Opel Vauxhall Vectra Timing Belt Change secrets they don't want you to know
Вставка
- Опубліковано 8 вер 2024
- business and permissions inquires bodgitandleggit@gmail.com
If an Bodgit And Leggit Garage, Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE:
/ bodgitandleggitgarage
paypal.me/bodgitnleggit
ko-fi.com/bodgi...
/ bodgitandleggitgarage
bodgit and leggit garage
tips and tricks inside this video hopefully help you
don't forget get your hands dirty
www.bodgitandle...
bodgitandleggit...
/ bodgitandleggitgarage
/ bodgitandleggitgarage
Disclaimer:
Due to factors beyond the control of Bodgit And Leggit Garage, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Bodgit And Leggit Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Bodgit And Leggit Garage recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Bodgit And Leggit Garage, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained
My friend from the Republic told me the same, the old cars insurance in Ireland are ridiculously expensive to force older cars off the road. 😡
I got rid off my Micra K11 coz it was so old some companies wouldn't insure it anymore. 😢
Nice and long video, thanks for uploading 👍
Your swearing is legendary, had me PMSL. You make putting that belt on look difficult lol.
The best way I found to put the new timing belt on is to put the timing belt on the crank and the cam sprockets first and then bolt the tensioner on last. Adjust the tensioner until you see the bolt hole then fit the the new T40 torx bolt (it Just fits and make sure the t40 goes on straight to prevent cross threading it). It save you punching on getting the belt over the cam sprockets. You can also jam a 8 or 10mm socket between the crank sprocket and plastic cover to prevent the Belt from coming off the crank and I use to hold the belt on the cam sprockets with a binder clip. Either way, that's just the way I use to do it when I worked at Holden in Australia. Good work 👍
I thought England was going the same way in getting older cars of the road but they have not touch us yet mine is 18 and the wife,s is 26 both freelander,s thanks for the video
That bolt... Nightmare, had them before and they are made of cheese so your praying it does not round and also the thread in the head is OK. Not done one of those for years now. Nice video Leon.
Who put that 🤬sump on with trowel of blue sealant 😝
ALWAYS check how the belt spins with the covers off - i've had odd ones aka defective belts from new , 'lateral belt damage' think they call it , belts cut off center from the roll so they where wandering sideways on the pulleys ... new parts these days especially - you never know !
Sorry didn’t say too old to insure in Ireland? Can you explain that to me I’m very confused 😮
The main secret of these old Opels is that their parts supply closed down with the factory.
Recently scrapped a good 2015 owned from new Zafira Tourer for want of a factory replacement engine which was available for £3k, but no longer.
So around 4k lost + the cost of replacing it with a '21 Touran on PCP which will be traded in within 2 years.
Opels are done.
I did one of these on the weekend on my old Zafira. I went through 3 new tensioners! Because try as I might, the arrow markings on each of them did not and would not shift and line up!!?? I could not get any tension in the belt at all. I've done these before many times and never had any problems.I could not figure out what the hell was going on and still don't know. I had to manually set the tensioner at its tightest point and shift the water pump around until tension became correct. Nightmare. Cheap, dodgy parts I blame as everything was spot on. ?
I thought you did the tensioner thru the wheel arch
That’s how I always do them
How would you rate vauxhall insignia good car or bad
Sorry? Can't insure it due to the cars age? WTF!! Thought we had it bad in the UK. Yikes.
Directline wouldn't insure my 2001 Micra K11 anymore couple of yrs ago. They said it was no longer listed in the cars they insure.
@@bartoszk4812 Did you try a classic insurance specialist?
Did you say "too old to insure"?
Yes very common issue I am coming up against time and time again
That's stupid! Is (for example) a ferrari f360 too old to insure?😂😂 How do they make those decisions?