I absolutely love the way you broke it down to three levels. I've used a Pelican and a Nanuk and found myself constantly swap things out, but now I've been approaching productions in a tier system and really enjoyed watching your take on it. Subscribed for more videos like this!
Nice system. I'm at the point that dedicated case are begining to be relevant for some productions. I might built something like this, adapted to my kit need!
For sure! The nice thing about TrekPak is once you have enough of it you can almost endlessly reconfigure to suit changing needs. We are about to do a revamp of our case layout again because we got a new drone and are simplifying our E-mount lens lineup
I have had to check my peli 1535 (smaller by a bit) under a plane on 2 occasions to small airports in Virginia and Durango Colorado. I had it loaded with lithium ion batteries and they made me hold them in my lap. Tried all the tricks and it didn’t work. Even checked on one of them and it did in fact not fit overhead. So be mindful of how big the plane is going to be. It was a pain for sure. I have started to add camera bodies and glass to backpacks just to be safe for travel gigs
We actually literally had our first experience of an overhead bin being too small last week after posting this haha. We had even flown into this extremely small airport before and not had issues, but the bins were smaller this time. We ended up strapping one of them into an empty seat, and shoving the other under the seat in front of us and putting our feet on top of it. The stewardess wasn’t stoked about it but I told her there was NO WAY we could check them. I guess the play would be having an even smaller carry-on case if you KNOW you’re going to a super small airport, and keeping batteries and the absolute essentials in there. But you live and you learn I suppose lol
@@connorquigvids aw dang that’s a bummer. Do you have a 1510 or similar? We used to keep just the blimp handle and mics in one of those, but the boompole always just got tossed in the mix and was getting banged up
Careful with those NPFs not connecting to metal! I rarely fly to gigs, but a Pelican 1510 for dedicated things like Audio and Wireless monitor could be useful for me.
@@timdanyo898 watcha mean about the NPFs? We don’t fly a ton either - but when we do, we def appreciate the 1510 (same goes for the 1535 Air but we don’t have any of those)
@@Gloryvisuals batteries can catch fire if they touch metal and it creates a short circuit. NPFs have those metal connector ends that allow energy transfer to the camera. I noticed when you were putting the NPFs back in the case that they were facing each other’s metal sides. Even though the batteries metal connectors weren’t touching because one was flipped upside the opposite, just seeing the active sides touching made me nervous!
@@timdanyo898 ahh, I see - honestly we don’t really use them anymore so I should just pull them out, but they’re nice to have as a phone powerbank in a pinch. I usually put them all connectors down so they aren’t even close to touching but I must have done it that way for some reason this time. Good catch! Will be more careful about that!
With all due respect, small correction - the 1510 is not the biggest size airlines will allow for carry on, the 1535 is their biggest airline suitable case
Thanks for watching, and for the feedback! I should have mentioned the 1535, but the 1510 and 1535 are nearly identical in dimensions. The 1535 is essentially the “Air” equivalent to the 1510.
@@ReggieABrown we have a pair of Shure 215 IEMs in one of the zipper pockets in the lid organizer - this is usually how we monitor audio because of the better seal vs over-ears and the lack of space they take up!
Love the contents of this video. I only say the following in hopes that it helps you grow. Try to add some b roll into the video to help get your points across. The first 3 to 4 minutes was just you talking to a camera and the majority of people will click off because of that. Once again, I hope this helps. :)
@@MSMImage we used a standard 6mm black laminated label for a Brother P-Touch label maker - but the aluminum tags are from Cam Creaux. Link to labels in description!
@@JoATTech it definitely is, but in the long-term with how modular it is, I think it pays off. We went through several sets of foam as we reconfigured and it got beat up from use
@@Gloryvisuals But it depends how big the changes are for the trekpak. If they are revolutionary, the included excess might be not enough :D. I know that from experience :D. Also if you are from 1st world country it's not that expensive. For me it's 4 times more expensive, cause our currency is shit (1/4 of a dollar - but the price is the same as in US).
