Brett's first turbo LS third gen build smashes out 800whp first day at dyno
Вставка
- Опубліковано 4 лют 2025
- i have been harping on brett for the better part of 10 years about swapping out his 406 carb small block powerplant that really did run great for him, but times changed, the small block came out, the turbo LS went in and this was just the first shakedown dyno session!
i got copyright pee pee slapped already for this jawn, pfft
for what???
@@richardscarlett7942 Mr Rogers?
How much for a tune
Michael Capranica if you gotta ask how much, it’s probably too much.
Kfx Guy or someone wants to know how much something cost
100k that's just about the time they are ready to be a race motor... Right?? Been a subscriber for 10 years, congrats Matt its well deserved, and overdue sir.
You have gotten me so used to the technical aspect, I was surprised to see dyno pulls for more than a min. You have truly taught me alot and look forward to the talking parts in videos like this. Thank you for all you do
That's one bad ride done right. It would be great to see you interview him about the car and what he did. Thanks Matt for all you do
it's neat to drive by on a sunday and see stuff getting dynoed and wait a couple days to see it on youtube to see how much power it made
First time I've ever commented on a video of yours but....This is inspiring stuff man. I swear I've watched every one of your videos. I've learned so much from your channel. Easily is the best performance channel on youtube. Wish there was a way to shake your hand and say thanks for all the great content. Keep it up man! Absolutley love it!
literally all i need is this reply, thanks for watching
Even after watching all you stuff I was not totally sure you were a real person til you just replied lol. Just pretty cool you take time out of your day to comment.
Damn lost a fella 400 guy!
Great build ! Compression is your friend👍🏻👍🏻👍🏻 making great power! Looking forward to the follow up vid!
Somthing funny, I only comment on your videos because I heard it helps the channel. Thanks for all your hard work.
Definetly taking a page out of this video and hopefully at the end of the year, have this set up. Having a turd gen with a 305 is just plain unamerican with ls swaps sweeping me lol thank you!
Congrats on 100k Matt! Well deserved for sure. Probably one of the oldest consistently uploaded channels for sure.
Hell yea! 100k subscribers. Excited for the give a way
What a sweet build..
Also congrats on hitting 100K subscribers Matt. Looong overdue.
I think I just sprouted a mullet watching this video. That thing is bad! Welcome to the dark side Brett!
-Dane
I never saw a guy with a mullet
Owning or drive one of these when new now a second gen all time
Hahaha! Dane you'd look bitchin with one cruising around in the Twinnebago!
@@masoncampos7043 The Twinnebago is gonna send my mullet into overdrive! haha
Congrats on 100k get that play button! Lol and smooth 800, love me some 3rd gen
Congrats on 100k, should have happened sooner but you're convincing a lot of 'hard to convince' people there is a better way. My 6.0 is at the machine shop ready for pickup with similiar components to this one. I'm so excited to get it on the street.
Any body else waiting for this build to go into the wiki?? This really ticks alot of the boxxes for my build! Top video!
I’m so ready for warmer weather so I can finish my sloppy setup,the videos keep me motivated
Congrats on the 1000 Subs! That's so bad ass, thanks for the all the info you put out and the inspiration!
Thirdgen looks like mine does, love it.
Just hearing you describe this build gave me chub! It sounds exactly like what I'm wanting to turn my 6.0 into
oh my, if only Bob was here to paint Camaros !! Congrats Matt !!
I just bought a 91 thunderchicken and now Im roaming the internets for ideas, I like this videya the best.
Definitely need more information and story! I checked the wiki and don’t see the build on there
Very solid combination! Gives me hope for my project this year!
Can't wait for the sit down talk with Brett about the car! One and done!
Looking forward to the next video on this car. I'm looking to build my third gen much like this and would love to hear from Matt in detail!
100k..!! long over due. 👍
Congratulations on 100k Matt 🍻
These intros make me smile😁
Gr8! Post matt!! Yes want a video on the particulars with Brett.
Nice job on the build Brett! Congrats!
Looking forward to the interview with Brett.
Congrats on the 100k!
Congratulations on 100k!!!!
Please give us the heads up when the build details end up on the wiki.
Great work!!
I was thinking "he's playing too much of the song" oh well there goes that $1.29 of ad revenue
Feels
Lights off super fast! Neat job.
Sure hope you're still planning to do the interview with Brett video!
As soon as the turbo starts spoiling everyone surrounding the car starts sprouting a mullet at the rate of spool. Throw in a Air to Water inter cooler and fill it with Busch Light and you’ll pick up 1k hp, and your cousin!
Seriously though, nice third gen and great numbers. Love the wheels.
100,000 Matt!! Or Jamie i should say. Lol... ✌edit... summit & Jegs needs to give Matt marketing $! Completely sold me!
i am working with summit on a weird stroker engine build coming soon!
I put summit pistons and summit rods in my aluminum 5.3. It’s nice stuff. I’d put money on it that the pistons are made by wiseco. I compared them to a set of my buddies wisecos and they were identical except for grooves cut between the ring lands. All other markings, machining and shapers were the same. Including the wrist pins.
