Royal Enfield 350 Classic REborn. Fitting THE best Pannier frames EVER!
Вставка
- Опубліковано 13 лип 2024
- Review and tutorial of the Genuine Royal Enfield military inspired Pannier frames with the Hitchcock's motorcycles fitting kit.
Pannier frames for 350 classic Reborn. accessories.hitchcocksmotorcy...
PayPal Donations. threelittlefishes@live.co.uk
Patreon. / stuartfillingham
#350classicreborn
#royalenfield - Авто та транспорт
Thank you Stu for going the extra mile and perform tasks twice that we may benefit.
I tell you what Stuart, you’ve always been brilliant at reviewing stuff and this vid is no different! Great bit of kit and a great review! Well done!
I bought a set of pannier frames from India and they were rubbish and needed that much modification (bending and additional adapter plates) I decided to make my own out of 316L Stainless steel and have tie wrapped the Lomo large dry bags to it. 4500 miles and all is good. The time it takes and the cost of materials and Argon gas to make your own far exceeds these from Hitchcocks. Get them while you can I;d say.
Congratulations Stu. Being part Scottish I do not part with my money easily but, based on your recommendations I just ordered the worlds greatest pannier frames for my Classic 350 from Hitchcoks. I told the misses it’s for using the 350 to go for groceries. She approved. Now to review the luggage options.
Just completed a 2410 mile trip from Colorado Springs to Oshkosh WI on the Classic Signals Edition. I couldn't find the genuine Royal Enfield Pannier frames in stock anywhere so I fitted a cheaper pair and they performed flawlessly. Having said that, I will buy the genuine article when back in stock.
I wish I had a Classic 500 or 350 ! Old school cool.
I have always told new riders if you can't carry anything on your bike, you will never ride it.
Thanks for the great videos. 👍
Another outstanding video Stuart! Thank you so much for all the effort you put into each and every production. You never fail to get me laughing and, most importantly, you are my go-to source for info. on all Royal Enfield products and accessories, etc. It is through you that I was turned on to Hitchcocks, and I've dressed my 2021 Continental GT to the hilt with all of their bits and bobs as a result. Anyway, now I'm thinking of picking up a Classic 350, and I've been doing my homework on luggage options for the machine. Again, you've come to the rescue, and I have enjoyed your video detailing the mounting of this most excellent pannier rail system. Thanks to you mentioning the discontinuing of both the mounting rails and the bags, I'm now preparing to order a set of the rails from Hitchcocks, and I'm pressing them for more info. on the bags that they are designing. So.... thanks so much, once again, for keeping me well informed. I really appreciate it! One thing I have to ask.... I noticed (via your excellent close-ups) that the frame on your 350 seems to have some staining just under the seat. this comes across as a lite grey spotting, etc. I'm just wondering if you fell victim to something I noticed on my GT. I cannot go anywhere near my frame with any kind of denatured alcohol for the purpose of cleaning in preparation of putting a sticker on, or something to that effect. In MHO, the paintwork on my frame is not one of the GTs high points. Please forgive me if you've already addressed this kind of issue in one of your videos. In my experience with buying new bikes, I've always asked the dealer not to wash my bike B4 I take delivery. I'm picky about this because of the chemicals the dealers use, and the spots they leave behind when they do not dry the bikes properly. Maybe this is something you can help us out with in a future production, because folks may not take this into account. Anyway, thanks once again for all that you do. I look forward to each and every video that you release! Cheers my friend!
Thanks for your reviews Stuart, I’m a fairly recent subscriber and find your content interesting. I must say that the quality of your camera equipment is excellent and really makes a difference.
Sorry, watched video and got nothing, just left a comment. But I did enjoy watching you work and I felt like your manager drinking coffee. Did good! I will keep you another week. 😂
I have a hunter 350 and I purchased similar pannier frames and bags and this video helped with my install even though its a different bike so thanks for the video!!
Thanks for the video which answered some of my thoughts about installing those exact pannier brackets. 👍
Nicely done, really looking forward to to Friday.
Brilliant video as always Stuart and I agree, they truly are multi pannier carriers 😃👍🏻
Great video Stu , cracking bit of kit these and an easy installation and quite in keeping with the bike I think
I have these on my Classic 500. Everything you've said I agree with. These bags look great, are capacious, tough and waterproof. They stay put.
