This is a very impressive system. Im just surprised you dont have a fire extinguisher handy. Lol. I love the brand myself. I like how well you explained about running those new little amps on multiple 4 ohm mids and tweets. Because if more people knew , they could series-parellel ,sets of 4 ohms to a mono block amp, they would. Turnning a 2 channel amp into a 4 channel with no problem into 4ohm - 2 sets ,one mono block . Works just fine . Have a great day sir.
I got to hear your old setup at river slam (I think?) last year. The new build looks great! I just bought an astro van to put my subs out of my truck in, i want my truck bed back. ha ha
Yeah that was me. I went to jam at the dam this year and will probably go to river slam later this year. Good luck with the van I’m sure I’ll see it at one of these shows 👍🏽
Nice. I use the older model DB Sylvesters (2 pairs) and one pair of the older model Arnold. But I power each Sylvester with about 230w rms, and each Arnold gets about 125w rms or so. The Arnolds reflect off the rear windscreen, so to my ears they seem just as loud as the fronts, so that works. I also have a pair of those MFT-25 that I only recently bought, but after testing them Im ordering 2 more pairs.
Yeah I’m not running much power to the mids because they’re so loud haha I got them to where I can stand listening to it. The mids and highs is where people go deaf and I’m not trying to
Sweet build and beautiful install! I like that you kept everything matching. I've been looking at the 3012 and the 3512 for my next setup, are you happy with them?? Subbed
Clean setup man lots of work and time into it for sure my build is kinda done for now just need to add some fans for my 3 5ks running 9 Sundown e hybrids 1k rms each on 3 slapz 5ks doing a 157.5 so far but new subs so taking it easy in em for now
@@808PatAnderson yeah I can definitely turn my amps up more but I'm giving them plenty of good clean power for now might swap to 3 8ks later are you going to be at MOS
Love this build bro I'm supposed to have my AAK 6k tomorrow super stoked got to wait for the SCIB to get here should be next week now I need new subs thinking about getting the 3015's or maybe the 3515's
@@808PatAnderson I'm going to build inside the trunk for a blow through and it's going in a 19 Camry I would build in the backseat area but I have never seen an enclosure like that in real life so I don't know how to build one
Yeah I unfortunately haven't sold my Lincoln yet to buy just a build vehicle so I'm building in my daily driver lol as long as I can still get to work I'm fine
That’s what I was wanting to do bc I got jp23 v1.5 atm and the subwoofer bass knob v.2 from d4s wanted to run both just leave the factory one turned up and not mess with it. I like the fact of having the clip light but I have the bass knob lol. But thanks man this is what i needed to know
Question I've never ran an amp with multiple power and ground input should I run all six to the SCIB or the power to the SCIB and the ground to the frame or split the ground between the battery and frame
@@808PatAnderson hey will the higher voltage damage anything other than the lights over time I read that on a couple forums reason I'm asking is I hooked up the SCIB today and just to the car and charged it, hooked it up and started the car the car started fine and the voltage was good but I did get a charging system malfunction indicator on the dash message and the radio I didn't go any further until I know for sure I know cars are different some like mine have electronic everything from the fuel pump, water pump, power steering etc I know it only said that because the voltage went over 15 and I was told I would possibly see it when initially installing the HO alternator so I'm not really concerned about the message itself it's basically just the newer version of a battery light
since you have so much money in this system please do yourself a huuge favor and get rid of the priv dsp and switch it out for a helix dsp the difference will be miles!!
You did a hell of a job on the install! Looks really solid and lots of time spent... You should be super happy with the job you did
@@Simpleman1078 thank you 🙏
I love the build. You've come a long way since last year.
Thanks it’s only getting bigger from here
Sounds so clean cos you don’t hear the bass till the camera is inside the truck and it’s banging
Really impressive build! I got a chance to listen to it at the Anniston Al Bass Wars a few months ago. Very loud and nice build, good job!
Thank you!
This is a very impressive system. Im just surprised you dont have a fire extinguisher handy. Lol. I love the brand myself. I like how well you explained about running those new little amps on multiple 4 ohm mids and tweets. Because if more people knew , they could series-parellel ,sets of 4 ohms to a mono block amp, they would. Turnning a 2 channel amp into a 4 channel with no problem into 4ohm - 2 sets ,one mono block . Works just fine . Have a great day sir.
Thanks. Those little tweeters are great and don’t take much power at all. Thanks for the support.
Very cool design, build, execution, system, humbleness
Looks clean & professional
Thanks for sharing
Gonna go watch all previous videos
Thank you very much. This is what I love 🤙🏽
I got to hear your old setup at river slam (I think?) last year. The new build looks great! I just bought an astro van to put my subs out of my truck in, i want my truck bed back. ha ha
Yeah that was me. I went to jam at the dam this year and will probably go to river slam later this year. Good luck with the van I’m sure I’ll see it at one of these shows 👍🏽
I liked this build
Thanks! New build coming soon
Beautiful build!
Thanks 🎉
Nice. I use the older model DB Sylvesters (2 pairs) and one pair of the older model Arnold. But I power each Sylvester with about 230w rms, and each Arnold gets about 125w rms or so. The Arnolds reflect off the rear windscreen, so to my ears they seem just as loud as the fronts, so that works. I also have a pair of those MFT-25 that I only recently bought, but after testing them Im ordering 2 more pairs.
