OH Man of course this video pops up as soon as i open UA-cam, its like they know im looking for my knife??? Ive been looking for my Mini Pentagon for 5 days now! i cant believe i cant find it, i love that knife so much, and now im wondering if some one stole it out of my truck, and when i just checked your website, i cant even find the Mini Pentagon to buy again, i bought it around 2010 - 2011 and it was by far my favorite knife ive ever owned, and man o man i cant stop thinking about it and im so bummed! im about to turn our place and vehicles upside down looking for it!
I appreciate the quality of this video instruction. I like this knife. Im more accustomed to higher end handmade blades but this is a great production knife. I’d say great value.
Bought the covert - big regret. Sheath has zero retention. You don't even have to tip it upside down for the knife to fall out. Even worse, there is no way to increase the retention on the smaller one. Good going SOG. Glad to see you're up to your usual ways.
why do you need the spacer once you turned the pocket clip for horizontal carry? its only fastened by the 1 center screw this way? wouldnt it be better to remove the spacer and then all 3 screws can secure the clip for horizontal carry? also this covert is so hard to sheath and draw that when i tried to pull it out it jst came around from the back to the side :/ im assuming itll wear in..
I’m in the same boat. Knife laws in my state are extremely vague and really left to interpretation/ the cop’s mood. Easier for my to conceal a G19 than a double edged dagger. I wonder if pocket carrying the covert version would be considered “CC” smh.
I currently wear the kore essentials 1.5 gun belt and I bought the fx covert to edc but the clip is way to big for the belt or is there a smaller piece I can mount on the belt?
Seems like it would be be easier to just use long screws that pass through the tang and keep the scales together. These things are a little expensive, so I doubt it would be too expensive. Probably a bit cheaper.
I'm glad SIG is taking care of sheath design, all major brand sheaths in general are disappointing to say the least, with few exceptions. The only caveats are the two sliders to loose the knife fixation, and the the handle retaining system. Both unnecessarily complex. Please examine the Böker Applegate-Fairbairn dagger whole system, simple yet sturdy.
This is a good video, but I wish there was more information/video with these knives in use..at least other than the goober throwing his $200 daggers 🤦♂️. For all you newbs out there, NO serious operators ever throw their knives…..that’s movie/mall ninja🥷 💩. It appears that SOG is trying to get away from their mall ninja past and be taken seriously. It seems like the Pentagon FX’s are real, last ditch knives for people in dangerous places. I just wish there were videos of them in use/abuse to see what they can do. I want to see how difficult to sharpen as it is a double edge knife. I really wish they had gone CPM CruWear for the blade steel instead of S35VN, much tougher and easier to sharpen, but SOG NEVER uses a non-stainless steel, even tho CruWear doesn’t rust easily. If not CruWear, and it needs to be stainless, it needs to be Magnacut. These days, those are THE 2 steels for hard use AND performance.
Dude your prices are terrible! Sog is not there yet man! Love the knife but the covert, no way for that high a price! Good luck you will not get loyal customers charging these prices! Don't even get me started on the otf, lmao it's more expensive than a badass microtech ultratec! Like wtf?
Knocked it out of the park with these. Getting the FX.
Ty for that beautiful sheath. So menu makers over look that and it's my soul reason for scrolling for hours over a new knife.
OH Man of course this video pops up as soon as i open UA-cam, its like they know im looking for my knife??? Ive been looking for my Mini Pentagon for 5 days now! i cant believe i cant find it, i love that knife so much, and now im wondering if some one stole it out of my truck, and when i just checked your website, i cant even find the Mini Pentagon to buy again, i bought it around 2010 - 2011 and it was by far my favorite knife ive ever owned, and man o man i cant stop thinking about it and im so bummed! im about to turn our place and vehicles upside down looking for it!
That knife retention system is insanely nice. Very good idea
I can't find anything better than this for edc scout carry. That actually has a guard. Awesome
I appreciate the quality of this video instruction. I like this knife. Im more accustomed to higher end handmade blades but this is a great production knife. I’d say great value.
That Ares watch is beautiful
Those are 2 cool tools! 👍
Got a pentagot blackout fx a while ago, came out of the box with a hellova dull age...