It’s purpose is as a kicker. Normally I’d have it out of the shot but the whole point of our setup is to have gear in the background. It’s set to 1% brightness 😊
@@mikegustafson6679 guessing you’re meaning this as sarcasm, but ironically it’s spot on. Our clients get to see the places we’ve been, that our cases are used and worn, and the fact that we have a personality. And we’ve gotten nothing but positive comments about them 😊 It ain’t that serious homie.
@@sammorganmoore thanks for that - but this is simply terrible advice lol. We bring (and charge the client for) the gear needed to execute the project. Not only is it more profitable, but if you know what you’re doing it adds to the production value and helps you create better work. Have a nice day!
@@Marcus_Visbal yep just did this for the first time last week. You can actually create your own media passes, we just designed them and laminated them and they worked just great.
I absolutely love the way you broke it down to three levels. I've used a Pelican and a Nanuk and found myself constantly swap things out, but now I've been approaching productions in a tier system and really enjoyed watching your take on it. Subscribed for more videos like this!
Glad it helped! We love the tier system too, definitely made our lives a lot easier!
Nice system. I'm at the point that dedicated case are begining to be relevant for some productions.
I might built something like this, adapted to my kit need!
For sure! The nice thing about TrekPak is once you have enough of it you can almost endlessly reconfigure to suit changing needs. We are about to do a revamp of our case layout again because we got a new drone and are simplifying our E-mount lens lineup
Sweet system! been thinking about gutting all my cases for the trek pack stuff!
@@kyleranney thanks homie! Def fits a lot more and seems to protect just as well. Makes them a lot heavier tho with all the crap you can fit in em 😂
I have had to check my peli 1535 (smaller by a bit) under a plane on 2 occasions to small airports in Virginia and Durango Colorado. I had it loaded with lithium ion batteries and they made me hold them in my lap. Tried all the tricks and it didn’t work. Even checked on one of them and it did in fact not fit overhead. So be mindful of how big the plane is going to be. It was a pain for sure. I have started to add camera bodies and glass to backpacks just to be safe for travel gigs
We actually literally had our first experience of an overhead bin being too small last week after posting this haha. We had even flown into this extremely small airport before and not had issues, but the bins were smaller this time.
We ended up strapping one of them into an empty seat, and shoving the other under the seat in front of us and putting our feet on top of it. The stewardess wasn’t stoked about it but I told her there was NO WAY we could check them.
I guess the play would be having an even smaller carry-on case if you KNOW you’re going to a super small airport, and keeping batteries and the absolute essentials in there. But you live and you learn I suppose lol
I am so jealous of that audio case. Our blimp is warped from not having the right case to carry it in.
@@connorquigvids aw dang that’s a bummer. Do you have a 1510 or similar? We used to keep just the blimp handle and mics in one of those, but the boompole always just got tossed in the mix and was getting banged up
@@Gloryvisuals I wish we owned a single pelican case of any kind 😂
@@connorquigvids you’ll get there!
Careful with those NPFs not connecting to metal! I rarely fly to gigs, but a Pelican 1510 for dedicated things like Audio and Wireless monitor could be useful for me.
@@timdanyo898 watcha mean about the NPFs?
We don’t fly a ton either - but when we do, we def appreciate the 1510 (same goes for the 1535 Air but we don’t have any of those)
@@Gloryvisuals batteries can catch fire if they touch metal and it creates a short circuit. NPFs have those metal connector ends that allow energy transfer to the camera. I noticed when you were putting the NPFs back in the case that they were facing each other’s metal sides. Even though the batteries metal connectors weren’t touching because one was flipped upside the opposite, just seeing the active sides touching made me nervous!
@@timdanyo898 ahh, I see - honestly we don’t really use them anymore so I should just pull them out, but they’re nice to have as a phone powerbank in a pinch. I usually put them all connectors down so they aren’t even close to touching but I must have done it that way for some reason this time. Good catch! Will be more careful about that!
Great video!
Thanks so much!!
