Installation | Midsize DECKED Drawer System Install Video
Вставка
- Опубліковано 5 січ 2025
- A riveting video experience, check this step by step guide for installing the new midsize DECKED Drawer System in a pickup truck. Covers each of the steps and offers a great way to spend ten minutes of your life which will save you 120 in the end. This is NOT the video for DECKED’s original Midsize Drawer System. If you have one of these watch this video:
DECKED offers FREE shipping right to your door. While this video is intended for consumers, this is also a great guide for retailers and other interested customers.
#DECKEDUSA #WorkSmarterPlayHarder #MadeInAmerica
Shop the DECKED Truck Bed Drawer System: decked.com/pro...
SUBSCRIBE: / deckedvideo
Instagram: / deckedusa
Facebook: / decked.usa
Learn more about DECKED systems at DECKED.com: decked.com/
I just finished installing the 2.0 on my new Jeep Gladiator. I gently used my impact driver on level one with no issues. Perfect storage system for my overland camping setup on my channel. My wife helped with the lifting, and it didn’t result in a blowout fight. So, it’s an easy lift. Overall, excellent quality kit for my needs.
Glad the company listened to the consumers… this was how the decked system should have been designed in the beginning. Looks great and functional.
The screws at 6:14 were not included in the drawer HW bag. . . or maybe it is the next set that is not in the drawer HW bag. Instructions leave plenty of guess work to do. Not quite as bad as most Chinese instructions, but close.
Yes! This is what I was thinking of in my other comment. All the hardware ended up being there, just not where expected. I believe some was slightly different then pictured as well
I just finished installing on my 2023 Tacoma short bed. I love it. I’ve been wanting one for many months now. The instructions could be better. Whoever decided to put the images on the backside of the written instructions instead of side-by-side should be on the wall of shame for at least 2 years.
I installed mine today. The images being on the back was wildly upsetting lol. The instructions in general were pretty tough to follow
@@quintonwalker1668it was the hardware differences that messed wjth me the most. I can’t remember exactly what it was but the hardware was very similar but not exactly what was shown. It also had the correct hardware quantities overall, but not exactly in the packages shown as I recall.
Now I’m here to review the install process to see what I’m in for to pull the thing, chasing rattles. I think the thud I’m hearing is between the bed and the frame, needing a rubber bushing between them.
The written instructions are decent vut could definitely be improved, would like to see an explided view of the screw or bolt that goes along with the installation step. Mines already put together and i really like it.
Did anyone else have the problem where the drawer doesn’t fit? It rides too high and hits the top deck and doesn’t close/open without a lot of force. I disassembled and reassembled a large portion but haven’t been able to fix it. I also noticed that the some of the steps in this video and instruction manual are different, but I don’t think that effected anything. I have a 2019 Ford Ranger.
Waiting on feedback from Decked now.
Smack the weather stripping down with a rubber mallet, mine wasn't seated all the way and I had same issue. That fixed it for me
My drawer system was a pain in the ass. The instructions were decent but did leave out some stuff like. When building the big ass box make sure the sides are flush with the back and the aluminum bottom might slide forward causing the drawer box to be bigger than expected. I had to take that thing apart 3 times to realize the rails slid forward during the big box installation. Long story short got it done and now I love it. It was worth the pain
Yes, I installed mine today and am having this exact issue. I actually had to remove the weatherstripping completely to properly close the drawer. Also waiting on some assistance from Decked's service team.
EDIT:
I emailed the Decked service team and they got back to me very quickly. Within 7 days I had a new updated drawer face. I had already trimmed my original one with the Dremel so the replacement is currently sitting in the garage. I cannot speak to the fitment of the replacement but the customer service response was excellent.
@@bradanderson5494 I realized that you have to slam the drawer pretty hard to get the box to close after the first install. I think that's because it's new. It's been about a week now and it closes fine with the weather stripping. I had the same issue. My suggestion is push it hard to close and after a few times it will get worn in and it'll be smooth like butter.
@@veritasluxmea76Good to hear. Thanks for sharing your experience. Hopefully mine goes the same.
That looks great! I haven't purchased a system yet as I didn't like the space that was limiting in the old drawer system but this looks like it will work for me the best! Great work!
Does the 2023+ Colorado come with all the same size turnbuckles? All of mine are the same size and I cannot get them tightened down on the cab side….
Can a fit a golf bag in the pull out drawer for the midsize? Looking for a solution to dragging my golf bag in and out of my gladiator bed.
Where can I get the replacement screws with gaskets. I have a older model and all my gaskets wire out and need replacement
For those installing on a 2023 Canyon, you will have tonget shorter turnbuckle for the ones nearest the cab. Only thing that didn't work out for me. But ....
For the price you pay for this thing and the size box it comes in, it really could come pre-assemble with everything but the the 2 wing portion and the bars that you insert into.
That'd be a pretty penny for shipping costs!
@@Decked the box it came in is bigger than decked system.....
I have a 22 Nissan Frontier. Is it true that I cant use my existing bed tiedowns and would have to drill my bed and install nutserts to mount the decked system? Why cant I use my factory tiedowns? Wrong location? The thought of drilling the bed is stopping me from purchasing.
We use the factory tie downs in your bed. Some Frontiers do not have cabside tie downs. Therefore you'll have to drill holes to add them
Will this fit in a 2024 Tacoma Trailhunter?
Yes, just installed onmy 2024 Offroad 5" bed.
I have already bought one for my Gladiator last year. I am glad yall ditched the 2 drawers for midsize as there is a lot of wasted space that could have been used. Plus the added cubby to the front, also a lot of wasted space that could have been used on the older models. Its always my luck, I buy something, then a new more usable model comes out.
I am thinking about breaking out my sawzall to cut and add piano hinges to the front of the bed so I can use that space that is wasted in front of the wheel well on the gladiator.
Shoot us an email at Social@DECKED.com! We may have a solution for ya!
Just got mine delivered today. Plan to do it in my 3rd gen Tacoma. Anyone with Tacomas have any tips when installing?
Awful tbh can’t seem to figure out a fucking way to get the backplate on
@@Gigagoose1I was able to install mine pretty easy. Did you install it on the ground?
What do you mean by this? Shoot Service@DECKED.com an email so we can assist!
My drawer doesn't close with the weather strip installed...
Same here, I tapped it with a rubber mallet to make sure it was seated all the way down, that fixed mine.
Shoot us an email! We've got a fix for you! Service@DECKED.com!
Already have y'all told me to take it off it works without it lol
@@Longster4U…..Hey! Did you figure out anything else besides taking the weatherstripping off? I’m having the same issue.
@@justinsmith9889Did you get your drawer to close properly?
When someone starts off an instructional video with "In a world with crappy instructions" I feel that, and I know I'm in for some good instructions. Nice.
🫡
I don’t know why you’re buying it for security and it doesn’t come with the locks who sells something without locks. What’s the purpose of this and by the way if you buy for the 2024 Toyota Tacoma it does not fit.
I have to install mine by myself. No real friends in my life.
Real men don’t read instructions we just have leftover screws 😂
Nailed it 😂
There is no reason to lay on your back to install screws towards the end. I just flipped the box over and put mine in.
Get a different guy
Installing in the texas summer 🫠 dear god, that was miserable. 😅