Printer Cleaning Kit - Get Yours Now & SAVE $! [CLICK THIS LINK] 👉 geni.us/wArXsZT 502 Epson Ink 👉 geni.us/O9Y0hO Exclusive Support 👉 geni.us/BPChannelMember
its been months since this video posted; i have just ordered the cleaning solution and will be trying it in the next few days. My 1500 has Eco Solvent ink, so im considering it a Giant Paper Weight at this point. I really am hoping this will help however i will understand if it doenst since this ink type is not for this printer. Still any pointers would be greatly appreciated. THANK YOU in advance for any additional pointers for this type of ink and also for your detailed video 😃
This is seriously the best how to video I have seen! Straight the point, no dragging it out, and I could actually follow it and see what is being done. Thank you!!!
**UPDATE** This worked for me, MAKE SURE you do the wait times and follow the instructions. After waiting the 24 hours to turn it back on, did the POWER head cleaning I waited the additional 24 hours and ran a nozzle check, then had to run a regular head cleaning and everything was perfect after that!
Nozzles dry up faster than on my old Designjet models lol. I can leave them of for 2 weeks and it will still come out fine. Epson is just one of *Those* brands
I looked through a bunch of the comments, but couldn’t find my question answered. I just set up the printer last night (6-1-24) and did all the charging and print tests. I cannot get my yellow ink to print. Would I need to do this? Thank you.
Thank you! I was going to try “charging” it again but did a couple of more yellow color ink purges first and all of a sudden it worked.. 🤗. Thank you again for replying so promptly and for all your advice!!
Question. Did you wait 12hours before using after you did the power clean? In all you would have to wait 24hrs after cleaning and 12hr after power clean?
@@BestPrinters omgggg another one lol... ok will do like it started printing black pages all over and noticed inside the printer that there was ink on the right side inside the printer. So I took out all the ink out and waiting on some new ink to replace the whole ink. Thank you so much for responding!
My printer now has a print jam error. I've made sure there is absolutely no paper anywhere. Took it back apart and put it back together to make sure everything is correct but still getting the error 031006 🥺 any advice?
thank you for your video, i did the cleaning because my printer is not printing a teal color (it did before) it seemed like it was missing the whole yellow color because it would only print the image blue. i did the cleaning but didn't help :( also when i do a print nozzle check all my color print beautifly, but when i send my image to print all the yellow disappear :( i don't know what to do anymore!! please help!
I have tried this twice now and still not getting anything to print. The first time actual ink came out and this second time only colored water so I know it’s not clogged anymore. Also all of my magenta cleaner comes out of the yellow nozzle. Any ideas?
Thank you for this video! I was able to do it all on my own; with NO printer troubleshooting experience. I am pretty techy and I know that helped me some, but think I could've done it no matter with your step-by-step instructions. You were very thorough in your descriptions and it fixed my problem with my Ecotank 15000 that I converted to sublimation. THANK YOU SO MUCH!
hi i follow your instructions and my black ink is still not going into the printer all of the other inks when thru expect the black NEED SOME HELP PLSSSS
I apologize I could not get to your comment. If you would like support, expedited responses and member only videos please sign up for a membership here 👉 geni.us/BPChannelMember
I followed every step, waited 24 hours, did a power clean with a new maintenance box. Was told to wait 12 hours after power clean to use printer. Now when I turn on the printer I get error code 031004. Any chance you know how to fix this? I think my printer is fried
You followed all the instructions. The printhead may have already been on it's way out. You can try leaving off for another 24 hours and unplugging try powering back on that may work.
I did exactly this procederé because the magenta wasn't printing, but even after the cleaning, it still doesn't print that color. Any others tip would be helpful
Great Video.. Question, I have this printer which is only two months old. I have ink coming through the seam of the printer which I found out is on the side of the maintenance box. I did a large sublimation job. My maintenance box is only showing half used, do you think I should change it now?
I have a large clicking sound when the cartridge reaches the end while printing after doing this process. Any idea what this is. It sort of sounds like a clunking sound
I have this computer and I love your video so easy. BUT, the cyan is totally clogged it will not take the cleaning solution it just explodes off the tip. Any suggestions? All the other colors cleaned well.
Hi, please visit bestprinterstech.com and click on get support. That will take you to several videos on how to warm up the cleaning fluid because that's what you're gonna need to do in order to break that blockage.
