ToughBuilt StackTech 2 in 1 Convertible Hand Truck Stacktech Hand Truck
Вставка
- Опубліковано 7 лип 2024
- ToughBuilt StackTech 2 in 1 Convertible Hand Truck Stacktech Hand Truck
Videos mentioned ( purchase links are below time stamps )
StackTech overview video • TOUGHBUILT StackTech T...
Which Lock & unLock comparison vs DeWalt / Milwaukee • TOUGHBUILT StackTech M...
StackTech Organizer comparison • ORGANIZERS Toughbuilt ...
2 in 1 convertible Hand Truck video • ToughBuilt StackTech 2...
Close Look at the 1 Drawer and comparison • TOUGHBUILT STACKTECH 1...
Toughbuilt 5 in 1 Utility Knife video • TOUGHBUILT 5 in 1 UTIL...
Time Stamps
00:00 Beginning, Intro, not sponsored message
01:28 What we are covering
02:12 Time Stamps
02:35 unBoxing, whats included, close look
09:11 information, model, price and more
10:48 Close Look continued and a few configurations
PLUS some questions we received answered
36:39 Detailed Step by Step Assembly
54:08 Subscribe to our channel, click our logo
Check out my New Channel about my Tesla Journey
/ @mytezlajourney1
@techmadeezy
#techmadeezy
@techmadeeasy1
@ToughBuilt
@TechMadeEzy
#toughbuilt
#toughbuiltstacktech
PRODUCT LINKS Below
Using our links supports our channel at no additional cost to you, thanks in advance.
39 pcs Magentic Nut Driver Set used in video
amzn.to/3V7i12E
DeWalt Magnetic Bit holder
amzn.to/4aaJtkp
Bungee Cords shown
amzn.to/48Mj1fK
Using our links supports our channel at no additional cost to you ( thank you )
NEED A LINK? post a comment and we will get back to you.
Affiliate Note:
Using our Amazon or EcoFlow Links supports our channel, we are an affiliate and this is one way we can buy products to review. We make a small commission at no cost to you as an affiliate. Thank you very much.
Try Amazon Prime free for 30 days
amzn.to/3rp84vu
Give the gift of Amazon to someone
amzn.to/36IU7jP
Students try Amazon Prime for 6 months
amzn.to/3pRgxXT
Say Hi !
Instagram: Techmadeezy
/ techmadeezy
Twitter: @TechMadeEasy1
/ techmadeeasy1
Facebook: TechMadeEasy1
/ techmadeeasy1
Email
techmadeezy@gmail.com
Check out my New Channel about my Tesla Journey
/ @mytezlajourney1
Intro Outro and other Music Credit:
Song: Two Face
Artist: Causmic
Other Music:
Song Meet & Fun!
Artist: Ofshane
Song: She No Dull Beat
Artist: Nana Kwabena
Song Meet & Fun!
Artist: Ofshane
Song Timpani Beat
Artist: Nana Kwabena
Disclaimer:
Due to factors beyond the control of Tech Made Easy I cannot guarantee against improper use or unauthorized modifications of this information. Tech Made Easy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Tech Made Easy recommends safe practices when working on machines and or with tools seen or implied in this video. Due to the factors beyond the control of Tech Made Easy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Tech Made Easy.
