you make quality videos. Awesome. But we need a video of how to connect two routers via VPN site to site using one Asus router from your other videos and one DD-WRT router.
Dear Behfor, has MX64 PoE ports to connect directly a AP without external power supply. If not is there a kind of adapter to provide PoE. We do not have power sockets where we want to assemble the AP.
Thanks so much! the MR18 is a PoE Access Point and because of that it is more convenient to connect it to a PoE enabled port/device such as the MS220 8P Switch! Unfortunately the MX64 doesn't have any PoE ports and if you connect the MR18 to it you'll also need a PoE injector or a power adapter which by the way is not included in the MR18 box! So the answer is yes you can but with the help of a PoE injector or a MR18 power adapter, thanks!
As far as I know there is no such a thing as MOTD in Meraki! Again as far as I know MOTD was useful for CLI, Meraki however uses GUI! You can add "Notes" for each switch though if that's what you are trying to do! Thanks!
Is there any security concerns for using VLAN 1 for anything (mgmt or otherwise)? I know in the Cisco enterprise world, they teach VLAN 1 should never be used despite it being the default native VLAN?
Dear Behfor, first I will thank you for your excellent support by your videos. Now I understand how I can configure my Meraki products on cloud network. In the meantime I have bought a MX64 and a MS120-24P switch. I have configured these devices. Now I have a question. I have a server datacenter with 2 NIC-cards. May I connect one NIC-card to the MX-64 for connecting the internet for updating windows server and the other NIC-card to the MS120-24P switch for the intern network ? Or isn't it necessary and must both NIC-cards to connect to the MS120-24P switch in two different VLAN's ? And can I configure the server with static IP addresses even printers and other end-devices ?
It's a great video, thank you. I have a question, I see you have two VLAN's 10 y 20 for Wired and Wireless, in this configuration can you communicate a Server in VLAN 10 with a Laptop in VLAN 20? Or do you need further configuration?
Thanks! The devices on different VLANs should be able to communicate with each other unless you restrict their access in the firewall. For example in this video there is no restriction for VLAN communication (except the Guest SSID which is isolated). For more information please check out the following link. Thanks! documentation.meraki.com/MX/Networks_and_Routing/Configuring_VLANs_on_the_MX_Security_Appliance
@@Behfor Thank you very much again, I really appreciate your help, in your videos you explain in a simple and effective way that everything seems so simple
Im looking forward to see how to configure failover use of port 4 as backup, and how to manage the devices and see what resources they are able to access so as to prioritise onthe resource.
Behfor to start you will have a future problem with the calls there. Look carefully at the network cable you are connecting? The ones are practically skinny. Well-wired wiring is good practice to avoid connection problems. But otherwise good presentation thanks for the tips.
Thank you so much! I'm glad you liked the videos! Unfortunately I don't have a video on Meraki Site to Site VPN yet, but it's on my list and hopefully I can make it soon, thanks!
hi. nice to watch ur informative videos. i am here to share my problem with you. Hope u ll find a solution. My tplink router falsely says "wan cable is unplugged". 1. Even the cable is plugged. 2. Another router is working properly at the same place instead. 3.The most stunning thing is that the same router works well at another place. what's that?
Hi, thanks for the question! Basically problems like this could be due to a bad cable, bad port, issues on the upstream device and etc I would start with trying different cables to rule out any cable issues. i can also connect a computer directly to the modem and see if the computer has internet connection, this would tell me the upstream device is fine. Good luck!
@@Behfor thanks for ur reply. in fact cable is working well because i tried another router and it started working. Is there something to do with the data stream load on the main modem?
Hi sir videos were great. i understand and construct every video. i just wonder if u have a video or maybe reply if u may. how to connect vlan 1 10.2/24 wired from vlan2 20.21/24 wireless, just for example. hope u notice me thank youp
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
![Cisco Meraki EP 06 - Site-to-site VPN [Auto VPN]](/img/n.gif)
Good video, these are the types of videos that are the very backbone of youtube :-)
Glad you think so! Thanks :-)
Very engaging and informative videos. Most enjoyable - keep it up!
Thanks so much 😀👍
This is awesome. Thank you. More videos please
Hi Behfor
thank you for this great episode posting for us very use full
Hi, thanks for your comment! I'm very glad you liked the videos 😀👍
Perfect explanation ! thank you sir
Most welcome!
Awesome videos!
Thanks 👍 👍
Please do more of this Meraki series!!
I will! Thanks so much :-)
Thanks!!! Is nice to hear you and is very explained.
Thank you so much! I'm very glad you liked the video :-)
you make quality videos. Awesome. But we need a video of how to connect two routers via VPN site to site using one Asus router from your other videos and one DD-WRT router.
Please send more router videos and network testing videos! Great job.