Thank you so much for this informational video. Have been having issues with the black ink on my epson and tried replacing maintenance box etc and nothing had worked. My husband just helped with doing the steps in your video now gotta wait 24 hours and hope it worked!! fingers crossed!
Mine is still not printing correctly even after using the cleaning solution. It's only one color that is not printing correctly on the print check sheet.
On the min 10:04 that lid on top comes off? Because it does looks like it should be remove in order for the tube to go in but ion your video it doesn’t show how. Please help.
I just did a complete cleaning about a month ago with this cleaning. It was printing really well. Can i do it again ? Could I have not done it right should I do it again?
Only you can decide if you need to do a second cleaning if you feel that the front quality can improve even more or that you did not sufficiently solve the problem the first time doing it the second time will absolutely benefit you.
I have completed the steps and prior to using the solution I completed many power and print head cleanings. I am still only getting the top half of black text when printing the nozzle check, this is so frustrating. Your video was clear and helpful.
Try having some grace with yourself, this process can require a lot of patients. I recommend starting from the beginning and redoing the cleaning and maybe that you have to do it several times, but don't rush it this process does work. It just takes time with some printers, especially.
Did the cleaning,topped off the ink waited 24 hours. Ran the power clean. Did a nozzle check and the black is faint/non printing. Replaced the waste ink bin as well as it was full. What should be my next step? Should I wait and run another power clean?
Another thing you could do is just run a deep cleaning. It will be a lot less ink usage but you still may have to run it several times until your color returns. You were on the right track. This is a very common thing that happens through this cleaning.
thank you for your tutorial! so easy to follow. my black and yellow were good prior. I did all the steps but HELP. No ink is coming out at all now. Should I do it again? or is there something else I should do. .. thank you so much!
You can repeat the process, and make sure that your ink is full when doing things like power, cleaning, and deep cleaning. Also, consider warming up the cleaning fluid and then reapplying.
I have tried all the steps to clean my print head and it’s still has lines going through the black ink. Even the nozzle check page does not print the words. And the alignment pages does not print out either. But when I print a purge page it does print black with narrow gray lines. Is there anything else that I can do? Thank you
Clearly, your printhead is functioning properly. I have seen this problem before. Well, you will want to do is check if the printer needs a software update and also check your print quality settings. You would be surprised to find sometimes the settings are not set correctly to print.
This is such a great video and so easy to understand. I have a question, though. Back story - I printed about 20 pages without problem, but the next day there were lines that wouldn't fix with cleaning, purge page, etc. Cyan was the only color affected. We've followed your directions 3 times now, but there is still a problem with the cyan. With nozzle checks, head cleanings, and power cleanings, we're still getting major broken lines in cyan. Any idea where we can go from here? Thank you!
Hi, thank you for the comment, I know it may seem like you recently changed the ink on the printer, but that is what I would check at this point I would layoff on the cleaning kit cleanings. And only do nozzle, cleanings and power cleanings like you've been doing, but I would make sure that the ink is totally full. This will ensure that there is enough volume of ink entering the system.
@@BestPrinters thank you. We'll try that. When we've done power cleanings, the level on cyan doesn't change much, but all the others go down pretty quickly. We almost saw a positive change after a couple nozzle checks, but the next nozzle check/cleaning, it went back to the same 2 lines that have big portions missing. I appreciate your help.
@@BestPrinters Hello, I'm not sure if you are able to help. I ordered the kit and followed all directions in your video to a T. I am still getting black lines in my yellow ink. Some go the whole way across the page very faintly, but on almost every purge page there is a small section of teeny black lines. They appear in the same place on every print out. I have been battling this for months...so much wasted ink, paper, and time. Any other suggestions?
Still not working for me not sure what I’m doing wrong 😢 I followed all the steps I ran the cleaning solution until the paper towel was coming out clear connected everything and waited 24 hours. Unfortunately my maintenance box was full so I had to order a new one so I had to wait a few days before I could run the nozzle check and it’s still giving me the same issue
I just completed this cleaning and so now i wait the 24 hrs to turn on again. But im worried tht the clog is also in my lines. I wld like to know wht to do- then. @frankiesauceda9215
@@BestPrinters NOOO! Don't do it. I did that and now the maintenance box needed replacing. I did that and still prints blank. It ruined my printer. Not your fault. I shouldn't have done it.