tme225
#techmadeezy
#tme225
@techmadeezy
toughbuilt hand truck
toughbuilt stacktech 2 in 1 covertible hand truck
stacktech hand truck
stacktech 2 in 1 hand truck
stacktech 2 in 1 convertible hand truck
TOUGHBUILT
TOUGHBUILT STACKTECH
stacktech rolling tool box
stacktech 3 drawer
stacktech compact tool box
stacktech large tool box
stacktech xl tool box
stack tech tool box
stacktech organizer
stacktech xl cooler
stacktech compact cooler
stacktech tool crate
stacktech drawer
stacktech wheel cart
stacktech convertible hand truck
stacktech advanced transporter
stacktech work surface
stacktech 4 drawer
stacktech 2 drawer
stacktech compact vacuum
stacktech hand truck
stacktech tower light
stacktech box fan
stacktech compact water cooler
stacktech area light
stacktech magnifying light
stacktech tumbler
stacktech cord wrap
stacktech 4 wheel cart
stacktech dolly
Clip tech
Cliptech
toughbuilt B70R
toughbuilt D70-3
toughbuilt A10
toughbuilt A30
toughbuilt 60C
toughbuilt B30
toughbuilt B50
toughbuilt C60-C
toughbuilt 030
toughbuilt C70
toughbuilt X50
toughbuilt T60
toughbuilt B70
toughbuilt T10
@TechMadeEzy
@ToughBuilt
#TOUGHBUILTSTACKTECH
#toughbuilt
tme225
#techmadeezy
#tme225
@techmadeezy - Навчання та стиль
I'm impressed.... Great review, I'm definitely switching over from Ridgid to StackTech. Some of my Ridgid boxes won't stay clipped in. The metal latch presses into plastic hooks, the hooks wore down, such a dumb design. Tough Built Looks awesome!!! I don't dig Milwaukee, Too much red.
Your voice sounds just like Howard Stern. Love your reviews on all of the stacktech products if they can manage to get and keep it in the stores I'm investing into it.
Thanks buddy
👍👍
Great video! I was thinking of switching over from packout because I love the color and the rails, however I live in the desert where there is a lot of dirt and rocks driving on unpaved roads I can foresee the locking mechanisms malfunctioning due to dirt and dust that would ultimately get in there. Wish packout would just sell us the black ones in the us
Yeah, this stuff looks sweet. I would buy everything but you can’t. It’s not a stock anywhere.
If you look hard enough and you drive far enough, you would be surprised. I wish you good luck.
Just an idea, but you could use a small magnet to tell what’s steel on the products. Thanks for the review!
Thanks
Nice review I still want this even though it won't do fit in cart mode on my trailer I made. It will fit if my machine in not on trailer. I made width of the trailer 3f 8inch.
Thanks 👍🏼
Amazing Video!... Thank you SO much for your time and dedication. The crack in the aluminium part and cast is NOT good. I think they need a little redesign of that bolt area and better quality control for all the products.
Not sure how that happened. It’s interesting if you watch the set up video the crack wasn’t there but all I did was put empty boxes on this thing, so I just don’t know how it cracked.
굿 좋네요 한국에도 좀 팔아야하는데 눈구경만하네
I could definitely use this , I've been waiting for them to come to Quebec , 😢 unfortunately i guess I'll have to stick with the older Bosch L boxx system , it's been okay , just wish I had more drawers options. Those tough built look pretty nice though. I wonder how it's going to hold up in our Canadian winter and jobsite conditions.
Probably an Ontario tool retailer is gonna get them soon from what I was told. They'll arrive this year for sure.
i was keeping en eye on this for a while. I didnt want to pull the trigger on red team yet. I am leaning towards tough build so far. You should return the cart. That crack is at a critical area.
Yup
This would be cool for my back up inverters and gear. Like the ego power station is heavy and having a set up would be nice
Hello! is it possible to open the drawer if a work surface is installed on top?
Yes definitely
nice
I saw your question I’m assuming if you take off the wheels it’ll fit but I don’t know why it would want to do that. At that point you can just buy the XL box. It’s the same without the wheels.
you have the bins for the bar in your organizers
Yup honestly didn’t realize but I do have a few thank you
Great! Now show a video showing how you take those annoying stickers from the boxes!
I hear you, I've done okay manually peeling them off slowly but I hear a hair dryer could help
What is the height in handtruck configuration with the 3 drawer attached? Would they fit under a tonneau cover in a truck bed while attached?
Remind me and I will check, poke me tomorrow late am
With only the 3 drawer box (or two of them side by side) it would fit under the cover on my F150 (retractable cover, not low profile), but the handle will not. You would have to slide it under in dolly configuration. The handle sticks up roughly 3½ feet in hand truck configuration.
