In my opinion the flocking would look smarter than gloss black for the interior and it’ll look more modern. Then you wouldn’t have to mess about with sanding the flocking off. Loving the content 👍🏼
thanks man appreciate the comment and i recon i agree. everyone does the gloss black inside now as all new cars have it so doing more things by ModsnFlocks in the same flock would be different
@@DriveWithAndy hi I’d keep the flock maybe tie in some carbon fibre accents or hybrid carbon ur theme is gold in place maybe carbon with gold strands possibility’s are endless gloss black been done to many time plus over time can scratch loses it’s shine luster but end of day it’s ur car and how you express urself with modified cars everyone one shares same passion keep up great work on channel look forward to next vid 👍🏻👍🏻👍🏻👍🏻
It looks so much better as the large compartment is too big, not it's a nice rectangle for your phone. As mentioned ModsnFlocks can do painted in colours or flocked like mine
@@DriveWithAndy I do prefer plastic over flocked though cause i spill coffee all the time over there. Im not sure if they ship stuff in Greece but i will give it a try, this double cup holder is great for a daily driver. Thanks again for the info, and I must say you have taste in these simple mods, dont look over the top ricer mods.
@@neurontechno thanks 😁 I am trying to make the inside a nice place to be, needs more work as mentioned. May stick to flock as it's different. Also I wownt really use the cup holders anyway haha.
Mate good job once again . Car is looking great fam . For the door panels , I’d say don’t do the leather on the upper part simply cause of resting you arm there and the sun exposure otherwise the other ideas for the doors are mad . Keep the flocking on the centre console , no gloss black , ruins the OEM+ look you tryna achieve
Thanks 😊 Ah really I didn't think the leather would damage by the sun. But I guess that does make sense. Although if protected it should stay decent. Yeh going to stick with more flocking with the alcantara and some leather. Gloss black has been done so much
Looks like a factory option due to the switch’s being installed where it’s located, looks fantastic Andy! I would love to do it to my st150 but my st150 is a track car but if I get another one I would do it but I’m not good at wiring for heat seats😂
Thanks Chris ☺️👍 yeh I have now decided not to go down the gloss black route as everyone does that so will get the company to do more flocked parts to give the same finish through out the interior. Along with the leather and alcantara it should be a nice place to sit. They make great track cars, be cool to see pics of yours
@@DriveWithAndy No problem Andy! Yes that’s correct mate and I’ll suggest go down a different route like you said as it’s best to be different. Yes leather and alcantra will be perfect together. Yeah they’re great for track especially if there is more power involved😂 I’ll have to bring it out the garage once it’s dry and get pics of it as it’s only legal for tracks but I can get it road legal
@@DriveWithAndy sounds great I’ll give that a watch now👍🏽just bought new bumpers for mine want to get it looking as good as I can but moneys always a problem hahaha
@@swiftyrs2354 yeh thinking to flock the handbrake surround, guess the larger connecting part may be cool in the same flock. But still want the leather and alcantara door bits
They are £70 for the spec I had mine done in. You can go for painted. I am wondering if to go gloss black on this and the handbrake surround? Just not sure if to keep to the flock or go gloss black
@@willmesser6340 I do love the flock as has a material style finish than the hard plastic. But gloss black always looks nice. Not sure what to do with the other parts of the interiour
I have considered that. Only issue is the buttons and radio surround will still be grey plastic. So do you think the flock should stay and not go down the gloss black route?
@@DriveWithAndy mines just a 07 fiesta zetec.. bought it last week, was wondering if st seats would fit when I searched it up it said my fiesta was a mk5
Sorry no links as custom made. But no joke if you are interested I am happy to sell them to you, door pulls, hand brake surround and the panel it links to with the grills vent holes?
This is a really good series, giving me loads of inspiration for my fiesta project. Car looks epic Andy. 👍👍
Thanks Stefan 😁👍
In my opinion the flocking would look smarter than gloss black for the interior and it’ll look more modern. Then you wouldn’t have to mess about with sanding the flocking off. Loving the content 👍🏼
thanks man appreciate the comment and i recon i agree. everyone does the gloss black inside now as all new cars have it so doing more things by ModsnFlocks in the same flock would be different
Just bought myself a mk6 ST, perfect channel for me
That's awesome man, such a great car and welcome to the channel and a community full of us Mk6 Fiesta's 😁
a video about the headliner would be interesting (turning it black)
Looking good Andy!
Whay thanks man, first comment 😁👍👍
👍🏻👍🏻👍🏻 looking great more classy
Thanks. So do you think keep with the flock and not go gloss black?
@@DriveWithAndy hi I’d keep the flock maybe tie in some carbon fibre accents or hybrid carbon ur theme is gold in place maybe carbon with gold strands possibility’s are endless gloss black been done to many time plus over time can scratch loses it’s shine luster but end of day it’s ur car and how you express urself with modified cars everyone one shares same passion keep up great work on channel look forward to next vid 👍🏻👍🏻👍🏻👍🏻
I must say, this double cup holder gear trim is priceless, I need this in my life. Door cupholders on mk6 are useless
It looks so much better as the large compartment is too big, not it's a nice rectangle for your phone. As mentioned ModsnFlocks can do painted in colours or flocked like mine
@@DriveWithAndy I do prefer plastic over flocked though cause i spill coffee all the time over there. Im not sure if they ship stuff in Greece but i will give it a try, this double cup holder is great for a daily driver. Thanks again for the info, and I must say you have taste in these simple mods, dont look over the top ricer mods.