Am I the only one who can't get the print head cover off? I got it lose but the left side won't release so I can take it off. I've been trying for the past 20 minutes and don't want to brake it. The little long piece won't slide out. What am I doing wrong here??
My cyan won’t print. I’ve unassembled the printer as you directed and I’m looking at the cyan cartridge and it’s empty all the others have ink in them. Do you think this is a clog in the cyan line or is it a clogged print head?
Not really once you've already done the cleaning and you waited 24 hours. You can begin doing other power, cleanings, and nozzle checks consecutively after that
well did u follow the instructions? one crucial part he mentioned was, WAIT 24 hours BEFORE you plug in the power and power it on. Did you by chance not follow this step? that could possibly explain why you are having issues. the other crucial part he mentioned was deep cleaning at the end to push back the ink into the printer.
😊I've done print head cleaning before, but this is the first printer that I have not been able to remove the print head. Thank you, you instructions were very simple and detailed. I am waiting the 24 hours right now but feel confident that my ET 15000 will work again. Will update in 24 hours.
@BestPrinters I also followed all the instructions including deep cleaning and was only printing out yellow so I was going to give it another power clean the next day (which is today) and it won't turn on at all.
just curious....my black and yellow are the issue and I can't push the cleaning solution through the black, it goes through fine for yellow. Any recommendations?
Hi printer guy... I just bought a used et15000 to convert to sublimation printing. Can you make a video for this process? I'm sure it envolves flushing the tanks and lines besides the heads.
I have a Epson ET 15000 and I am getting nothing but blank pages when trying to print. I tried cleaning the print head but can’t get liquid to go thru the nozzles. Any help or suggestions? TIA
We’re you able to fix it? I was able to get the solution through all the others except one. It’s giving me a hard time pushing the warm/hot solution through
WOW! Excellent video! I just ordered the cleaning kit and can’t wait to do this. I will update when I have done this. Feeling really positive that you have solved my problem.
That's totally normal, when you install ink and start to print again, everything will go back to normal as far as yellow printing out of the yellow nozzle and magenta printing out of the magenta nozzle.
Hello for whatever reason I still don’t have coming out after waiting 24 hours after the printhead cleaning. I did the power clean only the black comes out. The other colors not working
Hi Printer guy! I followed your instructions, and it went pretty well after i got all the screws out---then when putting the screw back in under the plastic it popped up. What can I do and what's it called?
We apologize I could not get to your comment. If you would like expedited responses and member only videos please sign up for a membership here 👉 geni.us/BPChannelMember
Ok I followed all the steps ( I have converted mine to eco solvent) and now it’s printing blank I did the power cleaning after also .. so do I need to repeat the cleaning solution process ? or just do another power cleaning or print head cleanings ? Also had a question.. when pushing the solution through magenta it came out through the yellow. Does that mean it’s still clogged ? Cause when I did yellow it came out through magenta also instead of flushing out under the print head but black and cyan did not do that. Thank you !🙏🏻
The process will be very similar if not almost exact to the Eco tank 16,600. There may be a difference on how you access the printhead and I would just be maybe you have to loosen some additional screws, but that's about it.
Excellent video!! ⭐️⭐️⭐️⭐️⭐️ I unfortunately, unplugged the cables when I opened the top of my Epson L3256 printer. I did all the cleaning as per your video but where goes 2 of the 3 cables? 😢😢😢 Please I need your help 👐🏻🙏🏻
I’d like to know if your yellow ever worked again?? I’m on my second round on my magenta and hoping it works. The lines are thicker now after first cleaning .. thank you
If it doesn't work the first time, then try again. In the past I've had to do several cleanings for her to work. It just depends on the printer and the severity of the problem.
What do we do if we buy the product and this doesn’t fix it? My printer is 100% clogged, no ink moved in power cleaning and nothing prints out on nozzle check
I will try another cleaning this time with warmed up fluid. Also make sure your ink is totally full when you do a power cleaning to get ink back in the system.
