@@realdirtyreviews You could have also spliced ( in quick succession ) all of the different configurations ( including - one un-suppressed ) in together so that we could get an idea if there were differences between them - from a couple of different positions so that there was a better comparison.
@@BlessngzgamingDepends on what platform. If it's a beretta or other fixed barrel AB makes a nice F4 or F4L that runs well. But if it's a tilting barrel I'd always recommend an B&T can.
You sound like a moron.. The ATF enforce the laws that are assigned to its jurisdiction. Laws created by the people we put in office. Is a cop corrupt for giving you a ticket? You trumpcucks love to cry “corrupt” when you disagree with the law. Pathetic
Great video, brother! Looking at getting one for my KP9, did you drill it for 9mm or 45 cal? I'm on the fence, balance between better suppression and less blowback.
Honestly, its STUPID that the government even has an issue with suppressors, they dont make ANY weapon totally silent. You can still hear them just fine, and may even still need hearing protection even with a suppressor, so i really do not understand their issue with them other then the its just another way for the ATF to infringe on our rights and to squeeze more money out of people.
I’m interested in this just because form 1s come back in less than a month in my experience, but at nearly $900 for one of these I might as well but a legit can with a good warranty
At those prices that I just looked at for what they want… I’d rather buy a legit suppressor from sig or any reputable manufacturer versus paying actually more for something I have to drill each section myself. The whole point of a solvent trap is it’s suppose to be insanely more cheap to purchase. I’ll wait 6 months or longer for name brand at those prices
Really, you bring other M.F. into your videos and forget about the ones that where there when the sh!t was real. ok, I'll just have to take you down DIRTY!!!! Good luck BOY!!! BTW, this ia AG talking to you.
@@realdirtyreviews use a file... Keep checking depth with a pair of calipers. The bottom side allows you to measure depth. Its not hard at all. Allows more space inside as well. I don't know everything, wont pretend to know everything, but will pass on valuable knowledge to those alike
I paid for my can in May. Received it in oct from silencershop. Roughly 5 months. But form 1s are fantastic and extremely useful
No they’re not. They are a violation of 2A. Fuck the ATF.
Decibel ratings for each configuration would have been a nice addition
Agreed, unfortunately I don’t have the equipment for that
@@realdirtyreviews You could have also spliced ( in quick succession ) all of the different configurations ( including - one un-suppressed ) in together so that we could get an idea if there were differences between them - from a couple of different positions so that there was a better comparison.
@@pinchekittybiker damn y’all want him to bend over backwards while he does it?
@@realdirtyreviewsAre solvent traps the only easy DIY? And on forums ppl say you can't form 1 a solvent trap anymore
I saw this on Mojo's insta story then this came out a few days later. Hell Yeah 😭🤘
Sick review. I’ve never done a solvent trap conversion before. I do however have a lot of suppressors and just can’t get enough.
I appreciate it, I have a few cans as well but was glad I ventured out and built out one of these kits.
@@realdirtyreviews I'll have to give it a try. I do have a couple traps somewhere I could use.
What did u use as a threader or a thread adapter?? Or do I need to buy a professional one?
Any recommendations for my 9mm ?
@@BlessngzgamingDepends on what platform. If it's a beretta or other fixed barrel AB makes a nice F4 or F4L that runs well. But if it's a tilting barrel I'd always recommend an B&T can.
That chopped n screwed koopsta knicca intro music 🔥
Awesome brother. I haven’t forgotten you, got stuff coming sometime, as soon as my manufacturers get their shit together.
Appreciate it 👊🏻👊🏻
Ain’t nothing like a fresh pair of air monarchs.
Nice review and overview of the Form 1 process.
Which direct thread mount did you use? Im also running a KP9. Info would be most appreciated. Thanks!!!
GREAT video man. That's some REALLY impressive production quality. I'm glad I found your channel. Subscribing now and sharing your video.
E forms are awesome. 5 days. Form 1s i think are also amazing
Great video from the editing, shooting and music. You earned a new sub.
Sick!!!!!
How does the aluminum hold up against 9mm? Do you see it wearing out faster? Would it be better to pony up the extra cash for the titanium version?
Aluminum pits out quickly. Not durable at all. Titanium or stainless is the way to go.
Frankly all this asking an incredibly corrupt bureaucracy permission to exercise a right is disgusting.
