Do NOT do this without first sealing the photos. Either laminate them with plastic and leave a small border of clear laminate, or seal them both side with 3 layers of clear glue or Mod Podge.
I have already uploaded full video you can check it out Use good quality sheet in resin ( I'm using waterproof glossy sheet ) if u can't find any pls laminate it
Hi.. was the glitter you added first liquidy? I have seen glitter glues was it that? Won't it ruin resin or something? Like will it dry with resin or be wet like that 🤦🏻♀️
You can put a couple layers of mod podge on both sides of the photo before putting it in your mold. I noticed you posted this comment 3 months ago, but i at least hope this helped.
4 cm for this mold You can just measure the size of your mold and cut a piece of paper and put into it to know whether it's fits or not and measure it's sizes
Doesn't say exact amount coz I have mixed little more for other works also you can mix it in a little amount and use the balance for any keychains or else
@@Sherin_laza Thank you for your reply 😊 I mostly use laminated photos as without them photo color bleed out so tacky tape is visible from the laminate portion .so is there any other way please share that mam
![도자기 트레이 만들기 : Making a ceramic tray [ONDO STUDIO]](/img/n.gif)
Wow so beautiful👍
Do NOT do this without first sealing the photos. Either laminate them with plastic and leave a small border of clear laminate, or seal them both side with 3 layers of clear glue or Mod Podge.
No need if the print is print is water proof
If I didn't find any there is only need of laminatiny
Photo canava app iIl set aakuna video idumo ❤
Whether the normally laminated photos put inside the resin?? Pls reply
Plz, tell name best resin for transparent and hard photo frame. What ratio
How to keep that chain connecting hole
price how much
Normal colour print aano
Dry kon se machine se krty ho.?
Initial Resin How Much?
Ee mould online kittumenkil linl ayakamo pls
Photo is laminated hai or normal photo hai mam plz reply
Which photo print is this?
Wow very nyc
How do you get the pictures so small? Does you use a software or editor?
Pilz reply on it ..❤
Ithu online aayi onnu padippichu tharavo
Round mould keychain size?
Ithule eppadi otta poodrathu
How much price?
Wowww
Antha resin kancha piragu hard haa irukuma illa leather mathiri irukuma
❤️💖💕10/10
💖
1. Before adding the pic, did the first completely dried.
2.How much time it takes to get dry?
Yes depends upon the resin you use 5-7 hrs
Sis is this normal photo u used in this r some other sheet
Spray kiya kiya
Very nice, It was really helpful, also please wear gloves while doing these activities❤😊
❣️it's not that much necessary if you can do it carefully without touching it ( but it's better to use)
Please can you put a video where you explain the treatment for the pics… because I know that normal paper can get dark with resin.
Thank you
I have already uploaded full video you can check it out
Use good quality sheet in resin ( I'm using waterproof glossy sheet ) if u can't find any pls laminate it
I I want to take my daughter things n make a mold of it. What to buy
And heart shape ka photo size boliye mam plz
Alguien sabe dónde se compra la resina?
Mold size
Love love love it 💕💕💕
🍃🖤
Y kon si shape bnany vali cheez H or dala kia H ander
Photo size
How will this key chain feel like to touch? Like glass or gel?
Like a plastic material it's surface will be smooth & it doesn't break like glass
The resin cures (goes hard)
2 inch round mouldn ethra size photo venam ? plz reply
Key chain kha say milyga
How did u attach the chain.
By drilling a hole in it. Drillers come for it
Adorabili ❤🥰
❤️🩹
Hi.. was the glitter you added first liquidy? I have seen glitter glues was it that? Won't it ruin resin or something? Like will it dry with resin or be wet like that 🤦🏻♀️
Not it wasn't glitters, you can't use that it's normal glitters I have added it to resin which is already poured in mould
Its funny that no one realizes these are being made upside down
Hiiii pls let me know how you did it without any bubbles??😍
Using bubble buster spray
How to order
Wow fantastic idea
Thank you 🎀
Is this just printed on regular photo paper? How do you keep it safe from the resin?
You can put a couple layers of mod podge on both sides of the photo before putting it in your mold.
I noticed you posted this comment 3 months ago, but i at least hope this helped.
@@KazooKalesit does, thank you so much!
I want to get that but how
Beautiful work, where u buy these keychain handles?
Vishwas corner
Hola, como estas, como haces para que no se borre la foto con la resina epoxica?