![Epson ET 2800, 2803, 2700, 4800 Printhead Cleaning - NOT PRINTING Color, Black, Blank Pages [FIXED!]](http://i.ytimg.com/vi/L1lCvMagC3Q/mqdefault.jpg)
![Epson ET 2800, 2803, 2700, 4800 Printhead Cleaning - NOT PRINTING Color, Black, Blank Pages [FIXED!]](/img/tr.png)
Printer Cleaning Kit - Get Yours Now & SAVE $! [CLICK THIS LINK] 👉 geni.us/wArXsZT
502 Epson Ink 👉 geni.us/O9Y0hO
Exclusive Support 👉 geni.us/BPChannelMember
I notice when I put the cleaning tube in the yellow section, the solution comes out of the magenta section and vice versa. Is this normal?
Yes, that is normal
Mine doing the same thing, I warmed it up it’s still coming out of one another. What I do? Or what did you do?
its been months since this video posted; i have just ordered the cleaning solution and will be trying it in the next few days. My 1500 has Eco Solvent ink, so im considering it a Giant Paper Weight at this point. I really am hoping this will help however i will understand if it doenst since this ink type is not for this printer. Still any pointers would be greatly appreciated. THANK YOU in advance for any additional pointers for this type of ink and also for your detailed video 😃
Stick to the process, make sure your ink is full when doing a power cleaning after using the kit. Best of luck!
This is seriously the best how to video I have seen! Straight the point, no dragging it out, and I could actually follow it and see what is being done. Thank you!!!
**UPDATE** This worked for me, MAKE SURE you do the wait times and follow the instructions. After waiting the 24 hours to turn it back on, did the POWER head cleaning I waited the additional 24 hours and ran a nozzle check, then had to run a regular head cleaning and everything was perfect after that!
Awesome I'm glad it was helpful!
Nozzles dry up faster than on my old Designjet models lol.
I can leave them of for 2 weeks and it will still come out fine. Epson is just one of *Those* brands
Yes you have to be printing frequently with these printers.
After power clean do we need to wait the normal 12-24 hours to start printing again?
Yes
I looked through a bunch of the comments, but couldn’t find my question answered. I just set up the printer last night (6-1-24) and did all the charging and print tests. I cannot get my yellow ink to print. Would I need to do this?
Thank you.
Try charing the ink one more time and if the issue persists then you may need to do this cleaning.
Thank you! I was going to try “charging” it again but did a couple of more yellow color ink purges first and all of a sudden it worked.. 🤗. Thank you again for replying so promptly and for all your advice!!
My ink spilled inside of my printer because it was turned upside down and now it won't work helppp
Will it power on? Please respond in a different comment if you would like a reply.
Question. Did you wait 12hours before using after you did the power clean? In all you would have to wait 24hrs after cleaning and 12hr after power clean?
Do you have a video on how to clean the print heads on Epson et 16600
No, but I'll be doing a video on that model later this year.
I did everything you did. Now it's printing blank. Pls help. What do i do?
Repeat the cleaning process.
@@BestPrinters No it doesn't work and ruins the maintenance box.
Ok what if now it's printing like smear old black ink on your images? Do I need to do another cleaning?
Yes it will require another cleaning.
@@BestPrinters omgggg another one lol... ok will do like it started printing black pages all over and noticed inside the printer that there was ink on the right side inside the printer. So I took out all the ink out and waiting on some new ink to replace the whole ink. Thank you so much for responding!
does this help with smearing/smudge marks?
Yes ma'am
My printer now has a print jam error. I've made sure there is absolutely no paper anywhere. Took it back apart and put it back together to make sure everything is correct but still getting the error 031006 🥺 any advice?
I have ET15000, just did power clean and it says everything will be improved after 12 Hours.
nice "precision" pocketknife screwdriver you're using there...
You wish you had my pocketknife screwdriver skills.
I’ve done this three times and can’t get it to work 😢
Warm up the solution.
Thank you Thank you Thank you!! It worked!! my colors are actually brighter!!! I feel like you saved my life and business😃!! New Subscriber!!!😊
Awesome!
Wow!! I guess my comment was deleted. SMH.
How can I help? Please respond in a new comment so I can get notified.
Printer doesn’t print after cleaning. What can I do?
Run power cleaning, and or repeat the entire cleaning process. make sure ink levels are totally full.
I did the cleaning, No ink was used to refill the head and nothing is printing on the paper. Help please I have a big order to fill. Thanks
This didn’t work for me. Still printing blank pages.
hey Would I be able to do this if I converted the printer to eco solvent ink ?
