How to Replace 2007-12 Nissan Sentra Engine Mount
Вставка
- Опубліковано 7 вер 2024
- Buy Now!
New Engine Mount from 1AAuto.com 1aau.to/ia/1AEM...
A shaking or vibrating engine, or bucking when changing gears are signs of worn engine mounts. This video shows you how to install a new engine mount on your 2007-2012 Nissan Sentra.
• Check here for more videos on the 2007-2012 Nissan Sentra • Nissan Sentra 2007-2012
This process should be similar on the following vehicles:
2007 Nissan Sentra
2008 Nissan Sentra
2009 Nissan Sentra
2010 Nissan Sentra
2011 Nissan Sentra
2012 Nissan Sentra
Tools you will need:
• 10mm Socket 1aau.to/oa/1AXA...
• 13mm Socket 1aau.to/oa/1AXA...
• 16mm Socket 1aau.to/oa/1AXA...
• Block of Wood
• Floor Jack 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Nissan Sentra 2007-2012: • Nissan Sentra 2007-2012
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
@TRQ What's the labor for motor mount and transmission mount? How many motor mounts and transmission mounts?
I did it myself!! The ride quality of my car is amazing! I watched a couple of different videos on this topic. I was initially nervous to lift the engine beneath the oil pan, but I kept some soft linen and a small about 3x4" wooden block (Pressure treated) on top of the floor jack point. I am slowly bringing my 07 Sentra to life and to the ride quality I need to drive 60 miles a day. Thank you for your video.
torque setting would be helpful. thanks for the video.
So, we go from replacing a motor mount to changing the oil after replacing the VVT solenoid.
Excellent video!
I ordered my motor mount, and instead of paying a mechanic, I will do it myself.
The right passenger side is the easy one.
The bottom transmission torque mount was easy, but I had to use a large pipe as a cheater bar on the large 18mm nuts.
I was experiencing vibration in the car, and it should be corrected once the top motor mount is installed.
I'm hoping I won't need the driver side changed, as that won't be as easy as the passenger side.
Thank you for the great video!
Thank you. I have the same thoughts. I will buy these two mounts and replace them myself. the third one, the transmission mount seems to be the hard one. I probably will not change that myself. if the vibration and shaking is gone, I would not bother paying for a mechanic to do it for me. reading comments and watching videos like this give me confidence to do it on my 07 Sentra.
@@RMalai did you end up changing the top passenger mount? I just got my bottom and top mount
Great video! You made it look very easy and I can wait to fix my car. Thank you.
I replace all mounts easiy only thing I took off is battery and tray for trans mount
Would the 2.0 manual transmission Sentra be the same or does it have different mounts ?
Need torque specs on those engine mount bolts.
How do you know if the mount is good or bad Nissan latio
Great Video!! Is the process pretty similar on a 2016 Sentra?
So there are mounts on both sides but you may only need to replace one mount, correct?
does this video applies for a Nissan Sentra SE R Spec V 2007?
Is that for the passenger
Is this the same process on a 2017 Sentra
How much should this cost? I have 2014 Nissan Sentra.
I don't see a resevoir under the hood of my car like in this video. I have a 2014 Sentra. Would it look different or be in a different location for a 2014?
+Sheirah Wilson This procedure is for the 2007-12 Nissan Sentra and might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ
I wasn’t able to get the engine re aligned properly. This job isn’t as easy at it seems.
Like
Lol using a air gun on 10mm bolts is crazy