I don't care how much better a person thinks a certain brand is. Fact is that new holland is a solid machine. I own a 2015 or 2016 L230 with 1600hrs., and it is a very capable 90hp machine. I would love a 110-120hp track machine with high flow and rear remotes. I operated a nice asv the largest they make and it was an animal, I was using a huge 90" light material bucket to load top soil on dump trucks. That machine would push the whole pile ahead of it like a large pay loader does it was 🤪 crazy!!! Thanks for the video.
Probably a stupid question but here goes. Why do most people load them backwards? I did concrete construction for a few years and we never loaded it backwards, and it towed just fine.
Never a stupid question. It's just operator preference. I load them both ways but it is safer driving them off forward then backwards. When I have my mulcher on I drive them on forwards.
Two fork lift/airplane solid mini front tires u can raise or lower mostly to turn on to save wear on track/belts needed esp smaller models where hving tiny shorter track/belt no big deal.If u r trying to reverse 1 way & drive other way tires down helpful not able to move or if stuck 2nd option, same idea driving both forward belt & tires or not using belt or tire as needed.
Never had a problem with the tracks. Radiator clogs from the inside And it’s a pain to have to clean it take everything apart you just can’t use the power washer and use it hast to come apart
I have seen it several times a track will look perfectly fine but will have a broken cable inside or is stretched on one side then they are prone to slipping off is it the same side every time?
Making your prts A deer or B say new holland both bolt on idea bc cheaper by dozen & 2hooks beats 1 hook, example diff touch here or there worked in, better polish nut or bolt. U can deer tier 1 or deer tier 2 prts fit day or longer way or stay upgrade or just fixed put back on.
237 and 337 basically same machine with different joysticks and touch screen, still has worst visibility to the bucket. Lift arms to close to cab door, rough ride , noisy cab . Terrible joystick controls when multitasking. Way behind bobcat and cat . Machine is built by case
why not make plates /weight chrome clang/drop weights too hard some times like at gym. A thin stack of plate weight pulley cable controlled is the way to go. GOD bc all ready proven system. Works well hving weight pulley lowered below grade in a hole u dug just so or raised or easily lifted off & set aside no counter weights needed job. If u can lower weight down 4ft into a whole or up high off ground tight space u get best weight vs no weight set uo off all. if the weight plates stick out 2ft or 3ft out the back u see why no weight option might be nice as well. Keep them thin so 2 guys can lift 150 or so lb weight plate idea or less.
seems Italy was devil fascist them farming buss came along like Catholic religion new player took over inside out retelling so not just whistling dicey, seems retell b4 I spit balled it out there good fit, working/hand shacking across pond.
looks /smell tv vistion like Deer/jesus corp might hve 2 buy up weaker hand player out right if any thing there at All or just manufacture plant for smaller models cheaper than building new & killing off every person at table+ dealer swallowing best prt shot.
I don't care how much better a person thinks a certain brand is. Fact is that new holland is a solid machine. I own a 2015 or 2016 L230 with 1600hrs., and it is a very capable 90hp machine. I would love a 110-120hp track machine with high flow and rear remotes. I operated a nice asv the largest they make and it was an animal, I was using a huge 90" light material bucket to load top soil on dump trucks. That machine would push the whole pile ahead of it like a large pay loader does it was 🤪 crazy!!! Thanks for the video.
Thanks for watching and commenting.
Great video comparing the two!
@@radiob8665 thanks
Probably a stupid question but here goes. Why do most people load them backwards? I did concrete construction for a few years and we never loaded it backwards, and it towed just fine.
Never a stupid question. It's just operator preference. I load them both ways but it is safer driving them off forward then backwards. When I have my mulcher on I drive them on forwards.
So now the new C300 series have 4 levels of sensitivity on the EH controls, you will enjoy that.
It is an amazing machine! I love it.
Great review of the 327 !
Thanks I love it
Ladies and gentlemen I bring a offer to the table
Thanks for watching.
Two fork lift/airplane solid mini front tires u can raise or lower mostly to turn on to save wear on track/belts needed esp smaller models where hving tiny shorter track/belt no big deal.If u r trying to reverse 1 way & drive other way tires down helpful not able to move or if stuck 2nd option, same idea driving both forward belt & tires or not using belt or tire as needed.
Thanks for watching.
Never had a problem with the tracks. Radiator clogs from the inside And it’s a pain to have to clean it take everything apart you just can’t use the power washer and use it hast to come apart
Is the fan reversed? Never had that problem even when sweeping the warehouse... The dustiest job around.
have you had any trouble with losing your tracks on concrete or paved surfaces?
Zero issue with that but I always maintain track tension.
@@wildcatwilly so do I but have had a lot of trouble losing tracks on a hard surface.
I have seen it several times a track will look perfectly fine but will have a broken cable inside or is stretched on one side then they are prone to slipping off is it the same side every time?
Never had any problems losing the tracks
Making your prts A deer or B say new holland both bolt on idea bc cheaper by dozen & 2hooks beats 1 hook, example diff touch here or there worked in, better polish nut or bolt. U can deer tier 1 or deer tier 2 prts fit day or longer way or stay upgrade or just fixed put back on.
I prefer cabbage
Nice machine
Thanks for watching.
How did it go? 2 yr review?
She's doing fantastic still have it and going strong.
@@wildcatwilly thanks 👍👍, looking at the 338 here in Australia, they are made by case? They look the same 👍
BUY A CAT, BOBCAT, or an ASV way more features for the same price with better reliability and performance
It all depends on what dealer is close to you there aren't any of those close to me.
Bobcat aren’t what the used to be.
New Holland use to be good. Their L170-L190 line during the mid to late 2000s were far better.
Those were solid rigs
237 and 337 basically same machine with different joysticks and touch screen, still has worst visibility to the bucket. Lift arms to close to cab door, rough ride , noisy cab . Terrible joystick controls when multitasking. Way behind bobcat and cat . Machine is built by case
Cool
Did I just become dyslexic or are these comments a bunch of gibberish?
Ya if you decipher them please let me know... Haha
why not make plates /weight chrome clang/drop weights too hard some times like at gym. A thin stack of plate weight pulley cable controlled is the way to go. GOD bc all ready proven system. Works well hving weight pulley lowered below grade in a hole u dug just so or raised or easily lifted off & set aside no counter weights needed job. If u can lower weight down 4ft into a whole or up high off ground tight space u get best weight vs no weight set uo off all. if the weight plates stick out 2ft or 3ft out the back u see why no weight option might be nice as well. Keep them thin so 2 guys can lift 150 or so lb weight plate idea or less.
What?
I hve never seen or used or watch new holland equipment just speaking out load.
seems Italy was devil fascist them farming buss came along like Catholic religion new player took over inside out retelling so not just whistling dicey, seems retell b4 I spit balled it out there good fit, working/hand shacking across pond.
Thanks for watching
americans might like i ways but want to hve them in tuscany w/new body & bank as well.
Thanks for watching and commenting.
If both solid tires battery powered 2nd way to out run alligator help way & power.
?
cheaper prts a factor to deer new soul new heart prts example. GOD
Thanks for watching
looks /smell tv vistion like Deer/jesus corp might hve 2 buy up weaker hand player out right if any thing there at All or just manufacture plant for smaller models cheaper than building new & killing off every person at table+ dealer swallowing best prt shot.
What????
C232 I have is junk
That's too bad maybe trade her off.
@@wildcatwilly want to get jcb teleskid
I would love one as well however I have a JCB mini X in the shop right now very frustrating having to wait for parts to come from England.