Yes
Do I need to wait the 12 hours after power cleaning
More like 24 hours.
thank you for your video, i did the cleaning because my printer is not printing a teal color (it did before) it seemed like it was missing the whole yellow color because it would only print the image blue. i did the cleaning but didn't help :( also when i do a print nozzle check all my color print beautifly, but when i send my image to print all the yellow disappear :( i don't know what to do anymore!! please help!
Hey, thank you for watching. You may want to consider doing the cleaning one more time. Try warming up the cleaning fluid.
Help mine will not print nothing do i have to do this
YES!
I have tried this twice now and still not getting anything to print. The first time actual ink came out and this second time only colored water so I know it’s not clogged anymore. Also all of my magenta cleaner comes out of the yellow nozzle. Any ideas?
Did you run a power cleaning yet?
@@BestPrinters yes, ran a power cleaning to push ink back into it and my ink levels didn’t change
I need to remove the sitting ink and add new? Not just top it off?
You can top it off.
I received the code 000031 and don’t know what to do 😢. Please help.
Did all of this now my printer is giving me an error code 😢 031006
Thank you for this video! I was able to do it all on my own; with NO printer troubleshooting experience. I am pretty techy and I know that helped me some, but think I could've done it no matter with your step-by-step instructions. You were very thorough in your descriptions and it fixed my problem with my Ecotank 15000 that I converted to sublimation. THANK YOU SO MUCH!
Awesome! So glad to hear this!
hi i follow your instructions and my black ink is still not going into the printer all of the other inks when thru expect the black
NEED SOME HELP PLSSSS
I apologize I could not get to your comment. If you would like support, expedited responses and member only videos please sign up for a membership here 👉 geni.us/BPChannelMember
I followed every step, waited 24 hours, did a power clean with a new maintenance box. Was told to wait 12 hours after power clean to use printer. Now when I turn on the printer I get error code 031004. Any chance you know how to fix this? I think my printer is fried
You followed all the instructions. The printhead may have already been on it's way out. You can try leaving off for another 24 hours and unplugging try powering back on that may work.
I did exactly this procederé because the magenta wasn't printing, but even after the cleaning, it still doesn't print that color. Any others tip would be helpful
Repeat the cleaning process and make sure to do a power cleaning. Also make sure that magenta is totally full of ink when doing all of this.
Hi man good job🔥, i have question, do I have to remove all the ink from the tank to carry out maintenance?
You really don't have to remove all of the ink from the tank. You can just add additional ink on top of the already existing Ink.
My printer is now dead. She turned off and does not want to turn back on. SMH
Great Video.. Question, I have this printer which is only two months old. I have ink coming through the seam of the printer which I found out is on the side of the maintenance box. I did a large sublimation job. My maintenance box is only showing half used, do you think I should change it now?
if you have income through the seams, I would definitely change the maintenance box
I have a large clicking sound when the cartridge reaches the end while printing after doing this process. Any idea what this is. It sort of sounds like a clunking sound
It could be a number of components
I am crying in my stencil ink for etm1170 I hope one of these videos solves my clog and weird error message 😢
This should help
I have this computer and I love your video so easy. BUT, the cyan is totally clogged it will not take the cleaning solution it just explodes off the tip. Any suggestions? All the other colors cleaned well.
Hi, please visit bestprinterstech.com and click on get support. That will take you to several videos on how to warm up the cleaning fluid because that's what you're gonna need to do in order to break that blockage.
I did this for the pink and now no color is coming out?? What do I do ?
Well well i think I messed it up!!! lol now it won't turn on )= at allllllll
I accidentally turned it on before 24 hours. Did I just break it?
Do you have any error codes? (Please reply in a different comment if you would like a reply.)
Thank you so much for this informational video. Have been having issues with the black ink on my epson and tried replacing maintenance box etc and nothing had worked. My husband just helped with doing the steps in your video now gotta wait 24 hours and hope it worked!! fingers crossed!
Great, if it doesnt work the first time I have found warming up the cleaning solution really helps.
@@BestPrinters strange thing the test is coming out with breaks still in the black but when I print anything it comes out perfect?
I have a bad problem I got everything done but I dropped a screw inside the computer and cannot find it
Its ok, but now you need to buy one of those small screw sets from Amazon.