Saludos desde Argentina 🇦🇷💋
🤔
How to make a hole to attach the keychain holder and is it compulsory that only silicon mould should be use
U can put hole using a hand driller will do a video very soon
Pic size paranjero
normal passport size photo edkkavo set cheyyan
According to mold size veneal edkam aa same material aan ivde edkunne
When you pour resin directly on the pic. Won't it get blur.
Do you get laminate the pics.
No use good quality waterproof print
Thank you for Sharing this, the Key Chains, are very Beautiful. 👍
Thankuu
Dix is nyc what are the material use for the resin arts
😮🎉🎉🎉🎉
Nc
How long does it take to dry .... especially first layer??
6-10 hrs
Great tips, super cute! ✨
🖤🖤
Paanuo gawin
Price mam ?
Hi
Resin keychain full video 💙✨ua-cam.com/video/uFvQMIFb43A/v-deo.html
For orders dm on Instagram
@sherin_laza
I want to contact you
Matiriyal jove che
Music name plz
How to fix Key ring
Sister can u make one for me
2 inch round mouldn ethra size photo venam ? plz reply
Just rough aayit oru paper cuteyth fix aavunundo nokya mathi and measure it's size
How do you attach the chain to it?
Hand drill use krke😊
അതില്ലാണ്ട് sett ആകാൻ patuo
Nice👍
❤️
Can i put like normal a4 sheet paper in resin?
No
How ca you make the hole in the inside of resin
Using handrill
Which resin 3:1 or 2:1 and curing time?!?
2:1 ( keep it for 10 - 20 hrs ) depending upon resin there may be changes ( it will written in that bottle itself)
Maasha allha nallnd❤
Thanku dea❣️
Nice
Thanku🎀✨
How can I get the materials for the resin artwork? I am interested but i don't know how to start. please can someone help me?
Amazon
Is that normal paper or special paper?
Glossy sheet
But how to recognise the size of each photo for printing 😢 plz reply..
4 cm for this mold
You can just measure the size of your mold and cut a piece of paper and put into it to know whether it's fits or not and measure it's sizes
Wow amazing how resin glu buy in the market
Flipkart
How do you dry your resins?
Just leave it epoxy resin dry within 15-24 hrs
How did you make the hole nad how did you dry it
Electric driller
How long should we wait before taking it out from the mould if we don't use UV
24 hrs it depends upon various resin you can read the instructions in the bottle
@@Sherin_laza ohk thanks
What quantity of that resin and harder
Doesn't say exact amount coz I have mixed little more for other works also you can mix it in a little amount and use the balance for any keychains or else
From where you byued this mould ?
Vishwas corner ( insta page)
Which photo u used laminate or other
No use glossy/any waterproof photo prints
How will u choose the size of the photo
Just take any paper and cut a size and put in the mold and measure it's size and print the photo accordingly
what is the size of the photo u used in it?
4 cm
2 inch moldil photo size enganeya
4 cm
From which shop I can buy the resin
Available in many Instagram pages
Vajra epoxy
Theartstore_resin_24
How to stop the floating of photo when making larger artwork?
Pour the first layer and dry it stick the photo into it using tacky tapes then pour another layer of resin above them
@@Sherin_laza Thank you for your reply 😊 I mostly use laminated photos as without them photo color bleed out so tacky tape is visible from the laminate portion .so is there any other way please share that mam
@@monicasambyalwait for your resin to thicken for 45 minutes to an hour before adding the photo, thicker resin makes it harder to float!
@@Pattycake85 Thank you 😊
Hi ....u made a resin art but there r no holes inside the molds, how u added keyring into this? Plz show it would be helpful Tia🎉
Using hand drill
will do a video soon
How do you get the key chain on?
Make hole using hand driller or electric driller and attach eyepin and add keychain ring
Do you laminate those photos?
No it's glossy photo print which is waterproof
Da product link undo rate enganeyanu resin meterialsinu
Hey upload video regarding resin material pls check itout
How did you attach the keychain
Put a hole through handrill and insert eyepin
Hu it's look better yaar
What was the sprit put on the photo?
Isopropyl spary to remove air bubbles
what paprdid you use for the picture
Glossy sheet
What did you spray on it?
Isopropyl spary
What is that spray? Plz tell
Isopropyl spary used to Remove air bubbles
How do you put in the key chain
Using handrill
Where you bought
this mold
Instagram store @vishwas corner
If you don’t seal the photo (laminate) over time the picture will fade
No it won't fade make sure you use quality photo
How did get to print picture of that size
Print it accordingly to ur needed size ¿
Did u mix the resin with harder or just d resin
You can't use resin only😅you have to mix it both ( if it's uv resin you can)
@@Sherin_laza okay thank you