Beautiful looking shell, beautiful numbers and it's based on a character I absolutely love. I have even more of a reason to hunt these blasters down! ^-^
Chaylo, you can easily take an Apollo handle and stick it in the bottom of the blaster around the breech, and it will easily allow it to accept mags. Make sure to preserve the little fingers on the inside that hold the rest of the internal magwell in place, or it wont easily accept outside mags! I'm working on making a prototype magwell for this specific purpose though, so I'll shoot you and Walcom an E-mail whenever I can get around to finishing it.
Awesome sauce! I can't wait for the phantom corpse one. I'm so excited for this blaster and the mediator/attachments. Not a big fan of dead pool so I'm holding off for obvious reasons. Was bummed to find the Apollo couldn't really handle an upgraded spring so really glad this one can and that it makes a significant improvement. I look forward to that mod. That's a terrific idea.
Got K26 in mine now with 6 round capacity and ammo cover removed. Although it’s harder to prime it was well worth it. Shoots 30+ yards with a flat trajectory. It’s so incredible. A good side arm to compliment my 3s powered Nemesis
That's crazy! Would not have guessed it would shoot that hot after just a quick spring upgrade. I'm curious to see if it can handle the upgrade long term without breaking, all the other rival springers are notoriously bad about breaking themselves.
hello cap'n X, I am going out to get a Kronos today and although I will eventually order a k26 I was wondering if there was a spring I could pick up at hardware store that would suffice. Your content is awesome keep up the good work!
So for future reference, when firing down range for demos, do it opposite the position of the sun so the shines bounces back. All this does is add glare and makes the balls hard to see
Hi i did this mod to two blasters..... i planned to make a matched pair.....i didnt put k26 in either blaster yet but i did fill the base of piston with 5 min epoxy to fill the void.... both blasters feed fine in the magazine tubes....one shoots fine but one blaster has balls getting stuck at the front of the barrel....sometimes it shoots fine.... any ideas?
Captain, I am planning on finishing a long overdue project. I am planning on adding an air blaster on the top of my stryfe as you have done in some older commissions. What blaster would you reccomend? (panthers are hard to come by in Australia)
That was so simple! I might try it, even without any modding experience. Do you think this blaster painted black and with an added silencer would make a good mgs1 socom for cosplay?
Cooper did a test and a review. He said that i had shot about a 100 or so shots with the blaster, and stats that the stock average fps is 90 as the box advertised. Could there really be this much difference, or are your blaster a lemon?
i saw the video where you helped "the nerf curator" with his mod too. there in, you also wrapped some plumbers tape under the O-ring on the plunger head to get a better air seal. how much do you think that effects performance?
Captain, is there any chance you would be willing to sell a barricade shell, if you have one? Just the shell. I've been wanting to make a drain blaster with the shell, but I can't find any when I go thrifting.
Brian Leach If he doesn't have one, there's a knock-off for $20 on Amazon that has a pretty cool shell. Search for "World Tech Renegade" and it will come up. It's red and black. The shell is actually bigger than a Barricade (longer) which might be good, depending on your build plans.
Captain Xavier an rscb clip is a high powered gravity fed inline magazine. Like.... a homemade buzzbee monorail there are some tutourials on youtube that show how to make one
@@CaptainXavier i meid a hole in de gun and Electrical panel to shoot Loaded Capacitors same as blaster from Star Wars but i dont now what is de best diameter and Length for rival ball i already improved de spring and took out de Air barrier but i dont have rival gun to measure
does anyone know the fps of a kronos with a k25, or what spring should I use to get under 125 fps? Also should I put foam at the front of the plunger head?
Mine I was able to make it shoot a average 160.FPS Because it actually had a air restrictor So that out and actually giving it a good seal with sealing tape
Will it run the k26 reliably? I just got one of these and I feel like I got a lemon cos like urs it's about 75fps stock (others on chrono seem to be around 90 stock). I notice a second o ring, think those are the problem?
