brandonray191 4 місяці тому

    What adapter size is that? I just purchased a kit off Amazon and I just wanted to make sure I have the correct one for when I do the rear brakes on my 2015 dodge dart

  • @ultimatums1
    @ultimatums1 2 місяці тому

    what did you do with the oil that you bleed out? did you add it back into the reservoir? you didn't show that part.

  • @brycmtthw
    @brycmtthw 5 місяців тому

    How do you adjust the parking brake cable?? Because mine just flops and doesn’t engage anymore…