Kemper Profiler Tutorials - Rig Manager iOS (english)

Поділитися
Вставка
  • Опубліковано 14 січ 2025

КОМЕНТАРІ • 73

  • @andreasbarthel6409
    @andreasbarthel6409 3 роки тому +7

    Dear Kemper Team, Thank you so much. In all the years you make a great Product Even better and better. Thx, stay save, rock on and i love my Kemper Head

  • @ledendpf
    @ledendpf 3 роки тому +9

    Only ios? :( no android?

  • @thrashzone13
    @thrashzone13 3 роки тому +18

    Will there be a android rig manager?

    • @garettoverstreet
      @garettoverstreet 3 роки тому +1

      Yes, why alienate a huge percentage of the market???

  • @marcdusseault9426
    @marcdusseault9426 3 роки тому +4

    Thanks Kemper team for a killer application !

  • @franfranvy6028
    @franfranvy6028 3 роки тому +2

    That’s awesome !!!! Thanks kemper

  • @joebadgerguitar
    @joebadgerguitar 2 роки тому +4

    A Kemper internet dongle would be great or even if the new models came with in built Wi-Fi?

  • @collegeofcool8109
    @collegeofcool8109 3 роки тому +8

    A little half -baked. Have to agree with Paul. My router is nowhere near my Kemper Toaster, so this is useless for me. A direct cable connection from the ipad to the Toaster would at least give us a "remote control" to the Toaster. Hopefully a WIFI hardware upgrade for the toaster will be made available, and we can ditch the cable.

  • @diegooliveras1952
    @diegooliveras1952 3 роки тому +9

    So if you have a toaster with remote you can’t use it…it’s weird you didn’t cover that

    • @TinoSchulz1990
      @TinoSchulz1990 2 роки тому

      It's weird you didn't even watch the video. They did cover that at the very beginning. All you need is a router and an ethernetcable.

    • @diegooliveras1952
      @diegooliveras1952 2 роки тому +1

      It’s weirdest that you didn’t understood my question…With a REMOTE…remote….router and remote…do you know what a remote is? That was my question…it is not covered how to set the Ipad and , again, THE REMOTE…so you lost a great opportunity to keep your mouth shut …

    • @TinoSchulz1990
      @TinoSchulz1990 2 роки тому

      @@diegooliveras1952 Why would you want to connect a remote AND the iPad at the same time? Just disconnect the remote, connect the router + iPad, configure your settings, disconnect the router and reconnect your remote.

  • @SebPerfake
    @SebPerfake 3 роки тому +2

    what about android or web client, to access from any brower ?

  • @formercakid
    @formercakid 3 роки тому +1

    Thanks - Awesome Achievement!

  • @drunkenguys1818
    @drunkenguys1818 3 роки тому

    라이브할때 톤 조정하려면 복잡했는데... 아이패드 연동되니 너무 좋네요 켐퍼 짱!!!!

  • @scottrock19
    @scottrock19 3 роки тому +5

    Why not by USB so I can utilise it whist on stage/ at rehearsals?

    • @SilverSurferC6
      @SilverSurferC6 3 роки тому

      Depending on where you place the head, that could require one heck of a long USB cable. Probably not recommended.

  • @paulbutton8933
    @paulbutton8933 3 роки тому +8

    This really needs a way to connect direct, without a router.

    • @danielpirone8028
      @danielpirone8028 3 роки тому

      There is - use the kemper as the WiFi hub. It is in the video. Right?

    • @henrikveeaar
      @henrikveeaar 3 роки тому +2

      @@danielpirone8028 Looks like it's just for Profiler Stage, I don't think the original Profiler has a wifi module built in.

    • @rebluecrow
      @rebluecrow 3 роки тому

      @@danielpirone8028 It seems that stage is the only one with wifi capability. One way to connect head/rack directly is via a RJ45 dongle in the iPad and a crossed cat5 to the RJ45 connector in the profiler. Anyway, that solution would be a no wifi one and, in my opinion, meaningless.

    • @JonathanKlein
      @JonathanKlein 3 роки тому +1

      It would be nice if you could connect a USB wifi dongle to the toaster to get it on your WLAN but they would have to create a driver for the dongle to work. Hopefully they offer that on the future.

    • @Utube-s8m
      @Utube-s8m 3 роки тому +1

      @@JonathanKlein so they only offer it to the least expensive item they make? Great.

