Engrave Your Logo Like a Pro: Step-by-Step Guide for a 40 oz JDS Tumbler
Вставка
- Опубліковано 1 жов 2024
- In this video I show you step by step instructions on how to use the PiBurn Grip and engrave a 40 oz JDS tumbler with fixed handle. This project is a simple engrave, single logo. I will show you how to align your tumbler with the gantry the easy way. Show you how to frame your design the safe way and use some of the manual features with the Bolt controller features. This will take you step by step with lots of tips and tricks!
Note: if you own a rotobolt, this tumbler will not fit. The handle hits the main rail. Rotoboss has sent me larger drive wheels and they do work. If you need to do these tumblers and you have a rotobolt please reach out to Rotoboss for options.
Thunderlaserusa
www.thunderlas...
ROKO Twister Tray (USA Only for now)
computercreati...
PiBurn Grip
www.lensdigita...
00:06 - Start
00:39 - Aligning your Grip to the Gantry
02:02 - A Jig for finding 180 degrees from middle of the handle
03:09 - Further Grip setup
05:46 - Using the Manual Feature in the Bolt Controller (Great Feature)
06:19 - Manual movement of your Tumbler
07:02 - LightBurn Layout of 40 Oz Tumbler
10:33 - Framing your tumbler before you engrave
11:19 - Tips to keep your Laser Head Safe if your a Newbie!
13:31 - Engraving the tumbler
16:20 - Storing a specific spot you want your laser head to go!
19:17 - Conclusion!
Excellent tutorial - thanks for sharing!
Hi there :) With the Thunder Bolt, can you do a full wrap on a 40 Oz tapered Stanley (removing the handle) using your twister tray? If you can, do you set up the tumbler like you did in the video where you demonstrate the 3 degrees angle and the digital gauge? Thanks...
yes I set it up the same way in the Bolt. and yes the twister tray allows you to do 40 oz dupes as long as you have a rotary that allows that much adjustment
Hi dear Computer Creationz team, can we send our machine to you for review?
At this time I am not accepting any lasers for review. But thank you for your offer!
is the Bolt's electronic controller a Ruida version please?
Yes!
Excellent video - thank you!
thank you
Great Vid thanks!
Thank you !
Great Video! Would love to see a similar video with the RotoBoss that is sold with the ThunderLaser Bolt.
Do you think the PiBurn is a better tool for tumblers with the Bolt rather then the Roto Boss? I understand that this might be a hard question for you to answer since you are loyal to all 3 brands. If you would rather answer via e-mail that’s understandable. We just bought the ROKO Twister Tray from you and are awaiting its arrival.