Dear Behfor, has MX64 PoE ports to connect directly a AP without external power supply. If not is there a kind of adapter to provide PoE. We do not have power sockets where we want to assemble the AP.
Very well explained ... thanks for video... just a quick question... can i connect MX64 directly to MR18 ?
Thanks so much! the MR18 is a PoE Access Point and because of that it is more convenient to connect it to a PoE enabled port/device such as the MS220 8P Switch! Unfortunately the MX64 doesn't have any PoE ports and if you connect the MR18 to it you'll also need a PoE injector or a power adapter which by the way is not included in the MR18 box! So the answer is yes you can but with the help of a PoE injector or a MR18 power adapter, thanks!
@@Behfor Thanks for explanation...
Probably a silly question but is it possibly have something like the CLI Banner MOTD or something equivalent on Meraki Switches ?
As far as I know there is no such a thing as MOTD in Meraki! Again as far as I know MOTD was useful for CLI, Meraki however uses GUI! You can add "Notes" for each switch though if that's what you are trying to do! Thanks!
Is there any security concerns for using VLAN 1 for anything (mgmt or otherwise)? I know in the Cisco enterprise world, they teach VLAN 1 should never be used despite it being the default native VLAN?
Mersi for your helpful video 🙏✌💐
You're very welcome! Thanks for watching and Mokhlesim :-)
Dear Behfor, first I will thank you for your excellent support by your videos. Now I understand how I can configure my Meraki products on cloud network. In the meantime I have bought a MX64 and a MS120-24P switch. I have configured these devices. Now I have a question. I have a server datacenter with 2 NIC-cards. May I connect one NIC-card to the MX-64 for connecting the internet for updating windows server and the other NIC-card to the MS120-24P switch for the intern network ? Or isn't it necessary and must both NIC-cards to connect to the MS120-24P switch in two different VLAN's ? And can I configure the server with static IP addresses even printers and other end-devices ?
It's a great video, thank you. I have a question, I see you have two VLAN's 10 y 20 for Wired and Wireless, in this configuration can you communicate a Server in VLAN 10 with a Laptop in VLAN 20? Or do you need further configuration?
Thanks! The devices on different VLANs should be able to communicate with each other unless you restrict their access in the firewall. For example in this video there is no restriction for VLAN communication (except the Guest SSID which is isolated).
For more information please check out the following link. Thanks!
documentation.meraki.com/MX/Networks_and_Routing/Configuring_VLANs_on_the_MX_Security_Appliance
@@Behfor Thank you very much again, I really appreciate your help, in your videos you explain in a simple and effective way that everything seems so simple
Is it nessecary to connect a MR18 to another Cisco Meraki device or can I use it with any router ?
Im looking forward to see how to configure failover use of port 4 as backup, and how to manage the devices and see what resources they are able to access so as to prioritise onthe resource.
Behfor to start you will have a future problem with the calls there.
Look carefully at the network cable you are connecting?
The ones are practically skinny.
Well-wired wiring is good practice to avoid connection problems.
But otherwise good presentation thanks for the tips.
Awesome!! very well explained. Do you also create CCNP enterprice course?
I have a question, do I have to buy a license separately to manage my devices through the dashboard?
Yes, each device needs a license as well
very pleased with your level and quality of the training... i'm trying to connect mx64 to mx64 via vpn...
site to site ...any videos about this?
Thank you so much! I'm glad you liked the videos! Unfortunately I don't have a video on Meraki Site to Site VPN yet, but it's on my list and hopefully I can make it soon, thanks!
How to hard reset MR26
Dual-radio 3x3 MIMO 802.11n access point
with third radio dedicated to RF and security. Thank you
hi. nice to watch ur informative videos.
i am here to share my problem with you. Hope u ll find a solution.
My tplink router falsely says "wan cable is unplugged".
1. Even the cable is plugged.
2. Another router is working properly at the same place instead.
3.The most stunning thing is that the same router works well at another place.
what's that?
Hi, thanks for the question!
Basically problems like this could be due to a bad cable, bad port, issues on the upstream device and etc
I would start with trying different cables to rule out any cable issues.
i can also connect a computer directly to the modem and see if the computer has internet connection, this would tell me the upstream device is fine.
Good luck!
@@Behfor
thanks for ur reply.
in fact cable is working well because i tried another router and it started working.
Is there something to do with the data stream load on the main modem?
Pro tuto
Hi sir videos were great. i understand and construct every video. i just wonder if u have a video or maybe reply if u may. how to connect vlan 1 10.2/24 wired from vlan2 20.21/24 wireless, just for example.
hope u notice me
thank youp
Hi, really great video, thank you.
You're very welcome! Thanks for watching :-)
Hello friend, do you like fingerprint lock ? I'm a seller on Aliexpress, i need your help, thank you