That sort of curved internal magazine could be totally changed for feeding from normal rival mags (some shell modifications). Also, if a maverick can be rigged with stampede electronic springer guts after a loooot of tinkering then how about this? *can't help but imagine a nerf rival PP-Bizon*
Captain Xavier always do 😁...but it seems like the power increase also seems to cause the rounds to spiral unpredictability after a certain range...could you reduce the length of the k26 by a touch to increase precision?
I bought four of theses sets 1 for my self one to leave in box and other one to give to friend.. I was going to send u the last one caption but jomo beat me to it .. I 'll still be sending u a package soon.
If u don like hammer shots, I’m assuming you don’t like hammer prime blasters in general. In that case, there are a variety of ways to one hand prime strong arms/ Mavericks.
+Captain Xavier yep, also i think you mentioned that the normal ones have a better performance right? I reeeally want to get two of those, mod them, and paint them as well, the problem is that them are hard to find here in Ecuador
Captain Xavier If it was a nornal elite or mega blaster it would be normal but it just seems very wierd as the Rival line usually gets 90-100fps, wouldnt make sense to weaken this one
Out of curiosity how well do you think these will hold up with the existing plastic internals since there are a few smaller piece that seem like if anything were to break they would. Additionally could you post an image of the internals for those of us who inadvertently dropped our blaster midk26ing and now have a few pieces we have no clue where go or how they fit together.....asking for a friend....maybe
Naptown nerf did crono on his stock version he fired both unmodified and fps was high 80s and a lot in the 90s. Are you sure your crono is calibrated? Seems like a big difference in testing. I'm just wondering because k26 seems the way to go just may not quite be as you say if indeed your fps is off. The box does claim 90fps and usually rival is right on with there numbers. They would have put 75fps not 90fps as it states. I'm not trolling you I'm a big fan, watch all your videos just seems odd to me. K26 is a good mod and I've k26 many blasters myself just saying that it does add range but fps is never double. Think about it. Double fps in a rival blaster with just a spring upgrade I doubt it and I'm not talking out my A here. I mod, I have many blasters, fired many blasters. Do you smell what I'm stepping in? Its kind of shmelly
i know you wanted it, I do what i can sir
Jomo Lettman What you can is a lot more than many of us, lol. I wish you were MY patron, too, with all the spiffyness you send the Captain. :P
Beautiful looking shell, beautiful numbers and it's based on a character I absolutely love. I have even more of a reason to hunt these blasters down! ^-^
I love that the captain's mod music plays throughout normal time, it gets me happy. 👍
Chaylo, you can easily take an Apollo handle and stick it in the bottom of the blaster around the breech, and it will easily allow it to accept mags. Make sure to preserve the little fingers on the inside that hold the rest of the internal magwell in place, or it wont easily accept outside mags!
I'm working on making a prototype magwell for this specific purpose though, so I'll shoot you and Walcom an E-mail whenever I can get around to finishing it.
Awesome sauce! I can't wait for the phantom corpse one. I'm so excited for this blaster and the mediator/attachments. Not a big fan of dead pool so I'm holding off for obvious reasons. Was bummed to find the Apollo couldn't really handle an upgraded spring so really glad this one can and that it makes a significant improvement. I look forward to that mod. That's a terrific idea.
Thanks so much for the guide cap! I look forward to trying it out!
Got K26 in mine now with 6 round capacity and ammo cover removed. Although it’s harder to prime it was well worth it. Shoots 30+ yards with a flat trajectory. It’s so incredible. A good side arm to compliment my 3s powered Nemesis
The poping sound of the K26 one is music to my ears! I want one so badly .......
i've been waiting for this, yes!
The pump action SG with increased ammo capacity is pretty much my dream blaster.
Wow, that’s a huge difference!
That's crazy! Would not have guessed it would shoot that hot after just a quick spring upgrade. I'm curious to see if it can handle the upgrade long term without breaking, all the other rival springers are notoriously bad about breaking themselves.