So these do fit the CLASSIC 500
Morning Stuart, great video, i wish these were available for other modern classics, simple but a very clever design...
ghee im early. Ive got myself a Classic 350 reborn in chrome too, so useful video. Might get myself a pair of these, but I'm also looking at peather panier bags that can be linked and placed underneath the pillion :)
Hopefully someone will make metal ammo-box style panniers to fit this type of rack. They would look good on any Bullet or Classic and would look fantastic on the Signals variant.
Bloody hell : good job I watched this again I had forgotten to tick, press, touch or smash the like thing. I can only say that I must have been overcome by these being the best pannier frames I have seen available since 1970.
Agreed with the Pannier Rack excellence as I bought a set three years ago for the 500 Classic that you seduced me into buying(and have never regretted) apart from the time I followed you down that track at the beginning of your video, 'The Road of Stones' and bust two spokes!
I can see where you could make a simple extension bracket for the top bolt that would allow the frame to be level.
I fitted the Hitchcocks pannier frames to my Signals 350 reborn classic a few days ago, I used a telescopic magnet to hold and relocated the awkward top suspension nut very easily for the bolt to engage the nut, sourcing the olive canvas panniers has proved impossible, As you mentioned Hitchcocks are developing some panniers that will be available in a few months they said. One of the rear stay brackets had a nut on that wasn’t welded flush, Hitchcocks sent a replacement the very next day, great service.
Came out great
Good video, thanks for sharing.
These frames do look the business - I like that they still look purposeful without the pannier bag in place, unlike those random hoop affairs offered with aftermarket panniers for the more ‘regular’ motorcycle. I can imagine heading off to IKEA with a few ratchet straps with these. Although, I would persevere with some diy bracketry to get the frames upright, if this is possible.
Stu I concur, these are the best side rails because the support (foot) at the bottom does not protrude too far unlike others which have a much larger foot. I have tried side rails without the foot and soft luggage just sags. I haven't tried yet but I think these might also fit the Meteor 🤔, with a slight modification😮
Stuart you're a wizard 🪄, I feel like I could get my spanners out and have a go...I've got the hunter...so I'd expect a similar amount of effort to a a pannier kit...❤ Take care out there 💞
great video and i agree completely with everything said. i originally bought a set of pannier frames and bags from india but they proved to be complete rubbish with nothing fitting and everything being such low quality that it all ended up in the bin! I subsequently bought a set of frames from hitchcocks and a pair of bags from an RE dealer here in Italy. The frames and bags fitted without any issues and are totally robust. My classic 350 is my only mode of transport so it has to be capable of carrying anything and the frames have proven to be ideal. One thing i would say about the bags is that the colour fades if they are left in strong sunlight… i bought the dark grey bags but after a few months they faded to a mid brown colour, i actually don’t mind and they still look good but its something you might like to consider and be prepared for… of course i live in Italy and my bike is parked outside all year round so i accept that this could be unique to me. i’m hoping that hitchcocks will come up with a rear rack kit to suit a single seat configuration, again i bought one from india and that too ended up in the cupboard of shame along with the pannier frames and bags.
Really struggling getting luggage for my Hunter 350. Thanks for your content
Nice video by the way
on getting a new bike the first thought is about panniers ... such motorcycle zen
Looks like a good basis for attaching home made panniers, tents, fuel containers, etc.
Looks good. Hate double d ring bags, they're a pain. Look forward to Fridays video. Went with the plastic ammo can looking panniers. Only right side made at that time, modified one mount to fit left side. Cut and rewelded the mount points. They work but hope I don't drop the bike.....plastic won't survive.
Great Stuart, but when will you give us a feature dealing with suitable rear racks and top boxes for the Interceptor & the Continental ?
I have been looking into these frames and panniers and can see that they can be bought from India fairly cheeply. However locking through reviews these aftermarket frames appear to be poorly constructed with minimum welds and frame stays that have to be bent to fit the bike.
Hitchcocks frames look quite expensive in comparison but in reality they will be much better all round and last alot longer.
Thank you for another very interesting and informative video, i look forward to seeing next Friday's video on the topic of panniers and fitment.
If it's any consolation I don't do much work outside on my vehicles these days either when it is raining. Been there done that and have the scars to prove it (and the aching joints).
Good video. I always fit a top box. I know it can ruin the lines of a bike, but if leaving my bike in town, I want the security.