Great video! Thanks 🙏
Bought the covert - big regret. Sheath has zero retention. You don't even have to tip it upside down for the knife to fall out. Even worse, there is no way to increase the retention on the smaller one. Good going SOG. Glad to see you're up to your usual ways.
😂
i see that the knife is mounted to the plate carrier upright. is the retention high enough to mount it opposite? upside down?
why do you need the spacer once you turned the pocket clip for horizontal carry? its only fastened by the 1 center screw this way? wouldnt it be better to remove the spacer and then all 3 screws can secure the clip for horizontal carry? also this covert is so hard to sheath and draw that when i tried to pull it out it jst came around from the back to the side :/ im assuming itll wear in..
Would love to see a single edged version of this knife. It is illegal to carry this in my state.
I’m in the same boat. Knife laws in my state are extremely vague and really left to interpretation/ the cop’s mood. Easier for my to conceal a G19 than a double edged dagger.
I wonder if pocket carrying the covert version would be considered “CC” smh.
Come on down to TEXAS brother….we’re all good here!
@Robert smart. Good luck with that. You may regret saying that when Tyrell and Leroy are busting out those cheeks.
Think you should move
Will that metal UMS clip be sold separately??
Interesting ideas overall.
Nice video 😀 keep it on.
Is it possible to mount a ulticlip on the covert?
Do you know?
I currently wear the kore essentials 1.5 gun belt and I bought the fx covert to edc but the clip is way to big for the belt or is there a smaller piece I can mount on the belt?
I have been looking for a knife this size for a while now. I think I have found it. Those scales look tidy. Could the scales come lose?
Would the covert work as a neck knife 🔪
Want to snag the full sized version of this for my plate carrier setup. Fine looking blades.
same
@@urielmartinez2161 smart man. We got the same last name lol
@@dylanmartinez2157 lol yeah
Where do I get a Secondary retention strap?
Could you use soft loops on the covert sheath?
ok... but when will the ums clip be available to purchase as an accessory?
How will he prove himself if used as a diving knife? Will it rust?
Sog seal FX tanto ?????
Nice. :-) Peace, Stiletto :-)
Red white and blue 🤟
Like the watch u r wearing... Got the link sir?
Seems like it would be be easier to just use long screws that pass through the tang and keep the scales together. These things are a little expensive, so I doubt it would be too expensive. Probably a bit cheaper.
messed my knife tip up and now i csnt get the tip sharp, idk the angel to sharpen it either 😳
I'm glad SIG is taking care of sheath design, all major brand sheaths in general are disappointing to say the least, with few exceptions. The only caveats are the two sliders to loose the knife fixation, and the the handle retaining system. Both unnecessarily complex. Please examine the Böker Applegate-Fairbairn dagger whole system, simple yet sturdy.
👍🏻
Only a Special case would take the handles off
Bring back the desert dagger
This is a good video, but I wish there was more information/video with these knives in use..at least other than the goober throwing his $200 daggers 🤦♂️. For all you newbs out there, NO serious operators ever throw their knives…..that’s movie/mall ninja🥷 💩. It appears that SOG is trying to get away from their mall ninja past and be taken seriously. It seems like the Pentagon FX’s are real, last ditch knives for people in dangerous places. I just wish there were videos of them in use/abuse to see what they can do. I want to see how difficult to sharpen as it is a double edge knife. I really wish they had gone CPM CruWear for the blade steel instead of S35VN, much tougher and easier to sharpen, but SOG NEVER uses a non-stainless steel, even tho CruWear doesn’t rust easily. If not CruWear, and it needs to be stainless, it needs to be Magnacut. These days, those are THE 2 steels for hard use AND performance.
Bring back the Agency
S.O.G.? Dude you guys can't change your name now
Shut up and take my money.
Dude your prices are terrible! Sog is not there yet man! Love the knife but the covert, no way for that high a price! Good luck you will not get loyal customers charging these prices! Don't even get me started on the otf, lmao it's more expensive than a badass microtech ultratec! Like wtf?
SOG KIKU XR AND XR LTE CERAMIC BEARING KITS NOW AVAILABLE ON EBAY. JUST SEARCH FOR "SOG KIKU KIT"
Similar to Böker Steel Mariner and Eickhorn
What for????