  • @danc3746
    @danc3746 3 роки тому +3

    ummm...how about Andriod???

  • @scottmaple6775
    @scottmaple6775 3 роки тому +2

    This is excellent, works perfectly on my Profiler Stage.
    With access point mode - could there be a wireless guitar transmitter coming?

  • @kennethmeeker6369
    @kennethmeeker6369 2 роки тому

    Way easier now with the stage, I hated rig manager and to much back n forth on the unit especially after several pints of beer
    Drunk n jamming danke !

  • @BobSince1981
    @BobSince1981 3 роки тому +4

    Cool but what about iPhone instead of only iPad?

    • @Utube-s8m
      @Utube-s8m 3 роки тому

      They have a short time to get it together with an iPhone or I’m out. Constant spending when some of us are all struggling with many things. Physical and financial. You have competition now.

  • @orbithesun1
    @orbithesun1 3 роки тому +1

    It would be great if Rig Manger iOS had control over the Looper inside the KPA. Maybe even editing of loops through the App, if possible?

  • @TheCrystalyne
    @TheCrystalyne 3 роки тому

    So if now cable connection available, then cannot use? No wireless connectivity for the Kemper?

  • @kevinmac59v2
    @kevinmac59v2 11 місяців тому

    Hello!! Great video!! Can I ask you a question? My band does around a 100 tunes. My question is that it seems that each rigs output volume to the board is never consistent. Our sound person has to tweak my volume on virtually every song. Any thought on how to level that out so it behaves like a miked amp? Thank you!!

  • @georgecraft007
    @georgecraft007 Рік тому

    How do you add and remove rigs from my Android Tablet setup? I watched your video and everything works as advertised, except adding and removing rigs from the Kemper Profiler Stage. This can be done on the PC setup, but I haven't figured out how to do it on my Android setup.

  • @chrisrodsa210
    @chrisrodsa210 3 роки тому +2

    So no Android app?

  • @didouclavist024
    @didouclavist024 2 місяці тому

    Can I connect it with cubase ?

  • @denverwilliams22
    @denverwilliams22 3 роки тому +2

    This is a game changer

  • @Mike-eq3xr
    @Mike-eq3xr 3 роки тому +1

    Can you update the kemper OS with this?

  • @rafbass
    @rafbass 3 роки тому

    Do I need any special hardware to make this work?

  • @MrJimmysixstring
    @MrJimmysixstring Місяць тому

    Hello?!? My Stage has no such WiFi options on the menus…..it’s running 2020 era version, but I can’t update because my MAC can’t run updated rig manager……grrrrr, help

  • @MichaelHops
    @MichaelHops 2 роки тому

    is it possible to download drilling rigs from the Internet via iphone or ipad?

  • @back9ronnie
    @back9ronnie 3 роки тому

    Is this available for the Stage?

  • @brandonlewis5444
    @brandonlewis5444 2 роки тому

    Can’t figure out how to browse other rigs for a slot in performance mode - a significant requirement since it’s fundamental to what a slot does. Do we really have to use the physical browse knob on the profiler? It’s non-obvious if there’s another way. I’ve been searching for 30min now.

  • @graphite-rastry
    @graphite-rastry 3 роки тому +1

    Proč ne taky pro Andriod?

  • @serdneko
    @serdneko 2 роки тому

    iOS iphone no?

  • @MrTupeloFlash
    @MrTupeloFlash 3 роки тому

    Will the rack unit work with a WLAN Extender ?

  • @mostafa8009
    @mostafa8009 3 роки тому

    The tone in the begnning of the vedio ?

  • @heinbldski
    @heinbldski 3 роки тому +1

    Great if it would work :-( Profiler os: 8.5.4.30010, the profiler does get a proper IP adress, the profiler is listed in the network as "kpa" and the profiler is pingable from the ipad. Irig manager 1.0 on the ipad, however the irig manager stays in the screen "Scanning for Devices" and does not recognize the profiler. what am i doing wrong ?

    • @samueljacob3428
      @samueljacob3428 3 роки тому

      I had to install the update twice.. there is a newer version 8.5.6 .. please try that..

  • @kazunorikawasaki7081
    @kazunorikawasaki7081 3 роки тому

    Is it okay if two kempers are connected to the same router?

  • @jodysmusic
    @jodysmusic 3 роки тому

    Does one connect the foot controller to the router as well?