For sure, they hired a former Weisco engineer
Just commenting to help out the channel. Love your content
Your buddy looks like a ghost disappearing at around four minutes
And the charge pipe morphs back tight again!
It’s magical brett
Awesome vid, however I did shed a tear when I saw that it wasn't the truck dyno video.
That’s next and 100k cam video and, well I have to do some burnouts
ATTENTION EVERYONE: Go buy some sloppy merch these amazing people are going to need some extra folding money to put in the tire fund.
Really awesome and I can’t wait to spin up my gen 2 7875 👍
Would love to see more of this car!!!!!! I’d like to copy the hot side
Hey Matt did you ever upload this to sloppy wiki?
The big bad wolf cosmetic to blow your shop down! 😤
Nice power levels! Even nicer 100k subs
Nice car. Great results.
Congrats on 100k!
Damn that thing is going to be fun. 👍🏼
I’d love to see the 800hp tune in the tune cabinet
It’s there
What rear gear is in this car, I have most of the same setup going in soon with a glide
Looking forward to that interview. Bad*** build
Damn I wish I had a garage to start my build already.
Do you know the part number to the pistons that he is using? Also is there a link to see his build pictures?
Hey that's the same converter I chose. Cool!
Hey, what manifolds did he go with? Some pics of the hot side on this car would be awesome. Looking to do same build
If it wasn’t for the strike I would ask for this to be at the start of every video lol.
Mr. Rogers, not creepy at all.
Im curious to which turbo he is running. Just picked up a Gen 4 rodded LQ4 for my Turd Gen and a LY6 for my G8. The saga begins! LOL!
VSracing 7875 gen2 billet
@@SloppyMechanics Wow. Is it that much better than the Gen 1 7875?
i hope he has a good rear end lol things nasty
And driveshaft. And u-joints. And...
Its a self solving problem, you break it you fix it
thumbs up for mister fukkin rogers
Good Job! But did anybody notice the guy just disappear at 4:39
Tommy954rr ghost tuner lol
Pretty sure that's the long shutter speed of the camera being used
I see dead people.😭
Went back to 1988
Still waiting for engine management prices to come down. It keeps going up. I do love my HP Tuners.
Nice now let's see 996rwhp!
Sounded like the 4303 is keeping up for now. Do you believe it would begin to struggle with a full tank of ethanol at that power level or would ot still have some room?
4303 with appropriate feed and whatnot will go 1000whp on ethanol, ive done more than one.
Welcome to the fold, brett!
Holy fuck that's some get-up-and-go!
If only we had e85 a lot more here in Georgia... 93 it is for now!
Is the turbo manifold custom or can it be purchased?
Guess I'm naive about how to set up a dyno run, but what the hell is holding that vehicle on the roller? I always have a mental image of the rear wheels hitting the ground at full throttle, with the momentum of the drive train, flywheel and engine rpm's at the 8K mark... 😳
Are there pictures of the build-up of the engine?
he does have them
I would like to see some track videos of this car!
You will he races alot
good video , embarking on a budget 6.0 ls third gen video myself , with ms3x .
it must be hard not laughing at the trailer big block cars
Here cause of uncle tonys garage
Are yall doing closed or open loop tuning on these cars?
Yes, if you watch the portion where I go over logs I show the cl%
Matt! Is that you singing the intro for the vids?
Man I wish my voice was that nice, maybe I’ll try next time
100k! Woo hoo!
What do you think is best for a everyday driver turbo or super charger
goals = build
I'm building a ls 90 obs and my next vehicle I want to do a turd gen solo bad.
What was his estimated static comp. ratio with the pistons he installed?
What rear end?
Sloppy on the dyno.
I’m in.
This boomer approves of the thirdgen lol 100k man that's cool haha.
john coffman ok BOOMER LOL.
My vs480/210lb/6.0 Colorado recipe/clone in my 69 Camaro is ready for a Denbob tune. It’s on terminator x max with dbw. Can we set that up?
Was that Patrick Swayze at 4:31?
I have the Jegs 555-60431 its awesome. It's a little higher stall than the 60429. Can't beat it for the money.
Way to go on the 100k also the axle might be bent or the wheel, either way something's fuky
There is a little wobble there eh!
That car is running right. 😁
Is there a recipe on this thing
i said in the video i want to do a wiki entry for it, since its so successful
Sloppy Mechanics Looking forward to the details to duplicate
So what do you think of that summit stage 2 cam
I think it’s a great cam
Is this on e85?
Yes e50%
Sloppy Mechanics I just took off Fitech and Deka 80s for Terminator X with 210s. Think they tune would get car running to get to dyno on e70 with BTR stage 3 cam?
Is this a 5.3 or a 6.0
This is a 6.0
I am brett 😭😭
I wish my car made it to one of your videos :(
What car? I think I have video of 75 cars in my to do bin
Sloppy Mechanics black 15 mustang lol You ran the dyno for me 680hp then and the fuel pump was bad and I pullied down.
Sloppy Mechanics so it’s a little beefier now and I’m always available :) I wouldn’t even mind you tuning it if you wanted to
This video makes me wish I could start my build sooner. Smh #pofolk
Beautiful car. Its you I like.
100k woohoo