It's just under 26" to the top of the drawer box
可惜現階段只有在美國販售，連ebay都還沒有看到販售，期待夏季新品上市，正在猶豫 ToughBuilt or Milwaukee
Same here
at 8:27 is that a massive crack in the forging of the bottom? thats not good.
Yup, not even sure how that happened. When I was assembling this it wasn’t an issue and I didn’t even get to use this other than moving it around and putting empty boxes on it so I’m gonna have to make a claim.
Does it fit in a truck bed? Like laying down or on its side? I have the milwaukee hand truck and it fits in the bed while turn on its side. Let's see a video of that!
Yes, You can lay it down in a truck bed
@TechMadeEzy I wanna see if if it fits in 4 wheel mode though with single drawer of tool box. I have a teanou cover on my bed and looking for solution to be able to just pull out my stuff rather than having to take it all apart and back together every time I take it in and out of the bed. F150 bed height is 21inches. Need to know the height of the hand truck with the single drawer or regular tool box still attached.
Ok good idea
It looks like the crack in the toe plate wasn’t there during the assembly part of the video. Did it get dropped hard or something?
It wasn't there during setup it's interesting because I didn't put any weight on this so I don't know how that happened but that concerns me I'm going to have to swap this out
Could just be a scratch in the powder coating that looks like a crack if it wasn't there during assembly. You should look at it super close to see if it's just scratched powder coat or an actual crack.
How does this compare to Cosco Convertible 4--in-1 hand truck that goes for $129.99 - $159.99 at Costco (usually on sale at $99.99)?
Don’t know Justin, have you seen or used that one?
This, of course, fits a tough built stack Tech toolboxes, which is an advantage
I’ve got one of those and I hate that the nose plate feels like it’s on a hair trigger; the nose plate may as well not have the ability to fold up, since it very easily unlocks and slams down. I’m thinking of replacing it with this TB handtruck since I’m accumulating Stacktech boxes (which I absolutely love).
Looks like the TB dolly is very similar to the Cosco 3 in 1 dolly. I've got the Cosco 3 in 1 dolly which is like the 4 in 1 but the foot doesn't fold up. It has been great in my applications of using it to transport Dewalt ToughSystem boxes, ladders and step platforms on job sites. It's been so handy for both rough terrain transport in its 2 wheel configuration as well as handy loading up a lot of stuff on it in 4 wheel configuration on concrete surfaces. Tough Built has got a winner with this dolly if your in the Tough Built platform imo. It is a bit pricey considering you can get the Cosco 3 in 1 for $99 often. But ofcourse the locking feature for the boxes is pretty neat imo If your willing to spend the $.
@justinssebanenya1329 I think your prices are for the Cosco 3 in 1 not the 4 in 1. The 4 in 1 is around $190 usually.
I have the 4 in 1 and it's great. I have no issues with the toe plate on mine as someone else posted. The best thing is you can use it at a 45* angle between dolly and hand truck. I don't use it a lot but when I need it it's awesome to have.
Where can I get this it's out of stock everywhere
The only way you’re gonna find it is if you just drive to many different Lowe’s stores check their stock and check their above stock even in certain isles. We actually had to drive to Florida to get this one. You can also go online and use different ZIP Codes on the Lowe’s website until you find one and then when you do, you’ll be able to set it up for pick up. They won’t offer delivery for some reason. good luck.
Where did you get this? They are sold out everywhere.
We found it in the store in North Carolina we ordered it for pickup the ones they told us it was ready we pretty much drove down from New Jersey
Latches stick in freezing weather
The castor wheels are small and solid, can't roll over much other than smooth hard surface. $269 is about $200 too much.
you own one?
@TechMadeEzy I'd guess not. It seems like it's solidly built, and the castor wheels look plenty big to me. I thought 269 was a little much at first, but upon reflection, if it can handle 400 pounds in hand truck mode and 800 in cart mode, it's a steal imo. The Milwaukee equivalent is only 40$ less and is a hand truck only. I'm pretty partial to Milwaukee, but this is obviously worth the price.
As you know, I’m just doing a review I’m not a construction guy. I’m not putting this through the test but definitely first impression putting this together using it for a few days with different configurations. I feel pretty good so far.