I can't wait to get my hands on a pair of the not so expensive ones and mod them.
hello cap'n X, I am going out to get a Kronos today and although I will eventually order a k26 I was wondering if there was a spring I could pick up at hardware store that would suffice. Your content is awesome keep up the good work!
Not that I know of. #55 would probably be too short.
Caption Xavier I could see the pump grip off of the atlas or Out of Darts artimas pump grip looking good on the Kronos Shotgun .. Thoughts??
It would depend on how you implemented the pump grip.
I would love to see a video comparing k25 with k26 in a kronos
So for future reference, when firing down range for demos, do it opposite the position of the sun so the shines bounces back. All this does is add glare and makes the balls hard to see
+Thanhtacles sadly this would involve me firing into traffic...which is frowned upon...
I’d love to see it pump action👍
Well I'll tell you one thing... watching your videos really makes me want to get a cordless drill.
They are wonderful!
Captain Xavier, I highly recommend that your remove the jam door. Its no use.
Caption Xavier you should also try and make a left hand safety for your self on the one u make a shotgun
MAGNIFICENT!!!
By the way it's a shotgun pistol you can double load it that's hit the unjam door you can put two rival balls in the barrel
Can u make a access door delete guide
Hi i did this mod to two blasters..... i planned to make a matched pair.....i didnt put k26 in either blaster yet but i did fill the base of piston with 5 min epoxy to fill the void.... both blasters feed fine in the magazine tubes....one shoots fine but one blaster has balls getting stuck at the front of the barrel....sometimes it shoots fine.... any ideas?
MUST. HAVE. KRONOS.
Those stock chrony numbers seem a bit lower than others I've seen. Still very impressive gains with a 3min mod.
+OC Nerf so I have heard...might be a lemon...or bad ammo...
The white one gets 90-95.
Hope the out of darts spring works well on the corps edition
Now i really need these blasters
what do you think about the new MTB video on the hammershot mod that changes it from 5 Elite shots to 4 Mega?
+jonathan gates I want one...bad...
Captain, I am planning on finishing a long overdue project. I am planning on adding an air blaster on the top of my stryfe as you have done in some older commissions. What blaster would you reccomend? (panthers are hard to come by in Australia)
+Trent Grace XBZ
That was so simple! I might try it, even without any modding experience. Do you think this blaster painted black and with an added silencer would make a good mgs1 socom for cosplay?
+Verse1234567 probably, but I would wait for the $20 version. :p
Can it take a k26 doomlands double dealer
Did u know I did the first American phantom corps nerf rival kronos review?
I did not. Is it significantly different than the Deadpool versions? Besides color?
Captain Xavier, no.
Cooper did a test and a review. He said that i had shot about a 100 or so shots with the blaster, and stats that the stock average fps is 90 as the box advertised.
Could there really be this much difference, or are your blaster a lemon?
i saw the video where you helped "the nerf curator" with his mod too. there in, you also wrapped some plumbers tape under the O-ring on the plunger head to get a better air seal. how much do you think that effects performance?
+shadowsa2b I doubt it makes much of a difference but I would need to compare two to be sure.
I had the same idea of pump action shotgun using these. . . Damn it capt get out of my mind.
I would say the K26 suits this blaster the best. Do you agree?
+Thepump well...I basically say that in tue video so...yes?
Captain, is there any chance you would be willing to sell a barricade shell, if you have one? Just the shell. I've been wanting to make a drain blaster with the shell, but I can't find any when I go thrifting.
Brian Leach If he doesn't have one, there's a knock-off for $20 on Amazon that has a pretty cool shell. Search for "World Tech Renegade" and it will come up. It's red and black. The shell is actually bigger than a Barricade (longer) which might be good, depending on your build plans.
Hey cap!
Would you consider making an rscb barrel for eir?
+thegullasch o a what?
Captain Xavier an rscb clip is a high powered gravity fed inline magazine. Like.... a homemade buzzbee monorail there are some tutourials on youtube that show how to make one
Can i have some hints of what *cheap* blasters i can dual weild?
