İyi günler video ile ilgili bir sorum olacak .. kondansatörü köprü diyotun ac terminallerinemi başladınız yoksa pozitif ve negatif kutuplarinamı Teşekkür ederim Türkiye den selamlar.
Otra cosa amigo, en vez de un puente rectificador como el que usas, ¿podría construir uno con 4 diodos rectificadores de 10 amperes c/u? porque si no me equivoco el KBPC 3510 es de 35 amperes.
Good day, I have a question about the video. Did you start the capacitor on the AC terminals of the bridge diode or on the positive and negative poles? Thank you, greetings from Türkiye.
Impecable tu trabajo, quedó como hecho de fabrica. Pero yo no pude ver bien donde conectaste los cables amarillos en el puente rectificador. Tengo dudas se van en las salidas positiva y negativa DC o entre la positiva dc y una de las alternas. ¿Me lo podrias aclarar? y condensador creo si vá entre las dos patas positivas y negativas de puente rectificador. Gracias Nota: alli donde van los diodos con con catodos comun llega corriente alterna? Disculpa son un aficionado a la electronica.
Disculpe amigo será que me puedes ayudar con lo siguiente: estoy haciendo un cargador de batería para autos y no tengo ni transformador ni puente rectificador. Tengo un capacitor ac de 45 micro faradios/ 250 voltios y cuatros diodos rectificadores de 10 amperes. En mi País el voltaje es de 120 voltios. Quiero conectar a través de un enchufe interrumpiendo una de las fases con el capacitor a los diodos (convertidos en un puente rectificador) y sacar la DC ( unos 14 o 16 vdc) para cargar la batería. Eso es factible.
@@geobanygarcia2355 hello , Trying to make a car battery charger will be a waste of time... because you need a high current and this cannot be obtained with just a few components. I advise you to buy a charger
Thanks for sharing
So good. Thanks Inventor AW
İyi günler video ile ilgili bir sorum olacak .. kondansatörü köprü diyotun ac terminallerinemi başladınız yoksa pozitif ve negatif kutuplarinamı
Teşekkür ederim Türkiye den selamlar.
Good
Otra cosa amigo, en vez de un puente rectificador como el que usas, ¿podría construir uno con 4 diodos rectificadores de 10 amperes c/u? porque si no me equivoco el KBPC 3510 es de 35 amperes.
Sí, puedes usar 4 diodos.
@@Inventor_AW muchas gracias amigo, en especial por lo rápido de tu respuesta. Ojalá todos los que suben videos actuarán así. Gracias.
Good day, I have a question about the video. Did you start the capacitor on the AC terminals of the bridge diode or on the positive and negative poles?
Thank you, greetings from Türkiye.
on positive and negative
@@Inventor_AW thank you
Impecable tu trabajo, quedó como hecho de fabrica. Pero yo no pude ver bien donde conectaste los cables amarillos en el puente rectificador. Tengo dudas se van en las salidas positiva y negativa DC o entre la positiva dc y una de las alternas. ¿Me lo podrias aclarar? y condensador creo si vá entre las dos patas positivas y negativas de puente rectificador. Gracias Nota: alli donde van los diodos con con catodos comun llega corriente alterna? Disculpa son un aficionado a la electronica.
Los cables amarillos se conectan a las salidas de CA.
ua-cam.com/video/QFkPlV3j9vY/v-deo.html
Disculpe amigo será que me puedes ayudar con lo siguiente: estoy haciendo un cargador de batería para autos y no tengo ni transformador ni puente rectificador. Tengo un capacitor ac de 45 micro faradios/ 250 voltios y cuatros diodos rectificadores de 10 amperes. En mi País el voltaje es de 120 voltios. Quiero conectar a través de un enchufe interrumpiendo una de las fases con el capacitor a los diodos (convertidos en un puente rectificador) y sacar la DC ( unos 14 o 16 vdc) para cargar la batería. Eso es factible.
@@geobanygarcia2355 hello , Trying to make a car battery charger will be a waste of time... because you need a high current and this cannot be obtained with just a few components. I advise you to buy a charger
❤ok
Спасибо, понравилось, есть блочёк, хочу попробовать.
Удачи
Tank s
😊
Нет регулировки тока, а так пойдёт
Существуют модули, контролирующие напряжение и ток, которые вы можете использовать.
Con ese tipo de fuentes atx Ise una fuente de laboratorio regulable 😅los +12 y los -12 volt solo arroja unos 3 a 4 amperes aprox
I did not use -12 volts because it is low amperage
@@Inventor_AW😅 gracias por decirme eso profesor ya lo descubrí con pruebas y errores al agregar una carga fantástico Dumi load 👻
@@Inventor_AW то есть с этой переделкой он выдаст 25-30 вольт и 12 ампер?
@@namen.2307 Только 9А при использовании провода диаметром 1,5 мм.
@@Inventor_AW ну нормально. спасибо. вы хорошо говорите по русский. спасибо.