Sup man! I'm just the exact size, so you don't have to worry too much. I'm using the powerparts seat, that increase almost a cm up, being higher and had no problems at all! Cheers
Hi there, awesome sound! Is that exhaust the Euro4 version of the Conic Silencer (made for the 2017-18 SDR), or is the one used on the previous versions (no Euro 4 homologation)? It looks like the non-Euro4 homologated version from the 201-2016 SDR. Just want to make sure, because I have got the 2017 SDR and want to put the same slip-on like this one here. :-)
Thanks! This can is the previous version, with removable dbkiller, the amount of sound with the original cat and no dbkiller is pretty nice and the bike runs just fine. I just installed the bodis decat and i think it can be too much running without the killer, i will upload a new video trying to get the same recording levels and using the baffle to see the diferences! Cheers 🤙🏼
I knew it that the previous version fits the new bikes. :-) This slip-on is also €50 cheaper than the Euro4 version and I suspect that the new version might even be with non-removable db-killer, in order to be able to maintain the Euro4 homologation... I am definitely getting the same as the one on your bike. :-) If you did install the bodis decat, then make sure you re-map (Akrapovich map by KTM dealer will do just fine) and remove the SAS flaps. With the original fuel map, but with no cat or cat valve, you will get hard popping on decel and the engine will run on higher temp... not so good in the long run. Would love to see the video and hear the sound of that can with the bodis decat though. :-)
Yeah, go with the older version :) I know, the bike is remapped and i'm just waiting to receive the SAS kit! Had to came from the dealer and even with the original cat, the popping decel's were like bombs haha Ride safe!
Agree the sound is awesome and it looks better than the Conic version for SDR'17. Do you know/ can you check if the Side Bag Set from KTM Power Parts can be used along with the muffler, ie. the bags can be installed and there is no direct hot air flowing onto the bag?
I'm thinking of upgrading to the SDR and I only need a slip on because I mainly just ride to work. So is this the sc project S1 can? And do you think it's necessary to do a remap and sas removal if you just get the sc slip on? Thanks.
Tipz n Trickz Hey ya! On that video I used just the slip on for almost a year, and the bike was perfectly fine, so you don’t need to remap anything. The exact model is the conical, I found the s1 model a bit small, but that is your choice, both will be the same. Cheers 🤘🏻
Hey! Thanks for the sub, i am a bit busy on real life things, so that plus the winter, couldn't ride as much as i wanted, but will try to start editing and doing more vids for sure! The SC Project exhaust it's just the slip (conic version) but i installed the Bodis decat, along with the removal of SAS and the Akrapovic map at KTM dealer. Bike runs perfectly and the sound is amazing. Thanks for tunning in! Ride safe
Wow .. nice sound n most important the location is loved❤
Great video! And that sound! Freaking amazing!
Gefällt mir ! Very nice Sound 👍
Thank you man!!
i liked this before even watching it.
hi.how tall r u?
im thinking about 1290r sd.
im 1.72m
Sup man! I'm just the exact size, so you don't have to worry too much. I'm using the powerparts seat, that increase almost a cm up, being higher and had no problems at all! Cheers
Hi there, awesome sound! Is that exhaust the Euro4 version of the Conic Silencer (made for the 2017-18 SDR), or is the one used on the previous versions (no Euro 4 homologation)? It looks like the non-Euro4 homologated version from the 201-2016 SDR. Just want to make sure, because I have got the 2017 SDR and want to put the same slip-on like this one here. :-)
Thanks! This can is the previous version, with removable dbkiller, the amount of sound with the original cat and no dbkiller is pretty nice and the bike runs just fine.
I just installed the bodis decat and i think it can be too much running without the killer, i will upload a new video trying to get the same recording levels and using the baffle to see the diferences!
Cheers 🤙🏼
I knew it that the previous version fits the new bikes. :-) This slip-on is also €50 cheaper than the Euro4 version and I suspect that the new version might even be with non-removable db-killer, in order to be able to maintain the Euro4 homologation... I am definitely getting the same as the one on your bike. :-) If you did install the bodis decat, then make sure you re-map (Akrapovich map by KTM dealer will do just fine) and remove the SAS flaps. With the original fuel map, but with no cat or cat valve, you will get hard popping on decel and the engine will run on higher temp... not so good in the long run. Would love to see the video and hear the sound of that can with the bodis decat though. :-)
Yeah, go with the older version :)
I know, the bike is remapped and i'm just waiting to receive the SAS kit! Had to came from the dealer and even with the original cat, the popping decel's were like bombs haha
Ride safe!
Agree the sound is awesome and it looks better than the Conic version for SDR'17. Do you know/ can you check if the Side Bag Set from KTM Power Parts can be used along with the muffler, ie. the bags can be installed and there is no direct hot air flowing onto the bag?
I'm not 100% sure, but the exhaust uses the same bolt and it's smaller than the standard exhaust, so it should fit perfectly.
I'm thinking of upgrading to the SDR and I only need a slip on because I mainly just ride to work. So is this the sc project S1 can? And do you think it's necessary to do a remap and sas removal if you just get the sc slip on? Thanks.
Tipz n Trickz Hey ya! On that video I used just the slip on for almost a year, and the bike was perfectly fine, so you don’t need to remap anything. The exact model is the conical, I found the s1 model a bit small, but that is your choice, both will be the same. Cheers 🤘🏻
Beautiful bike , I've subbed and would love it if you could do a walk around of your bike
The sc project exhaust ? Is that just a slip on ?
👍🏻
Hey! Thanks for the sub, i am a bit busy on real life things, so that plus the winter, couldn't ride as much as i wanted, but will try to start editing and doing more vids for sure!
The SC Project exhaust it's just the slip (conic version) but i installed the Bodis decat, along with the removal of SAS and the Akrapovic map at KTM dealer. Bike runs perfectly and the sound is amazing.
Thanks for tunning in! Ride safe
Is that a complett exhaust System ?
On this video it's just the SC project slip on. On my last video it's the same exhaust, but with the Bodys decat installed!
aleluia subes videoo!!!
Han pasado unos meses cierto... a ver si ya nos viene el buen tiempo y empezamos a grabar mas!! Gracias por pasarte por aqui! 🤙🏼😎
Remove cat !
Already done! Will upload a new video soon! :)