Should I drain the ink tank first. It's just my yellow that's not working
Yes
Now there is black in my yellow and magenta and some horizontal lines are missing :(
The cleaning process and do another power cleaning. Make sure your ink is full when you're doing all of this.
Mine is still not printing correctly even after using the cleaning solution. It's only one color that is not printing correctly on the print check sheet.
You can do another cleaning or power cleaning that should help.
What if i can’t get the clogged one to push through????? It’s that stopped up
Check out my recent videos on warming up cleaning fluid to break a blockage like this
On the min 10:04 that lid on top comes off? Because it does looks like it should be remove in order for the tube to go in but ion your video it doesn’t show how. Please help.
Yes 8:12 shows you how.
I just did a complete cleaning about a month ago with this cleaning. It was printing really well. Can i do it again ? Could I have not done it right should I do it again?
Only you can decide if you need to do a second cleaning if you feel that the front quality can improve even more or that you did not sufficiently solve the problem the first time doing it the second time will absolutely benefit you.
I have completed the steps and prior to using the solution I completed many power and print head cleanings. I am still only getting the top half of black text when printing the nozzle check, this is so frustrating. Your video was clear and helpful.
Try having some grace with yourself, this process can require a lot of patients. I recommend starting from the beginning and redoing the cleaning and maybe that you have to do it several times, but don't rush it this process does work. It just takes time with some printers, especially.
I already did a power cleaning before doing this, will it damage my printer if I do this and another power cleaning?
I cannot guarantee it wont damage the printer, my advice is to wait 24 hours before doing another power cleaning.
Did the cleaning,topped off the ink waited 24 hours. Ran the power clean.
Did a nozzle check and the black is faint/non printing.
Replaced the waste ink bin as well as it was full.
What should be my next step? Should I wait and run another power clean?
Another thing you could do is just run a deep cleaning. It will be a lot less ink usage but you still may have to run it several times until your color returns. You were on the right track. This is a very common thing that happens through this cleaning.
I was only having issue with cyan, now none of the colors are coming out
It didn’t work for me, I think the tubes are clogged 😞
Running a power cleaning
Do you need to empty the ink from the tanks before you do this?
No need
thank you for your tutorial! so easy to follow. my black and yellow were good prior. I did all the steps but HELP. No ink is coming out at all now. Should I do it again? or is there something else I should do. .. thank you so much!
You can repeat the process, and make sure that your ink is full when doing things like power, cleaning, and deep cleaning. Also, consider warming up the cleaning fluid and then reapplying.
Nothing came out of magenta and yellow when I injected the cleaning fluid.
What I mean the fluid is
Coming out clear
I have tried all the steps to clean my print head and it’s still has lines going through the black ink. Even the nozzle check page does not print the words. And the alignment pages does not print out either. But when I print a purge page it does print black with narrow gray lines. Is there anything else that I can do? Thank you
Clearly, your printhead is functioning properly. I have seen this problem before. Well, you will want to do is check if the printer needs a software update and also check your print quality settings. You would be surprised to find sometimes the settings are not set correctly to print.
Thank you!!@@BestPrinters
This is such a great video and so easy to understand. I have a question, though. Back story - I printed about 20 pages without problem, but the next day there were lines that wouldn't fix with cleaning, purge page, etc. Cyan was the only color affected. We've followed your directions 3 times now, but there is still a problem with the cyan. With nozzle checks, head cleanings, and power cleanings, we're still getting major broken lines in cyan. Any idea where we can go from here? Thank you!
Hi, thank you for the comment, I know it may seem like you recently changed the ink on the printer, but that is what I would check at this point I would layoff on the cleaning kit cleanings. And only do nozzle, cleanings and power cleanings like you've been doing, but I would make sure that the ink is totally full. This will ensure that there is enough volume of ink entering the system.
@@BestPrinters thank you. We'll try that. When we've done power cleanings, the level on cyan doesn't change much, but all the others go down pretty quickly. We almost saw a positive change after a couple nozzle checks, but the next nozzle check/cleaning, it went back to the same 2 lines that have big portions missing. I appreciate your help.
I am at wits end. I keep getting horizontal black lines running through anything that uses yellow. Do you think this would help with that?
Yes this cleaning will solve that problem.
