Good day. Can you advise. There is a tablet with freerider hardware that previously worked differently. Now they gave me betafpv lite radio 3 and I can't see either the tablet or the simulator on the laptop. Can you give me some advice. I will be grateful
Hi, im having really bad issues with the radio, i been trying to upgrade the firmware but i can get the radio to set up mode. Do you know what can be happening?
Hi I'm trying to find the other video you mention when you are binding the radio and you mentioned if you are having problems binding because the sticks are in the wrong position and that you made another video on it? I can't seem to get this to bind with my x knight 360. The receiver is correctly in binding mode and the lite radio is set to lbt mode which it should be..
It seems there is now an ELRS V3 update. However, still a candidate. So do it at your own risk. But this shows that a stable ELRS V3 will definitely be possible or perhaps already is... BETAFPV would have had to do that no matter how if they wanted to keep their remote compatible with new products...
Oh mine binds, but the drone is just flipping around and rolling around in beta flight and also when I move the throttle it’s glitchy all the controls are glitchy and freaking out so I went back to my Boxer remote. Just trying to have another little remote, I can use in my car when I’m working not having to bring the radiomaster out
@@Datfpvhmm. I did this and still like when I have the throttle all the way down. It’s about an eighth of the up still and when I move the throttle up just a little bit it goes full throttle that’s it. Everything is just basically two steps instead of being fluid. So back in the box. Lol 🤦♂️
Awesome rundown thanks! Do you know how to set a certain switch (SA) as arm/disarm in the configurator? Or is that a Betaflight thing? I am brand new to FPV and just received my TinyHawk 2 Freestyle and trying to get it set up with my BetaFPV LiteRadio 3
I bought a cetus x fpv kit and it came with the light radio 3. I now have bought the meteor 65 and I cant get it to bind with the radio. Do I need to unbind the cetus x??
think the 3 is a winner to be honest, better switches and the size is good, built in battery and external module bay - and the lanyard attachement ring - now thats a winner by itself!
I purchased mobula 7 elrs version, I bought the beta light 3 rc . It worked fine at first in sim but now right roll joystick doesn’t respond at all and as soon as I start sim it spirals out of control without any input . Besides that issue I never got it to pair with the mobula .. it just never paired I understood instructions . 1 red blink = elrs version when I press bind blinks for 3 seconds then stops , it never binds . There is no bind button on mobula 7 1s HD .. when connecting mobula 7 to my pc . Pc never recognizes it’s connected , neither can I connect mobula to beta flight .. I’m so aggravated my vacation is almost over and I never got this pos to work .. thinking of returning everything and giving up trying to fpv.
Im having trouble with mine: I got it to use with simulators to learn to fly before investing in some actual drones as I was using a game joystick but it wasnt great. It initially connected to the configurator and worked fine for the first few times when I connected it in USB mode to Velocidrone but has now seemingly given up the ghost. If I connect to configurator, it works fine and all the sticks respond. I have factory reset it to be sure but when in USB mode, I get absolutely no response moving the sticks, despite it being listed under USB devices and its recognised in utilities such as "Joystick Show" If anyone can offer some pointers, it would be greatly appreciated!
Like for the video. And good luck dude if you're still alive! Tell me how this equipment is detected when connecting to the configurator in the Device Manager of the control panel. Or is it just a joystick, well, certainly not a com port. I just don’t want to connect to the configurator.
Hello friend, all right, congratulations for the channel and the videos, I'm sending you this message because you do it very well, you could ask me a question, I would like to buy the Hapymodel Larva X drone, but there are 3 models, FRSKY D8 BNF / FLYSKY BNF / DS M2X BNF , I don't know which one to buy, I'm also seeing the control, I don't know if the Betafpv 2 SE or the Radiomaster T8 works with this drone, if bindan, if you can help me I appreciate it,
Hey Dazz, I've been trying to figure out a relatively inexpensive radio to fly my Eachine E010S micro with. I have a Tango 2 that I fly the Rekon 3 that I got from you and my other quad that I lost, but I don't have anything to fly the Eachine with. I was going to try to put a Crossfire Nano on the E010S, so I could use my Tango 2, but TBS said it probably couldn't be done. Now that I know about the Beta FPV LiteRadio 3, I might just give it a shot. Thanks for another very informative video. see ya in the next one.