You sound like a moron.. The ATF enforce the laws that are assigned to its jurisdiction. Laws created by the people we put in office. Is a cop corrupt for giving you a ticket? You trumpcucks love to cry “corrupt” when you disagree with the law. Pathetic
Great video, brother! Looking at getting one for my KP9, did you drill it for 9mm or 45 cal? I'm on the fence, balance between better suppression and less blowback.
Thank you! Drilled it for 9MM because I only intend on running that caliber.
Any new reviews soon ?
I'm subbing don't know how why the algorithm didn't bring up your channel but anyway, what is the first song in your video?
Honestly, its STUPID that the government even has an issue with suppressors, they dont make ANY weapon totally silent. You can still hear them just fine, and may even still need hearing protection even with a suppressor, so i really do not understand their issue with them other then the its just another way for the ATF to infringe on our rights and to squeeze more money out of people.
It would be a good idea if after form 1 approval JKA offered to clip/drill your baffles.
I like the way you think
Awesome vid as always.
😘
I’m interested in this just because form 1s come back in less than a month in my experience, but at nearly $900 for one of these I might as well but a legit can with a good warranty
I got mine approved in 5 months for a form4 with silencer shop. Wouldn't hesitate.
This kit was less than $500
@@voltairee3012 wait times are really good right now
@@realdirtyreviews i would agree. I happened to buy a yhm resonator k. $705 with the cost of the tax stamp, state sales tax, and single shot trust.
Great review!
Thank you 👊🏻
@@realdirtyreviews I've had the JK trap on my short list. Haven't heard anything bad. Guess I need to just get it and start the form.
Do it man!
ATFs most wanted:
1. The Monarch Bandit.
I'll trap your solvents anytime bby 🥵
Ya, that’s some garandthumb vibes that you might want to keep over there
Did you clip these baffles?
I believe we did
Is a "booster" required when shooting a blowback 9mm AR-9 rifle? I heard they're required for handguns, not sure about rifles...
Not,on a rifle.
You didn't show how to build a suppressor you just bought some Legos and put them together how did you machine the holes holds
He laced up the grandfather III’s 🤣 respect tho
Are these still available...or the valve spring retainers?
Good question? I'm curious too!
Is this the titanium or aluminum kit?
Aluminum
What size drill bit did u use ?
Really like this channel. New subb here. thinking about getting this for a form 1
Thank you so much
Is this the titanium version?
I have a vice but no drill press, can i use a hand drill to create the holes?
No
How are you mounting it?
JMAC RRD muzzle device
Cool video
Hi, what's the thread size adaptor to mount it on your ak 9mm? please.
1/2X28
Is it SS or aluminum?
Subbed! 👍🏼
3:37 is that an KP9 I see?
Can you run 10 baffles
Awesome review!!! Nice KP-9 BTW
Might want to revise this or take it down, with the atf just making thing a felony to do.
So ummm.... Texas now.
Song?
In the begining
At those prices that I just looked at for what they want… I’d rather buy a legit suppressor from sig or any reputable manufacturer versus paying actually more for something I have to drill each section myself. The whole point of a solvent trap is it’s suppose to be insanely more cheap to purchase.
I’ll wait 6 months or longer for name brand at those prices
This was a long time ago
If I did everything legal like you did and stilllll got that atf letter id be pissssed
I didnt really notice a difference, and it wasnt that quiet. I wouldnt waste the time and money of a F1 for that.
Really, you bring other M.F. into your videos and forget about the ones that where there when the sh!t was real. ok, I'll just have to take you down DIRTY!!!! Good luck BOY!!! BTW, this ia AG talking to you.
You’re lucky this was made 3 years ago, I almost gave you an automatic thumbs down for the Nike part in the beginning ….but didn’t
Down load a decibel tester on your phone their free then list the #s
Atf has entered the chat.....I mean aft
🤣🤣🤣🤣
I lost my form 1 in a boating accident
Agent Muller
These days get the Form 1 first.
Dude, you didn't even clip em and you like it?? Clip em... Youl see
Everyone’s been saying to do that def looking into it
He’s an amateur.
@@realdirtyreviews use a file... Keep checking depth with a pair of calipers. The bottom side allows you to measure depth. Its not hard at all. Allows more space inside as well. I don't know everything, wont pretend to know everything, but will pass on valuable knowledge to those alike
Not worth the money at all jk armament isn't loyal to customers
Too bad jk armament no longer makes solvent traps
They suck anyways. Their baffle design is from the stone ages, you can get better cones than what they offer.
Still slave made
Hey I know that guy
You haven't made a suppressor at all... you bought a suppressor kit, big difference pal!
Felt like I built it 😬