VXDIAG VCX NANO GM GDS2 Tech2win New Easy Installation- obdii365
Вставка
- Опубліковано 23 лют 2020
- Here's the easy version installation guide of vxdiag vcx nano gm/opel GDS2 and Tech2Win software on windows 7 operating system.
www.obdii365.com/wholesale/vxd...
install both software in one video guide.
We have another two videos to install GDS2 and Tech2win software separately which is more difficult than this guide.
i.e install vxdiag gm gds2 v2019
• Video
install vxdiag gm tech2win
• How to install VXDIAG ...
GDS2 can only work on win 7 64 bit and win 8 64 bit,Tech2win can work on both win7/win8/XP 32bit and 64 bit. - Авто та транспорт
Thank you so much! This video saved me hours of potential headache!
tech2win freezes when attempting to establish a connection to my 2005 chevy silverado. it asks for the radio it has, then the type of hvac it has, and then freezes.
Can I use this to turn on “afterblow” on my 2015 corvette AC system? I still have not even figured how to get this running for my 2005 tahoe, help!
Please help!! What Can I DO IF I MISSED THE PART TO UNCHECK Run VX manager/visit website?
if missing vx manager, download latest version from www.vxdiag.net
Do you know that I have got this device (VXDIAG) since Feb 2020 and until now I am not able to use it and operate it to communicate to the vehicle (both GM and Toyota/Lexus)
did you well installed software? post error screenshot or video to aftersale service for help
No virtual machine needed for GDS2 if I'm using a 32 bit version of Windows?
GDS2 can only work on win 7 64 bit and win 8 64 bit,Tech2win can work on both win7/win8/XP 32bit and 64 bit.
Im getting an error E4403 once I try adding the vehicle. I tried all the updates, tried skipping the updates, etc. And still will not work. Im on Windows 7 64bit. Any help would be appreciated.
did you install passthru and GM VCI driver?
Can you reflash modules on 2012 Cadillac CTS coupe as well as others with this or should I look at purchasing Tech 2 or MDI, dealership are ridiculous and charge per module to reflash 😮
yes, but you need subscription from acdelco. MDI2 or vxdiag both works, see example blog.obdii365.com/2022/05/31/2018-chevrolet-corvette-ecm-programming-with-gm-mdi2/
@@LiuyangOBD365 THANK YOU SO MUCH I AM A DISABLED VETERAN ON FIXED INCOME
Thank you for this video! Mine worked perfect. Is the countdown timer for the days left real? Or can I simply reload the software when it expires?
there is renew function in vx manager. just renew the license.
@@LiuyangOBD365boss good morning I need help from you which is the best software for range rover and Jaguar and also cheap and best which scanner
Does anyone know if this will work with the oem software? I work for chevy so i dont need the cracked software
It support GM TIS2WEB online Service Programming System (SPS) but Needs GM Account
@@LiuyangOBD365 May I ask does it support acdelcotds.com ( Online subscription)
Hello, what Windows did you use to install these softwares, on your laptop? Did you use Windows 7, 8, 9, 10, or 11? Or, does it matter which one you use?
GDS2 Win7 or Win10, tech2win better Win7
@@LiuyangOBD365 , Hey, after you install the software, don't click on the stuff, until I connect it to the VXDiAG?
Do you have a video on how to do SPS programming using this device?
here is a video demo ua-cam.com/video/8wFChuwUfew/v-deo.html . but GM now has changed to a new Techline Connect SPS2 platform. The setup is a little bit different, programming procedure is the same.
@@LiuyangOBD365 do we have to pay for the GM subscription to be able to program and pair devices with vehicles on this device?
Hello! I get an error on gds2" Pc Software installation Error(or missing Server/DLL/API)" it pops up when im selecting the diagnostic to select my vehicle..
did you install Patch as well? we got a new installation guide, search GDS
Which patch this dps with the password? @LiuyangOBD365
Could you help me ? Recently purchased can’t get passed gsd2 screen
I’m at 3:48 in the video
contact customer service and check via Teamviewer
For sps support ?
yes, need account
Does it need to be plugged into the car obd2 to do this?
software installation does not require the device to be plugged into car
@@LiuyangOBD365 Thanks, I was able to use the device as a pass through for gm techline sps to reprogram the software in the used ebcm but I still have a b3902 code in the ebcm stating Incorrect Immobilizer Identifier Received. Not sure how to change the Identifier in the ebcm. Theres no ebcm reprogramming option in the IMMO section. Not sure if I need to reprogram the BCM IMMO or not. The car still starts and runs fine with no engine light. I dont know where to go from here.
Upon opening GDS2, I get the message "No valid lease found"
do you install patch and vci driver? the error usually caused by missing patch
Regarding GDS2, when I attempt to connect the device it won’t let me connect as a MDI2?
did you install the VX Manager and Passthru driver?
OBDII365 sales yes. I figured out the problem was GM MDI must be installed before vx manager.
Kiy ye 7 windows main kam karta hai scend generation ka hai leptop
GDS2 Win7 and Win10 ok, Tech2win better on Win7 32bit
What about TIS 2000?
for TIS2000, you need a tech2. vxdiag comes with gds2 and tech2win software only
Can I install on my windows 10 tablet?
GDS2 yes, Tech2win need luck, T2W better on WIn7 32bit
I have a mobil demand windows 10 tablet
@@reypalma9006 Tech2win on windows 10 need luck, some did it, some failed. better on win7 32bit
I install already I just need to try it on a car to se if it works properly
I don't even own a PC or tuning laptop with a CDROM Drive. In fact I don't know anyone who still owns a PC that uses them anymore. This is 2021, for the price you pay it could at least come with a USBDrive for the software. All the software on the website is outdated and a pain in the ass to install. I don't doubt it would be an awesome tool. But the software off the website crashes every time I try to do anything in the BCM Options. My actual Tec2 works just fine.
GDS2/tech2win is PC based program. A second-hand laptop is very cheap. Download latest sw, vx manager and patch, follow guides and installation is not that difficult
@@LiuyangOBD365 Way ahead of you, I build custom PC's and Software programing as a hobby. Program works fine when it wants too. 9 times out of 10 when you execute a command inside tec2win the program will Crash To Desk Top. Format/Fresh Win Install and updated drivers did not fix the issue. Its an issue within the downloadable software itself. Website is a pain in the ass to navigate and a couple of the download links are broken or at least they were in November. Now, that being said I have a friend with the same tool and it works fine on his older laptop. But I'm not going to run out and buy another older used laptop when I actually have a Tec2 in my garage. Just being honest, With a program redesign this would be an awesome tool to have as its more compact, easy to store and way more affordable then a Tec2 for the average person.
GDS2 Error 6
more detail and error screenshot?
THIS PRODUCT IS A SCAM. try to download the software, some is just broken links, the others have viruses.
it works once you get software installed. disable anti-virus program before installing software. check latest 2023.10 version installation video, it is easier
@LiuyangOBD365 I have a windows 7 company i bought specifically for this software. Then I find out GDS2 won't run 2023.10.19 (I keep getting error) which all you can find online. How do I find a compatible version now..help :(
@@nbtextremes I don't know. I just spent the last 2 days trying ti figure it out. I think we got scammed.