Define "cheap"
Would it do anything to brass barrel a rival blaster?
Not really
Hey, Nice easy guide. Can you link where you got the springs?
Out-of-Dart's Etsy shop
Captain Xavier quick reply, thank you.
What is de Internal Diameter and barrel Length for 3d print rival adapter
Adapter to what?
@@CaptainXavier i meid a hole in de gun and Electrical panel to shoot Loaded Capacitors same as blaster from Star Wars but i dont now what is de best diameter and Length for rival ball i already improved de spring and took out de
Air barrier but i dont have rival gun to measure
Hello there good morning!!!
does anyone know the fps of a kronos with a k25, or what spring should I use to get under 125 fps? Also should I put foam at the front of the plunger head?
Tobaganner I would highly suggest that and also when you rub Vaseline around the O ring it helps with the seal
Now that I have a Kronos, I have a proper reason to be on this video! xD
Mine I was able to make it shoot a average 160.FPS
Because it actually had a air restrictor
So that out and actually giving it a good seal with sealing tape
If you made a pump-action Kronos mod kit for sale, I think it'd sell like gangbusters.
Can the internals handle the extra spring load? Any chance of breakage you think? Thanks!
+Brant Lisk no, the intetnals are the strongest I have ever seen in any blaster.
Captain Xavier thanks for the quick reply!! Just subscribed
Question! Is it allowed to use your commission email for non commissiony stuff? i.e. questions, heads up for sending you stuff etc.
+LightningEagle14 yes
will a number 55 spring work in this?
+A&B Productions It might, but I doubt it. 55 is denser so compression would probably be an issue.
Will it run the k26 reliably? I just got one of these and I feel like I got a lemon cos like urs it's about 75fps stock (others on chrono seem to be around 90 stock). I notice a second o ring, think those are the problem?
+Salt Miner I had the same issue with one of mine. I have not gotten around to diagnosing it. I will look when I get the time.
Where can i buy the k26 spring?
www.etsy.com/shop/OutofDarts
Captain Xavier thanks is it as good this cutting it down yourself as this guy said out of darts springs are too long
That sort of curved internal magazine could be totally changed for feeding from normal rival mags (some shell modifications). Also, if a maverick can be rigged with stampede electronic springer guts after a loooot of tinkering then how about this? *can't help but imagine a nerf rival PP-Bizon*
Captin, will k26 make the impact on a person hurt a lot more than the stock blaster will hit?
+Will McBrayer ...obviously? It is traveling almost twice as fast...
thank you for telling me.
Anyway to buy the springs cut from you? I got these and I've never modded a blaster before so I have no materials. Thanks
+Omero Hernandez I believe Out-of-Darts is planning to sell springs for it on his Etsy shop soon.
Captain Xavier thanks man, I'll be on the lookout
I know I’m late, but I’m wondering what spring that is?
...k26...
Captain Xavier thanks
Are there any air restrictors or locks to remove?
+2randomcrap3 yes
Just popped a k26 in...the power increase is truly substantial...any tips on increasing the accuracy?
+erick hanson aim for the middle.
Captain Xavier always do 😁...but it seems like the power increase also seems to cause the rounds to spiral unpredictability after a certain range...could you reduce the length of the k26 by a touch to increase precision?
So cool
Can it take a K-26?
Yes
What about the nitefinder
+Trapped_In_The_Matrix what about it?
That's not the easiest to put k26 in?
Nope. It actually has more screws and there is not a super clear k26 length indicator, and you have to remove the plunger head.
Is this what a k26 mod is? I'm sorry I'm new to this.
+Joshua Erez yes
Thank you so much
That is the left hand one
I bought four of theses sets 1 for my self one to leave in box and other one to give to friend.. I was going to send u the last one caption but jomo beat me to it .. I 'll still be sending u a package soon.
They are an amazing blaster I don t know why they have not had them sooner.. I love em.
+Andrew Pickering you go right ahead and send me another set! I'll make shotguns out of them and send you back one...assuming it works...
