After more than 2 years my car was with Mr Kelvin at Cartune NZ. In these 2 years I was overseas. Had no contact with him whatsoever. I told him exactly what I want done on my car, Holden VL. Seeing my car today after 2 years, the car looks exactly the same. He did everything I asked of him & he even put my car on hold for me during this time. Very happy with his work & his price. Highly recommend for the car lovers. I will definitely take my car back to him for any job. Thank you Mr Kelvin for your awesome service.
Hi im from south africa. Im injoying your videos. Can you tell me how to wire my lambda sensors. I have install 3uz engine with toyota hilux manual gearbox. The wiring harness does not have wires in for the exhaust sensors. Thanks Jan
Hey Kelvin, I have a 2GR TRD supercharged swapped MR2 running the Link G4+ ECU the car has been tuned and runs okay and makes power BUT! It stumbles when you try to rev the engine from idle or if you try to blip the throttle on down shift…. Ive changed throttle body, checked coil packs, checked fuel injectors, checked timing and everything checks out. Ive even rewired the full engine harness to ensure it was fresh with no wire breaks. But no change. I did notice that my current fuel reg is rated to 43PSI (Radium No3) would this reg be my nemesis for poor throttle response from idle. Should i run the radium No4 regulator with is 4 BAR 58 PSI? Cheers Damo
After more than 2 years my car was with Mr Kelvin at Cartune NZ. In these 2 years I was overseas. Had no contact with him whatsoever. I told him exactly what I want done on my car, Holden VL. Seeing my car today after 2 years, the car looks exactly the same. He did everything I asked of him & he even put my car on hold for me during this time. Very happy with his work & his price. Highly recommend for the car lovers. I will definitely take my car back to him for any job. Thank you Mr Kelvin for your awesome service.
Hi im from south africa. Im injoying your videos. Can you tell me how to wire my lambda sensors. I have install 3uz engine with toyota hilux manual gearbox. The wiring harness does not have wires in for the exhaust sensors. Thanks Jan
Do you know where I can source 12 pin connectors for the transmission 3uz 5 speed?
Does the lambda 1 always mean it's on bank one? Lambda 2 = bank 2?
Hey Kelvin, I have a 2GR TRD supercharged swapped MR2 running the Link G4+ ECU the car has been tuned and runs okay and makes power BUT! It stumbles when you try to rev the engine from idle or if you try to blip the throttle on down shift…. Ive changed throttle body, checked coil packs, checked fuel injectors, checked timing and everything checks out. Ive even rewired the full engine harness to ensure it was fresh with no wire breaks. But no change.
I did notice that my current fuel reg is rated to 43PSI (Radium No3) would this reg be my nemesis for poor throttle response from idle. Should i run the radium No4 regulator with is 4 BAR 58 PSI?
Cheers
Damo
Lambda and dash can work on same wiring correct? Just got to tell ecu dash device 1, and lamda on device 2?
Correct. Many devices can be on the same bus (can channel) provided they all are communicating at the same speed