I got my racks and bags. Genuine. From raju lax in India. Perfect fit and made for the bike. 👍Many are copies and frames Don.t fit properly. Classic 350
Good morning uncle Stu'. Ever since I was a teenager with my NSU Quickly, I have alway found saggy, wrinkly old bags to be rather unattractive. A friend of mine recently sold his RE Meteor 350 but, the buyer did not want the RE panniers, so, he kindly offered them to me for my Classic reborn. At first I was a little hesitant so I stuffed them under the bed for a couple of weeks while I had a think about it. Being a bit frugal (tight), I didn't want to splash out on a set of pannier rails and considered trying to make my own. It was while offering up various off cuts of Dexion, I realised there were plenty of anchorage points already fitted to the bike so, I put them on using nothing more than the straps attached to the bags and, surprisingly, they proved to be very secure but, they were wrinkly and sagged. Then I had a brainwave. In my shed stood a long since discarded vegetable rack, the baskets of which were an almost perfect fit with which to line the interiors of the bags. Lopping off 2cm from the hight and snipping out one end to allow access from above, I slid them in and, hay presto, no wrinkles and added rigidity. They look great, sit closer to the frame and survived my road test (down a rather bumpy lane) with three one and a half litre bottles filled to the brim in each bag. I couldn't be happier with the result and saved a few quid into the bargain.
Ayyyyyy-Up Stuart, these carriers look like they should be the industry standard, I think with a little ingenuity you could carry half the contents of your shed, in India they probably do.
When you think of all the faffing about over the years with the feeble and over complicated European stuff that only fit one type of luggage, these and classic 350 are breath of fresh air.
Good work Stuart.
Merci uncle Stu, ça va dépanner un paquet de motards en classic 350.
i do love how the pannier racks look like they beg to have some jerry cans strapped on
Seems like RE have shot themselves in the foot by discontinuing the military style bags for the classic reborn? WHY?
back in the day I baught a second hand1955 150cc james cadet it had panniers very similar
Stuart, thanks for great videos on the panniers and pannier rack. Very helpfull. Based on these video i decided to go for these racks. As mentioned by you they are still out of stock at Hitchcocks. I decided that i will try to make my own bracket. Can you share the dimension of the washer (mounted with the shocks) and the dimension of the brackets?
Calassic good clour 🎉🎉🎉
Thanks for the video! I fitted it on my Classic 350 as well, I noticed that the rack on the exhaust side is really close to the frame, whereas on the other side, there is a bigger gap, is it the same on your bike? Cheers
I like the racks of the classic, but i dont like the RE original bags. sure they were cheap and look cool but my "waterproof" stormflaps were damaged and gone in the first few days. and i really dont like the D ring straps. i am now looking to adapt it to SW motech quick release without losing the possibility for non quick lock bags
Love your videos. I bought the RE Classic 350 in red a few months ago. It's the 5th RE I've bought. Currently, I have this new 350 and a 2008 Bullet.
I love my 2008, but overall, it's finicky. Doesn't always want to start. This new 350 is wonderful. It feels closer to size as the 08 RE, but the reliability is there.
The 2018 500s I had felt substantially larger to me, so I'm way more comfortable on the 350. It's a fantastic and beautiful bike.
Do they have frames for Triumph Bobbers. I am looking for something better so I can run larger bags. Thanks for helping us find new awesome gear
Hi, is the screw long enough to install the bag holder on the left side? because since there was a saddle, a handle and also a bag holder, I had doubts.
Hello Sir myself Paresh speaking from India.
Sir I want to tell you that I also have the s ame model Halcyon Black Royal Enfield 350 Classic Ribbon Thank you so much for this video🙏
I am surprised that RE have not made a kit for the new 350, Indian riders seem to carry all sorts of stuff on their bikes.
Morning Stuart ,great set of rails that actually support the bags instead of the usual saggy set up with throw over bags, I'm awaiting delivery of a sump guard at the moment, then these will be my next accessory , thanks for another great practical video, cheers 🍻
Got the very same set up on my 350, the black faded to pale grey over last summer, still use them every day though, good for putting the shopping in etc. Why on earth has RE stopped making these though?
I really like the Royal Enfield racks, but not having them available I installed standard pannier frames, without the foot, on my 2007 Honda Shadow. I then used a couple of Rok Straps to strap my tent to one side and my ultralight camp chair to the other side. Not elegant, but very cost effective, and adaptable. Over 16,000 kilometers later no problems. Warning… unlike Stuart I’m very much a dirtbag, so take my advice with caution.
Nothing wrong with Rok straps!
Would these panniers & installation kit fit on a Meteor 350?
Got the chrome red version ,khalh a nuam ania aw
Morning Stu 👍.
Another excellent "how to" and review.