I bought a literadio3 remote from this company. and they sent me a broken remote. The control d8 channel is not working. I sent an e-mail for 3 months. they did not give a positive return in any way and they made me suffer. Absolutely do not buy products from this company.
I hit road blocks every were I go. download will not find the updated firmware and manual download it does not load. flash this flash that,. 3 software and drivers and scripts I have a desk top of crap just for these stupid drones!! Ive been at this over a week maybe 2 weeks and it wont bind. It has to be the transmitter but i can only flash it with version 1 something. sometimes it sees the port sometimes it does not but Windows always sees it. gripe moan piss and complain well its not important its just a toy to me.
![☀ Аппа с ELRS для НОВИЧКОВ! А заменит ли она TBS TANGO? [Betafpv LiteRadio 3 ELRS]](http://i.ytimg.com/vi/JUWJps5ToCY/mqdefault.jpg)
![☀ Аппа с ELRS для НОВИЧКОВ! А заменит ли она TBS TANGO? [Betafpv LiteRadio 3 ELRS]](/img/tr.png)
I was able to bind but nothing is happening when opening betaflight receiver tab. Shows nothing is happening
Thanks for the Vid and the help. I try Out now my new Radio and Whoop 😁 Happy Weekend ✌️
Any idea why when I to to use the comfigurator and click connect to rc it says hid device not connected?
How do you bind this controller with elrs to the flywoo firefly 1s nano baby with elrs. Having trouble
how to set like on 5 inch drone??
Will this bind to a emax hawk pro? That has a frsky d8.
yes if it has that receiver in it - range might not be the best though...
@@Datfpv that’s ok. I’ll upgrade along the way. Thanks!
Good day.
Can you advise.
There is a tablet with freerider hardware that previously worked differently. Now they gave me betafpv lite radio 3 and I can't see either the tablet or the simulator on the laptop. Can you give me some advice. I will be grateful
can you connect it with a phone
Hi, im having really bad issues with the radio, i been trying to upgrade the firmware but i can get the radio to set up mode. Do you know what can be happening?
Hi I'm trying to find the other video you mention when you are binding the radio and you mentioned if you are having problems binding because the sticks are in the wrong position and that you made another video on it? I can't seem to get this to bind with my x knight 360. The receiver is correctly in binding mode and the lite radio is set to lbt mode which it should be..
ua-cam.com/video/7ZUe-sC7mmU/v-deo.html
It seems there is now an ELRS V3 update. However, still a candidate. So do it at your own risk. But this shows that a stable ELRS V3 will definitely be possible or perhaps already is...
BETAFPV would have had to do that no matter how if they wanted to keep their remote compatible with new products...
Oh mine binds, but the drone is just flipping around and rolling around in beta flight and also when I move the throttle it’s glitchy all the controls are glitchy and freaking out so I went back to my Boxer remote. Just trying to have another little remote, I can use in my car when I’m working not having to bring the radiomaster out
try this: ua-cam.com/video/7ZUe-sC7mmU/v-deo.html
@@Datfpvhmm. I did this and still like when I have the throttle all the way down. It’s about an eighth of the up still and when I move the throttle up just a little bit it goes full throttle that’s it. Everything is just basically two steps instead of being fluid. So back in the box. Lol 🤦♂️
I need help binding a Flywoo firefly 1s nano baby elrs
I am a kid do you think I need to do all the stuff on the computer or no
what jack port is being used for?
It is possible change from mode2 to mode1?
Awesome rundown thanks! Do you know how to set a certain switch (SA) as arm/disarm in the configurator? Or is that a Betaflight thing?
I am brand new to FPV and just received my TinyHawk 2 Freestyle and trying to get it set up with my BetaFPV LiteRadio 3
did you find how?
You have to go to the modes tab in beta flight and you can set all your aux switches in there!