Yeah I’m not running much power to the mids because they’re so loud haha I got them to where I can stand listening to it. The mids and highs is where people go deaf and I’m not trying to
Looks good basshead brother! I have an 05 expedition with a similar build of SPQL. Thanks for sharing.
Thanks man. I need to learn more about sql. Pease subscribe. I appreciate it
A pillars look awesome. Sweet walk around and the 6x9's thanks on the info.
Thanks man!
Sweet build and beautiful install! I like that you kept everything matching. I've been looking at the 3012 and the 3512 for my next setup, are you happy with them?? Subbed
Yes I’m extremely pleased with the subs. The 3512 are a great option too but you’d need a lot of power behind them
I looked up the cells on sriko and saw your review on there! Awesome build bro
I appreciate it 🤙🏽
Very clean build, you did a great job 👍🔊🔉🔈
I appreciate it man.
Nice walk around question. Do your battery light come on with both alternator running
Thanks. No my battery light isn’t on.
Clean setup man lots of work and time into it for sure my build is kinda done for now just need to add some fans for my 3 5ks running 9 Sundown e hybrids 1k rms each on 3 slapz 5ks doing a 157.5 so far but new subs so taking it easy in em for now
I appreciate it man. A good break in a always good in my opinion 👍🏽
@@808PatAnderson yeah I can definitely turn my amps up more but I'm giving them plenty of good clean power for now might swap to 3 8ks later are you going to be at MOS
@@Hellabassguy it’s a bit of a drive. I’ll be at the xs power show Knoxville in July
Nice built
Awesome build
Thanks 🙏
Nice I like it.
Thanks 🙏
Ryan you like anything with a hole and a heartbeat
Love this build bro I'm supposed to have my AAK 6k tomorrow super stoked got to wait for the SCIB to get here should be next week now I need new subs thinking about getting the 3015's or maybe the 3515's
If you can then why not lol 2 3515 the 6k at half ohm should be a good pair. What box and vehicle
@@808PatAnderson I'm going to build inside the trunk for a blow through and it's going in a 19 Camry I would build in the backseat area but I have never seen an enclosure like that in real life so I don't know how to build one
@@SlamryCamry19 that’ll be tight for 2 15s but good luck man
Yeah I unfortunately haven't sold my Lincoln yet to buy just a build vehicle so I'm building in my daily driver lol as long as I can still get to work I'm fine
what is the specs of this bass box
.88 cubes per 12 on the sealed side. 1:2 ratio tuned to 46. Plays 24-60
I see you have the factory bass knob connect still aswell as the rca bass knob beside your seat. Dose that not affect anything
They’ll both work at the same time with no negative effects. I use the factory knobs for voltage and temperature gauges only.
Be sure to subscribe!
That’s what I was wanting to do bc I got jp23 v1.5 atm and the subwoofer bass knob v.2 from d4s wanted to run both just leave the factory one turned up and not mess with it. I like the fact of having the clip light but I have the bass knob lol. But thanks man this is what i needed to know
@@joshualstacy69 happy to help 🤙🏽
What alternators do you use
@@torrescesar71 js alternator
Whats the total investment?
I’ve only counted once. I don’t pay full price though. For someone else over 10k
@@808PatAnderson dam...
How did you do you dual alternator bracket
www.southerncustomsla.com
Thanks for the walk through. How do you like it vs. before. You were running sa302's on AAB 7800.1 at 2ohm correct? Pretty close to the same power?
This is another animal lol still need another 8k. Coming soon
Nice
Thank you
Question I've never ran an amp with multiple power and ground input should I run all six to the SCIB or the power to the SCIB and the ground to the frame or split the ground between the battery and frame
All to battery. Run 2 1/0 grounds from
Battery to frame( or other good ground) and 2 1/0 power from alt to battery
@@808PatAnderson ok thanks again bro
@@808PatAnderson hey will the higher voltage damage anything other than the lights over time I read that on a couple forums reason I'm asking is I hooked up the SCIB today and just to the car and charged it, hooked it up and started the car the car started fine and the voltage was good but I did get a charging system malfunction indicator on the dash message and the radio I didn't go any further until I know for sure I know cars are different some like mine have electronic everything from the fuel pump, water pump, power steering etc I know it only said that because the voltage went over 15 and I was told I would possibly see it when initially installing the HO alternator so I'm not really concerned about the message itself it's basically just the newer version of a battery light
@@SlamryCamry19 I’m sure every vehicle is different. I’d just ask on Facebook groups to people with similar car
CONCRETE FLOOR IS INSANE!!! WAY TO TRAP UR SOUND!
It’s held so far. One day I’ll uncover it to inspect it and see how it’s holding up
What!? 8 tweeters are really loud?! Noooo, tell me more.
Haha well when you say it like that 🤷🏻
Damn the fans sound like a plane reving up for takeoff
Haha they work great
Welding wire
Dlo
since you have so much money in this system please do yourself a huuge favor and get rid of the priv dsp and switch it out for a helix dsp the difference will be miles!!
Yeah I really need to upgrade that unit
Please subscribe
It has been cold in California.
OK :)