That would be awsome I 'll get it sent as soon as possible.. have to work doubles all week so I will get them sent asap
I am guessing u are going to put in k 26 lol
Lucky bast.... I mean, you are one lucky guy.
You cut the footage at 1:55 :)
+CelestialVulpes ...no I didn't.
Your crono is a bit of when coop tested it it was getting 90 stock
+theherthstonemaster no, the range was poor too, so I think I got a bad blaster
I have a phantom corps Kronos and it shots a lot harder then that!
Right? Yeah, it is a lemon, that has been established.
Chrono a Kronos, what do you know...
Going to wait because I am cheap.
Just a little difference between stock and k26 just a little bit....GEEZ LOUSIE I NEED A K26 KRONOS
What blaster would you suggest for a one handed secondary
Hiekeech hammer shot!
Other than that
+Casey's Comics Sweet Revenge
If u don like hammer shots, I’m assuming you don’t like hammer prime blasters in general. In that case, there are a variety of ways to one hand prime strong arms/ Mavericks.
I have a video on it if your interested. ua-cam.com/video/cBjS1ipelHE/v-deo.html
Hey
Hello
All the best people are left handed cap 8)
:D
Captain my captain pump action nitefinder
+camocat25 just the other day I did something far sillier...
Captain Xavier oh I've made a nerf musket also thrifting I got star wars battlefront 2 and star wars battle front renagade for psp .
I think this is a bit overvalued, i mean, you could get 2 of the normal ones for $40 and paint them Deadpool style, maybe even better
I agree...which is why I did not buy myself a set.
+Captain Xavier yep, also i think you mentioned that the normal ones have a better performance right? I reeeally want to get two of those, mod them, and paint them as well, the problem is that them are hard to find here in Ecuador
DANK
What about lock removal? Can the taco take k26?
The lone Assasin what about it? And yes.
Captain Xavier can you show how to deprive it without using that tiny little button
Deprime not deprive. Dumb autocorrect
+The lone Assasin I do plan to tinker with that eventually.
I want it so bad
Its wierd, you got 70fps average yet coop772 fot 90fps average with same blaster... wierd
+CoolConGaming yeah, I think mine might have been a lemon...or bad ammo. I thought it felt low...
Captain Xavier
If it was a nornal elite or mega blaster it would be normal but it just seems very wierd as the Rival line usually gets 90-100fps, wouldnt make sense to weaken this one
Out of curiosity how well do you think these will hold up with the existing plastic internals since there are a few smaller piece that seem like if anything were to break they would. Additionally could you post an image of the internals for those of us who inadvertently dropped our blaster midk26ing and now have a few pieces we have no clue where go or how they fit together.....asking for a friend....maybe
My school has six gear up mavricks
Noice! ...why?
Naptown nerf did crono on his stock version he fired both unmodified and fps was high 80s and a lot in the 90s. Are you sure your crono is calibrated? Seems like a big difference in testing. I'm just wondering because k26 seems the way to go just may not quite be as you say if indeed your fps is off. The box does claim 90fps and usually rival is right on with there numbers. They would have put 75fps not 90fps as it states. I'm not trolling you I'm a big fan, watch all your videos just seems odd to me. K26 is a good mod and I've k26 many blasters myself just saying that it does add range but fps is never double. Think about it. Double fps in a rival blaster with just a spring upgrade I doubt it and I'm not talking out my A here. I mod, I have many blasters, fired many blasters. Do you smell what I'm stepping in? Its kind of shmelly
Coop also got around 90, I think captain's was a lemon. Either way tho, k26 is definitely worth it.
I definitely got a lemon. We compared it at our mod party last night. Not sure what is wrong with it yet...but something is.
You have 4 kronhos now ? Can you give away some of them plz ? Plz
No, I currently have 2
It says balls.
fourth!
what, you thought i'd say something actually related to the video?
Where do i find k26 springs?
OutofDarts.com
@@CaptainXavier thank you