Echo chainsaw carb fix for cheap. Installing new carb kit
Вставка
- Опубліковано 30 вер 2024
- Links to products I have in my tool bag.
Compression tester. amzn.to/2NMgeze
Spark Checker. amzn.to/3bnXjmA
Tygon Fuel Line. amzn.to/3aCGntm
Carburetor Adjustment tools. amzn.to/3k7cgxe
Primer Bulb. amzn.to/3dC0WYK
Fuel Filter. amzn.to/2ZC0T7i
Here is a link to the previous video diagnosing the no start issue for this echo chainsaw.
• Why won't this Echo ch...
After diagnosing that we had spark and some compression it turned out to be the carburetor of course. In this situation we order a new carb kit from ebay or only $5 shipped in the US. The install is pretty simple other than getting to it like most chainsaws. Thanks for watching and if you would please check out my other videos.
Straight forward video and to the point without needless talking. Very good.
Thank you Happy Camper for the comment I appreciate it.
Yeah. Very good video
surprised you didn't clean main and idle jets, etc....
notice the gaskets are reversed for the 2 diaphragms! Be careful
Hi. I am write from Puerto Rico. I have seen many videos here. But this is one of the must helful. This Echo CS400 is similar to CS370. I have to say that Echo chainsaw is not that I expected. I consider a bad product. The oil bar chain pump is a mess. Also now the carburator. I personally like to mantaining my tools and equipments clean and running but Echo 1. Required to much mantainace. 2. Troubleshooting to start a lot. 3. The guaranty is relative good but the dealers are to slow in the repairs and also looking always to sale parts that are not included in the guaranty. Versus the trimmes which the experience is totally diferent. Thanks for this video. Amaizing.
Thank you LuisFMarrero for the comment. Do have a chainsaw that you recommend over echo?
No unfortunaly. But I usually check videos from other trades. But in my case I bought the Echo previuos the 2 huracanes that hit the island of Puerto Rico. There were trees all over the place and the natural devastation were heavy. So I start using the Echo 14'' and had problems. I change it for a 16'' and had problems with the bar oil pump. And then I but the 18'' and had problems with the bar oil pump as well. I keep the 18'' after the waranty change of the pump. I dont used too much, but know didn't starts. But after your tutorial I cleaned up an start. But any how needs a carburator kit. So I am planing to buy another trade. Thanks againg.
@@LFCOM59 thank you for the information I appreciate it.
Great video but never use carburetor cleaner or starting fluid to start a 2cycle engine it is better to use wd 40 or 2 cycle mix directly in the carb to avoid further damage to the cylinder
Thank you Leo Ramirez for the comment. Yes I'll try to avoid using that.
If you do don't use but a lil spray and when it fires kill it
That stuff gets hot fast
Why there is no gas spilling when you disconnect the fuel lines? Do you need to fully empty the gas tank before proceeding? Very nice tutorial, thank you.
I like to drain the fuel before working. That way it's a lot less messy
Note that if you are doing this on the kitchen table, there is a small amount of gas in the carb, just have a rag to catch it. I was disappointed that the alignment holes on the metering diaphragm gasket and the metering diaphragm on the OEM kit did not line up and I had to take surgical scissors and cut the tiny holes to fit. Thank you for posting this vid. I wouldn't have tried it on my own, just looking at diagrams in the schematic - too green, too much of a wuss.
thank you for the comment I appreciate it.
Best carb video for small engines I have seen. Step by step
Thank you Sally Pires for the comment I appreciate it
Great video. I’ve been meaning to ask where you’re getting the carb kits from?
OEM ones are almost as expensive as a Chineseum replacement.
I buy them on Amazon. Yes they can be expensive
Do u have a vid on adjusting throttle and h/l screws after a new install?
not on this saw.
I have that exact saw thanks for the information it's is a verry strong saw
Thank you Mike Bennet for the comment. I appreciate it.
Thanks for posting this video. Now Ill tackle my Husqvarna chain saw.
Thank you for watching and commenting I appreciate it.
great info, thanks for posting, never done one, but seems pretty straightforward, I need to memorize the order of those gaskets/diaphrams ;)
Thank you for watching. It's really not hard and can be very fulfilling when you get done.
Nice helpful video. Well explained and well shot. Thanks.
Thank you Issac Keith for the comment I appreciate it
What if someone put a chain oil into the gas tank and the chainsaw no longer starts... Does it mean the carburetor would need to be replaced? Thanks.
Not at all. Pour out the chain oil from the tank as much as you can. Then put some mixed fuel in the tank. Press the primer bulb until you see fuel fill up the bulb and you should be good to try and start it.
@@HomeGaragechannel Thank you, I will definitely try it.
I don’t know much about Echo chainsaws, but I bet they’re just as a good as a Husqvarna or Stihl. However I have my Craftsman saw that I got for 150 dollars with a 14 inch blade, and it seems to be the perfect saw for me.
I think the build quality is good, it just depends on how you use them. I would buy one no problem.
Lucky me, I let my CS-370 sit in the garage for over a year and it started right up and ran like I used it in the last 7 days. Speaks to Echo quality engineering.
I need a couple larger saws, so I'm going to get those from ECHO, also.
sounds like a plan.
I’ve got a cs-400. Got any tips on taking off those limiter caps?
Unfortunately no, do you think you an seen me a pic at my mail? homegaragemail@gmail.com
As others said, straight , to the point and detailed. I've had trouble starting this saw off and on for over a year. Bought a carb online for less than $20 and in less than 45 minutes, with the help of this video, had my saw running again. Thank you
no problem and thank you for your time.
Instructions were very helpful and accurate thank you very much
Glad it was helpful!
show how to adjust the idle
I don't have this saw anymore
Nice job. Short sweet and to the point with killer camera work. 👏👏👏👏
ulitepilot aka Zombie Dave thank you for the compliment.
How do u adjust carb i put a new one on my cs400. But wont start any pointers.
can you tell me a few things first. Have you heard this saw run before? Or is this a new saw to you? Second, have you tried to put some fuel into the carb's throat and start it yet?
@@HomeGaragechannel it does work ive had since 2008. It was working then they messed with adjustment now it wont start wil strting fluid work
I see now, I'd find out what the Default setting are supposed to be if you can find them and reset it then.
cool
Thanks for watching and commenting.
cool video
Thank you Duje Amizic
Now, we'll see
Great job!
Alan Marshall thank you I appreciated it.
Perfect demo video on the carb kit... Couldn't ask for a better one.
Glad you liked it! Thank you Joe Young.
Just what I was looking for. Thanks
Glad I could help
Very good info. Thanks !
thank you!
Great lil saw I ported mine it came to life
very nice!
Great video. How would you suggest some one learn about small engines that is interested in working on them.
Carl McMillen thank you for the question. If you're more hands on then do research first to familiarize yourself via the internet and UA-cam. Then find a piece of equipment you don't mind breaking and start exploring how it works. This is basically how I started but with cars.
Buy busted chainsaws, lawnmowers, etc. and tear them down using the manuals and UA-cam videos and repair them.....the book and videos will get you most the way there on it, a little common sense, an/or natural ability should finish it off with most repairs. Most companies have an 800 number to consult with. Sell repaired equipment to pay for busted equipment and parts to start over.... or you can go the other way and take classes....
Any lawnmower next week?
Sure thing a lawnboy 4cycle that leaks a lot of oil.
I’ll be waiting for that video!