@@BestPrinters Hello, I'm not sure if you are able to help. I ordered the kit and followed all directions in your video to a T. I am still getting black lines in my yellow ink. Some go the whole way across the page very faintly, but on almost every purge page there is a small section of teeny black lines. They appear in the same place on every print out. I have been battling this for months...so much wasted ink, paper, and time. Any other suggestions?
My line super clogged warm or hot solution its not going through
Any suggestions?
Hold pressure for 1-2 minutes straight with hot solution.
I did that and still clogged. This one is not budging at all. I tried to use forced air pressure and still nothing. Any other suggestions?
Help!!! I can't get the liquid to press through😢
Warm up the solution.
Still not working for me not sure what I’m doing wrong 😢 I followed all the steps I ran the cleaning solution until the paper towel was coming out clear connected everything and waited 24 hours. Unfortunately my maintenance box was full so I had to order a new one so I had to wait a few days before I could run the nozzle check and it’s still giving me the same issue
You may want to try warmed up cleaning fluid. You can find videos on this channel or my website bestprinterstech.com.
@@BestPrinters I tried that as well and still nothing but I think the problem is coming from my lines not the print head
I just completed this cleaning and so now i wait the 24 hrs to turn on again. But im worried tht the clog is also in my lines. I wld like to know wht to do- then. @frankiesauceda9215
Doesn’t the power cleaning fill the maitanence box and then that’s it for the printer?? Help please!!!
You Can purchase a new maintenance box & replace it. Bought mine off Amazon 😊
Yes, but you can get a new maintenance box
How did you unlock the print head from the right position? I can't get it to move to the left.
print a nozzle report and unplug the printer while it is actively printing.
I don’t know what I do wrong , but I did the print head cleaning and I follow all the steps you say in the video but I still print blank 😩 help
Thats ok, just repeat the process.
@@BestPrinters NOOO! Don't do it. I did that and now the maintenance box needed replacing. I did that and still prints blank. It ruined my printer. Not your fault. I shouldn't have done it.
Am I the only one who can't get the print head cover off? I got it lose but the left side won't release so I can take it off. I've been trying for the past 20 minutes and don't want to brake it. The little long piece won't slide out. What am I doing wrong here??
My cyan won’t print. I’ve unassembled the printer as you directed and I’m looking at the cyan cartridge and it’s empty all the others have ink in them. Do you think this is a clog in the cyan line or is it a clogged print head?
This is such a great video! Thank you
You're so welcome!
Do I need to wait another 12 hours after doing the power cleaning before doing the nozzle check
Not really once you've already done the cleaning and you waited 24 hours. You can begin doing other power, cleanings, and nozzle checks consecutively after that
I've done two cleanings and my black ink is still broken on the nozzle checks what else can I do!
My printer will not turn back on after cleaning it
well did u follow the instructions? one crucial part he mentioned was, WAIT 24 hours BEFORE you plug in the power and power it on. Did you by chance not follow this step? that could possibly explain why you are having issues.
the other crucial part he mentioned was deep cleaning at the end to push back the ink into the printer.
Yes, please make sure to follow all instruction.
😊I've done print head cleaning before, but this is the first printer that I have not been able to remove the print head. Thank you, you instructions were very simple and detailed. I am waiting the 24 hours right now but feel confident that my ET 15000 will work again. Will update in 24 hours.
@BestPrinters I also followed all the instructions including deep cleaning and was only printing out yellow so I was going to give it another power clean the next day (which is today) and it won't turn on at all.
Is it ok if the paper towel is just wet, no color?
Yes that can be normal.
Can you do one for the 16600? Pleaseee
Yes its next on my list expect a video next month. but honestly the cleaning should be similar to this model.
This video was great so easy to follow and understand. I have to wait my 24 hours now I’ll be back tomorrow with the update. 😅
Great, please update with a separate comment so I can receive it.
I did a nozzle check immediately after I put them back together, no wait time needed.
just curious....my black and yellow are the issue and I can't push the cleaning solution through the black, it goes through fine for yellow. Any recommendations?
Check out the support page on bestprinterstech.com
I ain't getting NOTHING
Do another power cleaning.
I can't get the liquid to go through.
Warm up the solution.
Hi printer guy... I just bought a used et15000 to convert to sublimation printing. Can you make a video for this process? I'm sure it envolves flushing the tanks and lines besides the heads.