@@neurontechno thanks 😁 I am trying to make the inside a nice place to be, needs more work as mentioned. May stick to flock as it's different. Also I wownt really use the cup holders anyway haha.
@@DriveWithAndy how much did you pay for the trim if you don't mind me asking?
@@neurontechno my spec was £70 but I assume different finishes and if you want USB or cigarette lighter etc will make a difference
Looks very nice you should get a new gear shifter to match a little more
Yeh do you mean the top bit? I am looking to get it made in alcantar with gold stitching from the same company who did the gaitors
@@DriveWithAndy yes mate it will look well smart then
flock>gloss black. flock doesnt get scratched
Yeh I think I will do down the flock route with leather and alcantara
seriously good series man
Thanks 👍 appreciate the comment
Mate good job once again . Car is looking great fam . For the door panels , I’d say don’t do the leather on the upper part simply cause of resting you arm there and the sun exposure otherwise the other ideas for the doors are mad . Keep the flocking on the centre console , no gloss black , ruins the OEM+ look you tryna achieve
Thanks 😊
Ah really I didn't think the leather would damage by the sun. But I guess that does make sense. Although if protected it should stay decent.
Yeh going to stick with more flocking with the alcantara and some leather. Gloss black has been done so much
Looks like a factory option due to the switch’s being installed where it’s located, looks fantastic Andy! I would love to do it to my st150 but my st150 is a track car but if I get another one I would do it but I’m not good at wiring for heat seats😂
Thanks Chris ☺️👍 yeh I have now decided not to go down the gloss black route as everyone does that so will get the company to do more flocked parts to give the same finish through out the interior. Along with the leather and alcantara it should be a nice place to sit.
They make great track cars, be cool to see pics of yours
@@DriveWithAndy No problem Andy! Yes that’s correct mate and I’ll suggest go down a different route like you said as it’s best to be different. Yes leather and alcantra will be perfect together.
Yeah they’re great for track especially if there is more power involved😂 I’ll have to bring it out the garage once it’s dry and get pics of it as it’s only legal for tracks but I can get it road legal
Think the gloss black would look good but not on the centre console maybe try like a satin black on the door part?
hey. Where did you buy this gear knob with the material? do you have a link? I like it very much😊
contact Kolour Koncept on Instagram or Facebook. i highly recomend :)
hi, tell me where did you buy the center console with two cup holders?
Unsure if you say it in the video, but where do you get the double cup holder from? Can I have a link?
It's from ModsnFlocks and should be a link in the description
@@DriveWithAndy thankyou very much didn’t realize it was in the video must of missed it !!
@@owenlowry7 it's ok, I don't usually watch every sec of videos so can be missed 👍
Got some more bits coming which I've mentioned in my latest video
@@DriveWithAndy sounds great I’ll give that a watch now👍🏽just bought new bumpers for mine want to get it looking as good as I can but moneys always a problem hahaha
Where to find control for AC? Strenght, cool/warm and directions. It's look awesome bro!
It's from the same company ModsnFlocks. I have a video on the whole LED upgrade from them
@@DriveWithAndy Can you link to this video?
@@igorbjelicic4807 sure this is the LED upgrade. The company was RookieMods but now called ModsnFlocks
ua-cam.com/video/-oDIAo_cH9c/v-deo.html
Andy I heard at 9.20 does that aftermarket headunit make a squealing noise when playing music or just in general?
Can't hear anything at 9:20? But doesn't seem to make any noise
9:24 just as you turn the battery on and then press mute on the hesdunit
@@ajayxo6712 ohhh haha I think that's a half second of me laugh as I edited out me laughing as when I turned on the radio is was on really loud 🤣
Flock all the plastics ...did the complete interior In my rs turbo ...
@@swiftyrs2354 yeh thinking to flock the handbrake surround, guess the larger connecting part may be cool in the same flock. But still want the leather and alcantara door bits
The dual cup holders looks so much better 👌 how much was it if you don’t mind asking?
They are £70 for the spec I had mine done in. You can go for painted. I am wondering if to go gloss black on this and the handbrake surround? Just not sure if to keep to the flock or go gloss black
@@DriveWithAndy think the flock looks good!
@@willmesser6340 I do love the flock as has a material style finish than the hard plastic. But gloss black always looks nice. Not sure what to do with the other parts of the interiour
Where did you get the flocking and what glue did you use thanks
It was made by Modsnflocks. Check the description for links 😊👍
Black gloss the stereo shroud
u could flock the centre console mate
I have considered that. Only issue is the buttons and radio surround will still be grey plastic. So do you think the flock should stay and not go down the gloss black route?
Anywhere you can buy there center piece?
its something you have to get made. mine was made by someone who longer makes them
Do all these mods be compatible with the normal fiesta mk5?
Most mods I've done, looks wise can be used for the standard version, mine is a 2006 and call it the Mk6 Fiesta
@@DriveWithAndy mines just a 07 fiesta zetec.. bought it last week, was wondering if st seats would fit when I searched it up it said my fiesta was a mk5
@@liverpoolsaudits some countries do name it a mk5. If it is a 2007 then it's the same shape as mine.
@@DriveWithAndy it is the same, same exterior and interior apart from yours is a ST and mine is just a zetec
I’m gonna buy some mk6 ST seats and pray they fit tbh 😂😂
Link for this item?
Sorry no links as custom made.
But no joke if you are interested I am happy to sell them to you, door pulls, hand brake surround and the panel it links to with the grills vent holes?
@@DriveWithAndy ok, how many cost?
@@bikerslife668 would it be posted in the UK?
@@DriveWithAndy no,Grecce
@@bikerslife668 it may cost a lot to post to Greece 😞