Sick video. I’m surprised you didn’t go with the Jason case lid organizer
@@Gavinnations those look dope! Spendyyy tho haha. Didn’t know about those when we got ours 6ish years ago, were they a thing back then?
With all due respect, small correction - the 1510 is not the biggest size airlines will allow for carry on, the 1535 is their biggest airline suitable case
Thanks for watching, and for the feedback! I should have mentioned the 1535, but the 1510 and 1535 are nearly identical in dimensions. The 1535 is essentially the “Air” equivalent to the 1510.
One thing I didn't see no where in sight was headphones. How do you guys monitor audio?
@@ReggieABrown we have a pair of Shure 215 IEMs in one of the zipper pockets in the lid organizer - this is usually how we monitor audio because of the better seal vs over-ears and the lack of space they take up!
Love the contents of this video.
I only say the following in hopes that it helps you grow. Try to add some b roll into the video to help get your points across. The first 3 to 4 minutes was just you talking to a camera and the majority of people will click off because of that.
Once again, I hope this helps. :)
@@jwaugh3 Sincerely appreciate the feedback! Will definitely try to make intros more engaging. Appreciate you watching and for the comment!
its motivating me to repack my pelicans haha love lv1~3 system. i'm sure you will have lv4,5,6 coming soon!! luv it
That's awesome! Good luck on the re-pack! And thanks for the comment. We appreciate the support!
What did you use to print out those labels with the arrows inside the case?
@@MSMImage we used a standard 6mm black laminated label for a Brother P-Touch label maker - but the aluminum tags are from Cam Creaux. Link to labels in description!
Solid info! What shelves are you using in the background tho?
@@JowiiTV thank you! These are the storage racks from Costco!
Loving the green/purple lights, names?
@@tanner.quintero these are the Nanlite PavoTube II 60XR! Thanks for the comment!
Nice. TrekPak price is kinda steep, but I have one for my 1650 and I love it :D.
@@JoATTech it definitely is, but in the long-term with how modular it is, I think it pays off. We went through several sets of foam as we reconfigured and it got beat up from use
@@Gloryvisuals But it depends how big the changes are for the trekpak. If they are revolutionary, the included excess might be not enough :D. I know that from experience :D.
Also if you are from 1st world country it's not that expensive. For me it's 4 times more expensive, cause our currency is shit (1/4 of a dollar - but the price is the same as in US).
Title: The BEST WAY to organize your camera gear
:47 "Im not trying to tell you this is the best way to organize your gear"
LOL. When the editor doesn’t write the title 😂
@@Gloryvisuals hahaha I love it
Why put a bright light right by your head pointing at the camera?
It’s purpose is as a kicker. Normally I’d have it out of the shot but the whole point of our setup is to have gear in the background. It’s set to 1% brightness 😊
i need links to everything
I’ll work on it! We’ve got a Kit page so I’ll update it and post the link to the description!
Just a comment for the algorithm ;)
@@ScheelPhillip hey thanks!! 😊
Nothing says PRO like a pelican case that is covered with stickers.😅😅
@@mikegustafson6679 guessing you’re meaning this as sarcasm, but ironically it’s spot on. Our clients get to see the places we’ve been, that our cases are used and worn, and the fact that we have a personality. And we’ve gotten nothing but positive comments about them 😊 It ain’t that serious homie.
👊😎👨🚀
Maybe cut your gear by 75%
@@sammorganmoore why?
@@Gloryvisuals Ive never seen so many bits. you are drowning in bits :)
@@sammorganmoore I'm so confused lol. Care to explain what you mean?
@@Gloryvisuals I dont need free advice on organising my gear. Im giving you some free advice. Leave 75% of your gear at home :)
@@sammorganmoore thanks for that - but this is simply terrible advice lol. We bring (and charge the client for) the gear needed to execute the project. Not only is it more profitable, but if you know what you’re doing it adds to the production value and helps you create better work. Have a nice day!
If you get. media pass, you check over sized bags at a flat rate
@@Marcus_Visbal yep just did this for the first time last week. You can actually create your own media passes, we just designed them and laminated them and they worked just great.