I may be able to do a video later this year. However, it is best to start fresh with a new printer when doing sublimation printing.
I have a Epson ET 15000 and I am getting nothing but blank pages when trying to print. I tried cleaning the print head but can’t get liquid to go thru the nozzles. Any help or suggestions? TIA
We’re you able to fix it? I was able to get the solution through all the others except one. It’s giving me a hard time pushing the warm/hot solution through
WOW! Excellent video! I just ordered the cleaning kit and can’t wait to do this. I will update when I have done this. Feeling really positive that you have solved my problem.
So glad to hear it! Thanks for your support!
Hello what do I do when I push the solution in the magenta and it come out of the yellow or the yellow come out of the magenta
That's totally normal, when you install ink and start to print again, everything will go back to normal as far as yellow printing out of the yellow nozzle and magenta printing out of the magenta nozzle.
Thank you
Hello for whatever reason I still don’t have coming out after waiting 24 hours after the printhead cleaning. I did the power clean only the black comes out. The other colors not working
Did you ever find a solution?
Hi Printer guy! I followed your instructions, and it went pretty well after i got all the screws out---then when putting the screw back in under the plastic it popped up. What can I do and what's it called?
We apologize I could not get to your comment. If you would like expedited responses and member only videos please sign up for a membership here 👉 geni.us/BPChannelMember
Ok I followed all the steps ( I have converted mine to eco solvent) and now it’s printing blank I did the power cleaning after also .. so do I need to repeat the cleaning solution process ? or just do another power cleaning or print head cleanings ? Also had a question.. when pushing the solution through magenta it came out through the yellow. Does that mean it’s still clogged ? Cause when I did yellow it came out through magenta also instead of flushing out under the print head but black and cyan did not do that. Thank you !🙏🏻
Did it work for you ???
Is there anyway you can give the screw heads sizes? It would help from stripping out the screws. Thank you
I'm not sure they're small screws
Very good video Thanks for sharing Do you have a cleaning video for a Epson 16600 how to clean it?
Thank you it should be a very similar process
Let me just say... You da man! Worked perfectly. I was down black and cyan. All is well in my printer world again. Thank you!
Great!
Would the process be the same for the ET-16600? If not do you have a video for that printer? Thanks in advance!
The process will be very similar if not almost exact to the Eco tank 16,600. There may be a difference on how you access the printhead and I would just be maybe you have to loosen some additional screws, but that's about it.
cant fill my ink
lift the bottle up and down until the ink starts flowing
Excellent video!! ⭐️⭐️⭐️⭐️⭐️
I unfortunately, unplugged the cables when I opened the top of my Epson L3256 printer. I did all the cleaning as per your video but where goes 2 of the 3 cables? 😢😢😢 Please I need your help 👐🏻🙏🏻
Found where the cables should be plugged in 🎉
Congrats, glad you figured it out!
Did this now my printer says Printer Inspection Mode
Just my yellow will not print I ve tried it all!!! What next??
Repeat the cleaning process until the color returns. It will eventually return just be patient.
Wow.. I just set mine up (with sublimation ink) and only my Yellow will not work. 🤔
I’d like to know if your yellow ever worked again?? I’m on my second round on my magenta and hoping it works. The lines are thicker now after first cleaning .. thank you
Hello, thank you for sharing. Should I remove the ink before the cleaning process?
Yes
@@BestPrintersyou replied no on another comment to this, is it ok to leave the ink in the tanks and the lines like it was when it was last used?
Thank you so much. I'm right in the middle of a very important print job, and both printers took a crap at the same time. Saved both within 1/2 hour.
Glad to hear it!
What if that doesn’t work??
Warranty it. Or it's an expensive repair. Sometimes, the ink dries in the tube if they're faulty. Or it could be an electronics failure.
If it doesn't work the first time, then try again. In the past I've had to do several cleanings for her to work. It just depends on the printer and the severity of the problem.
Thank you for this video! I will let you know if it works for me .
Please do!
Did it work
The cleaning kit I did said only 5ml each 😳 not 20
20 is better
What do we do if we buy the product and this doesn’t fix it? My printer is 100% clogged, no ink moved in power cleaning and nothing prints out on nozzle check
I will try another cleaning this time with warmed up fluid. Also make sure your ink is totally full when you do a power cleaning to get ink back in the system.