  • @jamesatkinson4386
    @jamesatkinson4386 3 роки тому

    Questions with remote on toaster. Just use a switcher off the router with power over LAN. It will power the remote. It mean I can practice away from the music room with the remote and app. Remember the remote cable is loooong!

  • @joselltemes
    @joselltemes 3 роки тому

    two questions:
    1 - if i connect to the same router a profiler remote does this enable to have both kemper remote stomp and iOS app avaliable?
    2 - will be a rig manager for android?

  • @rodrigovalenzuela7097
    @rodrigovalenzuela7097 2 роки тому

    Hola amigos de Kemper podrian comentar o listar todos los Ipad compatibles para Kemper???

  • @emerson.youtube
    @emerson.youtube Рік тому

    And windows???????????

  • @rafbass
    @rafbass 3 роки тому

    If the network port is already being used by the foot switch, can I still use it somehow? Because my toaster only have 1 Ethernet port, thanks!

    • @TinoSchulz1990
      @TinoSchulz1990 2 роки тому

      Not sure if that works, but you might give a splitter a try. (On your own risk ofc.)

  • @marleynowell1171
    @marleynowell1171 3 роки тому

    i’ve read lots of negative comment of the kemper software crash after updating.. my ios kemper still outdated.. how to ensure my kemper head don’t crash while updating the ios? is there any good advice to makesure its safe to update it?

    • @mrslate1
      @mrslate1 Рік тому

      Backup Backup Backup

  • @roisounds849
    @roisounds849 3 роки тому

    Only for iPAD or it works with iPhone too?

    • @Utube-s8m
      @Utube-s8m 3 роки тому +1

      That’s what a lot us have been asking over and over. It’s useless if it’s just for the cheapest item they make. Make it available to everyone of your customers. Those that spent thousands on the rack or toaster with an expensive remote. Really? And make it compatible with a cell phone. I’m getting tired of this. Next move is another company. I’m
      tired of being polite. Get moving or I will. I can’t be the only one frustrated. We all have enough other serious issues going on right now and in our private lives. This is supposed to be fun not aggravating.

  • @RockYourLive95
    @RockYourLive95 3 роки тому +2

    now do the same thing for android thank you ^^

  • @timjoseph887
    @timjoseph887 2 роки тому

    Wow using Ethernet Kemper continues to be band aided to keep with the modern times

  • @skipkelton
    @skipkelton 3 роки тому +1

    The email says "PROFILER OS 8.5 supports the new PROFILER Rig Editor for iPadOS which allows for wireless control of the PROFILER Stage, Head, and Rack This adds another dimension of parameter editing and fine-tuning of guitar tone at home, in the studio, at rehearsal, and on stage. " - I don't bring a bloody network with me to gigs. So now I have to have a wireless router? And where do I stick that (hey keep it clean folks)?
    Even at home I'm out of physical ports and I have 2 routers. Not really beneficial but hey I have a new app on my ipad.

  • @petersouthern7227
    @petersouthern7227 3 роки тому

    All very good, unless your iPad can't run iOS 13.

    • @Utube-s8m
      @Utube-s8m 3 роки тому

      Not of us have an iPad nor want to spend more money. Other companies are compatible with cell phones.

  • @jeromepujadas7839
    @jeromepujadas7839 3 роки тому

    android please!!!please!!!!

  • @alexnasralla
    @alexnasralla 3 роки тому +1

    You need a PhD in network to make this work... 25,000 steps later... maybe it works.

    • @orbithesun1
      @orbithesun1 3 роки тому

      All you need to do is connect your KPA to a router wireless network and open the app. It connects itself!

    • @Utube-s8m
      @Utube-s8m 3 роки тому

      @@orbithesun1 for an iPad only? Nope. And it’s just too much. Make it simple. It took awhile to figure it out at first. I have the rack. When I sold the toaster, a certain shipper broke it that was a nightmare in itself. The guy who bought it had to be the dumbest person in the planet. I warmed him to watch videos and do research. Did he? No. I felt stuck teaching him how to use it. Total idiot. He told me another seller told him to F off. Now I see why. All the winners seem to find me.

    • @orbithesun1
      @orbithesun1 3 роки тому

      @@Utube-s8m What are you talking about, I don't understand your point?

  • @brandonwilliamsmusic_
    @brandonwilliamsmusic_ 2 роки тому

    Is there a way to import a preset from the iPhone iPad?