@TechMadeEzy Its a pretty good dolly even if its a little pricey. Its probably worth it since it has the box attachment system on it. Cosco makes a 3 in 1 that is very similar and they usually charge $169 for it but you can often get it for $99. I have one and have used it for several years with my Dewalt Toughsystem boxes and it works great. If I wasnt already heavily invested in the Dewalt system id probably get into the Tough Built system and get this dolly. It is a very versatile solution for transporting the box systems and so much more on all kinds of terrain in my experience. And the Tough built box system seems to be a winner.
The outside pockets on the tote look useless if you want to stack stuff beside it
One side yes
LOOKED LONG AND HARD THAT CRACK WAS NOT THERE IN YOUR ASSEMBLY VIDEO
Paul you are correct I went back to the set up video and everything looked fine, so this must’ve happened after putting it together. The weird part is we only had boxes on this unit. They weren’t even full. There was nothing inside of them. I’ll have to contact them and get a replacement.
I’ll stick with team red as much I was excited for this system! I’m just too far invested in the red system to switch, hoping they make something similar soon!
It isn’t like you can’t resell pack out to recoup some of the cost.
That metal casting wasn't quality controlled. Return it and get another one.
Definitely
Too heavy, assembly shows how poorly parts are made. Took a hammer to get the parts together.(the handle) Several of the welds had flux wire pieces still sticking out. I tried it on one job. Switched to the 4 wheel dolly, and the equipment back to my old hand trucks. Thx for the video.
Please use a tripod
Thank you for your feedback honestly in most cases it’s just not possible with the way we were review by the point of view. From time to time I do and I am aware that I tried to limit movement movement smooth so it doesn’t bother the viewer. I do appreciate your feedback.
I saw the crack did it get worse ?
No and ToughBuilt swapped it out for me it’s on its way
You cannot buy it anywhere.
I know it takes time but try to run around to different stores when you have time you might actually be surprised to see one sitting on the floor in stock
Lowes has a price tag on the shelf but no units yet. 🤨
@SD-jf7nb keep walking in the stores also keep checking Lowe's online with different zip codes
@@SD-jf7nb what was the price?
$269
46 lbs.? You sure?
Very
@@TechMadeEzy ok, you posted 10.8 kg? And that would be closer to 25 lbs.
@kellstat my mistake should be 20.8 kg thanks for catching that
Its a Lowes Product so I will not trust it. Lowes in Az. sells low-quality products that do not handle the extreme heat and sun out here.
No they don’t
It's not a Lowe's product but a product that Lowe's may carry. I've been using Tough Built tool punches for years now. Long before Lowe's ever started carrying TB. That being said, TB quality has noticeably slipped since I first started buying them. Cheaper manufacturing processes or materials one. Either way, they're not quite the Tough Built they built their reputation on.
You are right about Lowe's though. Stay away if at all possible.
I have first gen Milwaukee plastic boxes and they are still holding up. I will not purchase any product from Lowes due to many past purchases that proved sub standard quality from them.@@stritheor
Craftsman and Kobalt. Not TB
Lowes garden and wallpaper center doesn't sell quality stuff anywhere... Homeowners and apartment renters who fall for gimmicks are the customer base..
looks like you can not open the units on the handle side while in place since the handle will get in the way. The entire idea on any of these stacking systems is the ability to open lower units without unstacking. Poor design on Toughbuilt's part
You can, just got to unlock box above and tip back an inch to access center latch then drop box back down.
@@MONEYZ123Yep pretty easy actually. Its basically a non issue with how awesome the locking system is.
This entire system will NOT sell...
and yet...here you are...commenting and watching ANOTHER Stacktech video. 💀💀🤣🤣
@@MONEYZ123 Trying to bump your algorithm so you can make a lot more money... I watched a bunch of them trying to figure out how they can justify charging the same price as Packout for homeowner/apartment renter gimmick stuff.. .. The more I saw, the worse the design looked and the fake comments were kinda embarrassing.. You're welcome for the added activity..