It might be worth checking if the star washer on the adaptor plate bolt should go behind the nut on the reverse side? I could be wrong in this instance, but usually any anti-loosening washer (spring, star etc) is usually fitted immediately behind the nut?
Looking forward to Friday's installment very much 👍
You are correct, But.... I dont like the idea of a star washer pressing against a painted framework, Quickest route to corrosion issues.
@@stuartfillingham Fair point. Good "tweak" then.
Ideally I'd substitute it for a nylock nut - but they're quite deep. 👍
@@PhilipBallGarry Yeah Ill get around to it Gary just couldnt find my box of nuts and bolts!
@@stuartfillingham We use a lot of "bent beam" nuts at work. Looks like a normal nut but the final couple of threads are squashed. Where specified on drawings we treat them as single use like a nylock. But they're reusable for our home applications 😁
Some frame, that!
How many litres are those Lomo pannier/saddle bags? Thank you
What to do for the Meteor 350?
ciao, per installare il portaborse sul lato sinistro la vite è lunga abbastanza? perchè essendoci il sellino, la maniglia e anche il portaborsa mi era venuto il dubbio.
Ey up, ❤. If ever i happen to recognise you iin a pub, you can expect me to stay sitll and say nowt. And when im sure ill order misen another pint.
Nice over view and im sure they are super .
Its a lovely set of panniers and rails but way beyond my budget so I have to go for a cheaper set or not have any
£100 for pannier frames is too much? they are one of the cheapest around! The bags as I said are no longer available.
@@stuartfillingham 97 quid will buy two frames with panniers so they are definitely not the cheapest and looking at the close ups the welding is just as poor as all the rest.
@@Lee-70ish 97 quid for bags and rails by whom and from where?
@@themechanic2036 yes I would quite like the answer to this one. Been running this channel for 6 years and have been approached by just about every luggage manufacturer out there to review their gear but, have never seen anything worth having at that price. Actually I will rephrase that, ive never seen anything at that price. would be interested to review it, if it exists!
@@Lee-70ish as poor as all the rest of what?
Great video, as always. Can I please give you a bit of advice. I was in the fastening business for nearly 30 years. On one of your fittings you placed the serrated washer under the socket cap screw, that type of washer is designed to go under the nut as it acts as a lock washer, the what you have done the nut may well come undone.
Yes ive explained this elsewhere first thing this morning. serrated washer damage paint work so I never place them against a painted surface. They are the reason god created locking nuts!
@@stuartfillinghamHave you the bible reference for that ?
Will these fit a Classic 500??
Xin chào Stuart, I am Tommy from Vietnam. I am owning a classic 350 just like you. However, In my country this kind of side Pannier Rack is not accessible yet. Is it possible that I can ask you for a detail Spec of this so I can order a handmade one from our local shop?
Is a shame these are not available
from Hitchcocks any more.
is pillion comfortable with those
Just bought myself a Classic, but while the military style pannier bags are available, the frames have been out of stock for weeks, with no indication as to when they'll be in. Poor planning by Hitchcocks, as many commenters on other vids are well hacked off. Looks like the Ebay lotto is the only choice.....wish me luck!
Это самый красивый мотоцикл!
I have a pair of racks I bought for my 500 bullet that I never used. They are different to the ones you have in the top and bottom mounts. So the kit won’t work for me.
About this Kit for Triumph T120? It is available?
id like these as well for my T100 Bonneville..
Good old Hitchcock's.
Definitely worth buying genuine and not ebay crap
Shame there is no options for the trials version
Sir why you not use legguard why saddle stay 😮
I'm not one to complain, but the anti shake washer you fitted at the bottom mounting, shouldn't that have been under the nut? That's where you would normally fit one.
I'd use easy release lock tight as well, as we know REs do vibrate a bit, just to be belt and braces!!
LOL also not one for checking comments before commenting! already dealt with this first thing this morning!
@stuartfillingham I do hate to criticise your work, it takes ages to film even short videos, different angles ect. I have two days a week where I get up slightly earlier Wednesday and Friday, to watch your content and I get the bonus of your videos and those of AAR ON AIR. Both of you have interesting subjects and sensible adult content, however he never touches on the bad government issues you do.
Keep up the great work.
It is impossible to order this kit from Russia. What a stupid time we live in! I will order another kit from India in this case.
Unfortunately Hitchcock Motorcycles aren't stocking these now. UFN. Very annoying!
Your calassic 350 v va lean full gllow your bike cleaning purses sher clening pursas
Nice frames, but the bags ,,,,!!😢