45ah scib lto performance ( 43.5 ah )

Testing the 43.5 amp hour scib Lto lithium battery.
Js alternator 400 & 370
Bassknob & Led rings: gorillaknobz.com
Switch panel: a.co/d/eXMkbTx
Tweeters: alphardaudio.u...
6.5” speakers alphardaudio.u...
8” speakers alphardaudio.u...
Subwoofers: alphardaudio.u...
Tweeter amp: alphardaudio.u...
Midrange amp: alphardaudio.u...
Subwoofer amps aak.8000.1
alphardaudio.u...

[@Qrvaz]

Very nice! Getting ready to build my bank. Also, just in case you didn’t know. These cells aren’t at full capacity until 16.2 volts so you have a ways to go before you’re even seeing the max performance. Thanks for the video man.

[@62dobie]

Nothing better than stable voltage. Less chance of blowing your system.

[@dougloyd5988]

And that’s how it done!!

[@jwatt95]

I’ve been checking these out. Appreciate this video.

[@808patanderson]

I’ll eventually add a little more. Maybe like 15-30ah

[@jwatt95]

@@808patanderson I have a cosmos 13k currently on 2 sundown sddn 15s. Looking to switch up to 2 salt 6ks or audio dynamics 8ks gain matched at half with a dd zvl. I have 2 jy hp 40s currently and a mechman 400 amp alt. Sky high 2/0 ofc wire. Jp 23.4 on mids which will change over to tweeters and will add a jp 45.4 or dd 4.200 on mids depending on wiring options since the dd 4.200 is 1 ohm stable. Previously had 2 dd 9500 15s fully loaded wired to half on a dd m5a, then the ruthless 8500, and cosmos 13k after the ruthless.
Lowest I drop to right now is 13v at idle but I wanna charge at 15.3 next and upgrade my bank. Been looking at that 43.5 ah bank but been curious on how the reserve was on it.

[@808patanderson]

They hold pretty decent. They charge super fast so this helps them from dropping too far as long as you have solid alternator power.

[@joshmorris83]

​@808patanderson how long do you let the vehicle sit, I'm curious if the bank dies over time from sitting

[@PoppaTInstall]

Thanks for the video!

[@808patanderson]

Thanks for watching!

[@BlackCoffee-dk7tn]

Absolute insanity

[@SlamryCamry19]

💪💪💪 super strong I love my SCIB bank will be adding reserves to my 29AH bank very soon got big things in the works you don't know anyone with a AAK 6k for sale do you im going to need a second one for the build im doing

[@SoberBassHead]

Very impressive 😊

[@808patanderson]

Thanks for tuning in!

[@1904audio]

NICE WORK! IM FEELING IT not sure if the would be the correct route for me. Have you used yin long and if so how do they compare?

[@808patanderson]

Same chemistry just a different cell. Both lto but these have a higher c rating

[@LoudStereoTINYDICK]

Thank you for this video i want scib i just dont know how they will perform. I think i need at least the 87ah. Im planning on clamping 32,000watts to the subs so ill need probably 50,000w available to pull from the bank so i would think a minimum of the 87ah scib bank. I honestly wish i could get the 174ah bank

[@808patanderson]

Yeah they are pricy but can build it for cheaper. I built mine for 900

[@Stock_ishhh]

Is there an advantage in using the 2.9ah cells over the 10ah? I’m limited on space and would save a little going with less 10ah cells.

[@808patanderson]

I don’t know everything but I’ve heard the smaller the ah usually the higher charge and discharge rates. This battery isn’t very large and they have smaller configurations available

[@808patanderson]

The big battery guys in the game say these are the next best thing so I’m just putting it to the test haha

[@Stock_ishhh]

They look like they are working great in your setup. I’ve been looking into them lately and came across your videos of the bank build. Just what I needed, I think imma go this route. Thanks.

[@808patanderson]

@@Stock_ishhh that’s awesome. Glad it could help

[@JohnDoe-fk5fr]

Check discharge rate. There’s a scale that’s used to tell you. Diy lithium guy made a video where he makes a 24volt into a 12volt and that battery had a discharge of 15kw and would discharge in something like 4 minutes. It’s $340 I looked into it but had already bought an lto 6.0 from d4s.

[@Lt_Krunkie]

what g wire are you running? im putting a 4k amp in my car and im not sure which guage to put in, you think 6 or 4 is fine?

[@808patanderson]

I run 4/0 and 1/0. You should run 1/0. Or whatever size inputs are on your amp

[@Lt_Krunkie]

Im running the pyle PLA2678 looks like itll fit 1/0g on power but 4 or even 6 would be fine i think for wiring the speakers

[@808patanderson]

@@Lt_Krunkie that amp will max out around 1000w so 4ga should be good. 👍🏽 if you need something that will deliver 3000-4000 watt I’d suggest the deaf bonce atom 3.5k

[@Lt_Krunkie]

@@808patanderson im getting the DB-SA252 D1

[@808patanderson]

@@Lt_Krunkie grab the D2 version so you can wire it to 1ohm and the deaf bonce atom 1300 or 2000 would be perfect 👍🏽

[@michaelcook2271]

What headunit you running

[@808patanderson]

Alpine cde172bt