I bought a cetus x fpv kit and it came with the light radio 3. I now have bought the meteor 65 and I cant get it to bind with the radio. Do I need to unbind the cetus x??
How did you get your Cetus to connect to the pc or com port In pc I’m having trouble
What mode for sim
I click connect and it changes to connecting but stays blue and doesn't connect at all.
Unable to get Windows 11 to recognize the controller. Great video, though.
What do you prefer literadio 2 or 3
think the 3 is a winner to be honest, better switches and the size is good, built in battery and external module bay - and the lanyard attachement ring - now thats a winner by itself!
I purchased mobula 7 elrs version, I bought the beta light 3 rc . It worked fine at first in sim but now right roll joystick doesn’t respond at all and as soon as I start sim it spirals out of control without any input . Besides that issue I never got it to pair with the mobula .. it just never paired I understood instructions . 1 red blink = elrs version when I press bind blinks for 3 seconds then stops , it never binds . There is no bind button on mobula 7 1s HD .. when connecting mobula 7 to my pc . Pc never recognizes it’s connected , neither can I connect mobula to beta flight .. I’m so aggravated my vacation is almost over and I never got this pos to work .. thinking of returning everything and giving up trying to fpv.
I'm having issues binding with my moblite 6 on d8, have you experienced anything similar?
it could be a firmware issue on the controller.. maybe?
@@Datfpv could be! Support thinks it could be something called Swamping
can wa connect the controller to an iPhone?
don't think you can?
Im having trouble with mine: I got it to use with simulators to learn to fly before investing in some actual drones as I was using a game joystick but it wasnt great. It initially connected to the configurator and worked fine for the first few times when I connected it in USB mode to Velocidrone but has now seemingly given up the ghost.
If I connect to configurator, it works fine and all the sticks respond. I have factory reset it to be sure but when in USB mode, I get absolutely no response moving the sticks, despite it being listed under USB devices and its recognised in utilities such as "Joystick Show"
If anyone can offer some pointers, it would be greatly appreciated!
Did you ever get it to work?
leaving this here for anyone who might run into the same problem I did, make sure you're using the cable the controller came with
Like for the video. And good luck dude if you're still alive! Tell me how this equipment is detected when connecting to the configurator in the Device Manager of the control panel. Or is it just a joystick, well, certainly not a com port. I just don’t want to connect to the configurator.
Hello friend, all right, congratulations for the channel and the videos, I'm sending you this message because you do it very well, you could ask me a question, I would like to buy the Hapymodel Larva X drone, but there are 3 models, FRSKY D8 BNF / FLYSKY BNF / DS M2X BNF , I don't know which one to buy, I'm also seeing the control, I don't know if the Betafpv 2 SE or the Radiomaster T8 works with this drone, if bindan, if you can help me I appreciate it,
Hey Dazz, I've been trying to figure out a relatively inexpensive radio to fly my Eachine E010S micro with. I have a Tango 2 that I fly the Rekon 3 that I got from you and my other quad that I lost, but I don't have anything to fly the Eachine with. I was going to try to put a Crossfire Nano on the E010S, so I could use my Tango 2, but TBS said it probably couldn't be done. Now that I know about the Beta FPV LiteRadio 3, I might just give it a shot. Thanks for another very informative video. see ya in the next one.
none of the new elrs systems have a button
Hi
I bought a literadio3 remote from this company. and they sent me a broken remote. The control d8 channel is not working. I sent an e-mail for 3 months. they did not give a positive return in any way and they made me suffer. Absolutely do not buy products from this company.
I hit road blocks every were I go. download will not find the updated firmware and manual download it does not load. flash this flash that,. 3 software and drivers and scripts I have a desk top of crap just for these stupid drones!! Ive been at this over a week maybe 2 weeks and it wont bind. It has to be the transmitter but i can only flash it with version 1 something. sometimes it sees the port sometimes it does not but Windows always sees it. gripe moan piss and complain well its not important its just a toy to me.
How can i change de channel values innreceiver tab in betaflight with a literadio3. Im stuck with this issue...